NIT NO. 1148/PWD(BMC), DTD. 08.11.2025

Supplying swaged and welded steel tubular pole of following specifications as per IS 2317: 1980 7 Mtr. Length, 62Kg, 410-SP-01

S/F arm bracket of 50 mm bore tubular Pipe (M.S.) of 1.5 m (5’) length for fixing on 75/100 mm pole top including S/F 4 mm thick M.S. plate welded with bolts, nuts & clamps,etc. as required with fabrication work.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling upthe excavated earth pit with shifted soil and ramming properly

Supply & Fixing of Sintex water proof type looping box on newly erected pole size 240 x130x 95 mm depth having hinged front cover & kit kat fuse unit 1no N.L on insulator 1no 4way backlite connector for 2nos compression brass gland for upto 3 core 16 sq.mm pvc /alu cable and having line with rubber gasket front cover with brass machine screw ect. Earthing terminal with lug on steel tubular pole near base including supply & fixing of Clamps with bolts & nut etc complete in all respect as per direct ion of E.I.C

Earthing the steel tubilar pole with 19 mm dia x2.5 mtr. Length G.I rod & 1no. 4 SWG G.I wire up to 4mtr. Length 15 mm dia x 65 long G.I bolt, double nuts & washer including supply of all meterials as per direction of E.I.C.

Supply and fixing of 150 Watt LED Street light high-quality integrated of pressure die-cast aluminium ingress protection IP66 potted driver not a printed circuit board without casing, mounted inside the luminaire. Make- Philips/Havells/Crompton/Bajaj/Benlo.

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC)of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. a) 2 x 22/0.3 (1.5 sqmm)

Supply of 1.1 KV grade 4 core 10 sqmm XLPE insulated and PVC sheathed Al conductor armoured cable as per IS 7098 (Part-I) 1988 with upto date amendments. Make Gloster/Nicco/Havels/Polycab/Mescab or equivalent.

Laying of one cable up to 35 sqmm in under ground trench 460 mm wide x 760mm average depth with bricks proctions on the top of the cable with 8 nos bricks per Mtr. Including filling the sape between the bricks and cable and also the trench with shifted soil laveling up and restoring surface duly rammmed.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables 4 Core up to 16 Sq mm

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. (a) Up to 9 Mtr. Long pole (i) 1st coat of aluminium paint over 1 coat of RO priming.

Supply and erection of the feeder pillar box will be made 2.64 mm. CRCA sheet with 50mm. x 50mm. x 6mm. M.S. angle frame, double hinge door, both front sides with stiffeners handle complete integral canopy & panel outdoor installation, after completion of total primer will have to be applied followed by two coats of finish paint (Synthetic enamel paint grey of approved shade) door sealing arrangement are to be made with soft rubber gasket of thickness not less then 3 mm. cable entry will be bottom only for which detachable type gland plate with punch holes suitable size of PVC armoured cable. The feeder pillar box will have earth bus made from G.I. plate of size 25mm. x 6mm. Electrolytic grade copper plate of size 25mm. x 6mm. for phase & neutral will have to be provided & fixed on insulator & bus bar should be colored coated PVC sleeved, inter-connection between bus & components are to be made by 1.1 KV grade insulated copper conductor of suitable size, 2 nos. full threaded G.I. bolts, nuts, washers are to be provided on two sides of the feeder pillar box as earth stud, the overall tentative of the feeder pillar box will be 1200(H) x 700(W) x 450(D) approx with the following components. 63 Amp. 4 Pole MCB Siemens / ABB/L&T make……...1 No. 16 Amp. 4 Pole MCB Siemens / ABB/L&T make ……...2 Nos. Contractor 70 MNX (L&T) make..............................1 no. Timer (L&T/GE)....................................................1 no. The enclosure shall be suitable IP 55 protection & two nos. danger plate to be provided on the front & rear door of the feeder pillar box.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (a) By ISI-Medium GI pipe.