S.R. to Compound Light of Govt Staff Qtrs (36 Qtrs) Campus at Godhra Dist-PMS..

Name of work :- S.R. to Compound Light of Govt Staff Qtrs (36 Qtrs) Campus at

Godhra Dist-PMS.

Sr. Ratein Rs. Per

Qty. Unit. Description. Amount.

No. Figure Words .

Replacing old & us Flexible 46.46 Rupees Mt

PVC wire by Supplying and Forty Six r

erecting Flexible PVC Paise

insulated multi strand multi Forty Six

85 Mtr 1 core 1.1 kv grade ISI marked Only

copper wires of following size

to be erected as directed.(e)

1.50 Sq.mm 3 core round PVC

Replacing old & us Street 3345.12 Rupees Ea

Light Fittings by Supplying Three

and erecting LED street light Thousand

/ Flood light fittings with Three

High power White LEDs hundred

wattage of 3 Watt and above Forty Five

assembled on single MCPCB, Paise

efficiency more than 130 Twelve

lm/w and corrosion free High Only

pressure die cast aluminum

housing with smooth finish

powder coated and heat sink

extruded aluminium with

diffuser and Polycarbonate

optics/ lenses, with

toughened glass with

company mark/name

engraved or embossed 160 to

270 V,Power Factor more

than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity

ratio >0.45, Luminaire

efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.(

fittings required LM-79 & LM-

80 certificates)(NOTE: Below

description have shown

ranges of Wattage capacity of

LED fittings.The Engineer

incharge may select any

wattage capacity between the

ranges shown.)(A) Street

Light (IP-65), Surge

protection -4KV integral and

,Light must have 440VAC line

supply with over-voltage

protection. 45 watts Cat-III

(B) Flood Light (IP-65), Surge 6088.28 Rupees Ea

4 Nos protection -4KV integral and Six

,Light must have 440VAC line Thousand

supply with over-voltage Eighty

protection.(iii) Above 60 to Eight

90 watts.Cat-III Paise

Replacing old & us SPMCB by 270.68 Rupees Ea

Providing and erecting Two

Miniature circuit breaker hundred

single pole 0.5A to 2A system Seventy

12 Nos 3 and having breaking capacity Paise

10 KA to be erected in Sixty

existing box. confirming to IS Eight Only

8828/1996 with ISI Mark.Cat-

Replacing old & us Earthing 368.65 Rupees Ea

by Providing and erecting Three

Pipe type earthing having 150 hundred

cms.long and 2.5 cms. dia. Sixty

5 Nos 4 galvanised iron pipe with Eight

coupling and buch buried in Paise

specially prepared earth pit Sixty Five

complete with necessary 8 Only

SWG earth wire.

For using salt and charcoal / 171.70 Rupees Ea

coke as required for pipe type One

earthing. hundred

Replacing old & us Alu. Cable 126.25 Rupees Mt

by Providing and erecting One r

XLPE (IS:7098) (I)-88 ISI hundred

armoured cable multistrand / Twenty

Solid Aluminium conductor Six Paise

for 1.1 KV. to be laid on wall Twenty

with necessary clamps or in Five Only

existing trench / pipe of

following size of cables.(B)

Making trench in soft soil of 55.55 Rupees Mt

suitable width of 90 cm deep Fifty Five r

for laying cable or locating Paise

200 Mtr 7 the fault all over the run and Fifty Five

back filling the same and Only

making the surface as normal

Replacing old & us DWC by 62.62 Rupees Mt

Providing & laying approved Sixty Two r

make Double walled Paise

180 Mtr 8 corrugated pipes (DWC) of Sixty Two

polyethylene(conforming to Only

IS 14930 II) with necessary

connecting accessories of

same material at required

depth in existing trench for

laying of cable. below ground

/ road surface for enclosing

cable (A)50 mm outer dia

Replacing old & us Cable 38.38 Rupees Ea

Gland by Providing and, fixing Thirty

heavy duty flange type brass Eight

cable gland with rubber ring Paise

24 Nos 9 for PVC insulated armoured Thirty

cable complete with out going Eight Only

tails, insulating tape etc for

following size of cables.(B)

to 4 core 6 Sq. mm

Replacing old & us Lugs by 6.06 Rupees Ea

Solder less crimping type Six Paise

Aluminium lugs conforming Six Only

to IS suitable for cable of

following size evenly crimped

96 Nos 10 with high pressure tool &

connected to switchgear

brass/cadmium plated nut

bolts in an approved manner.

Providing 1:2:4 cement 809.01 Rupees Ea

concrete foundation & 70 % Eight

PCC from bottom including hundred

excavation for the pole of size Nine

45 x 45 x 100 cm. Deep in Paise

below ground level with One Only

plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper

ground level with necessary

curing and finishing in

approved manner.

( for 4 & 6 mtr pole)

Replacing old & us Pole box 476.72 Rupees Ea

by Supplying & erecting Four

approved make SMC press hundred

moulded composite FRP. Seventy

loop-in, loop-out approx. Six Paise

2mm thick box complete with Seventy

Bakelite connector strip Two Only

5way(3P+N+E),DIN rail for

mounting mob & hinged

doors as per requirement

having locking arrangements

with mounting clamp with

nuts, bolts & washers suitable

for erection on pole with

cable clamps& earth bolt of

following size of

box.(C)150mm x 125mm x

Replacing old & us Bracket by 491.87 Rupees Ea

Supplying and erecting Street Four

light pole bracket comprising hundred

main B Class GI pipe of 4.2 Ninety

cm/require outside dia. One

complete with suitable B Paise

Class G.I. sleeve tubing of Eighty

approx. 45cms.length and Seven

suitable for Only

76.5mm/80mm/require size

of pole top having nuts and

34 Nos 13 bolts for fixing the brackets

and having spread of 0.5 mtr.

Length with 110 deg.with

vertical plane and suitable

welded stiffener reducer and

nipple with check nut

complete painted with one

coat.of Red oxide / PU base

primer and two coats of

Aluminium / PU paint. paint

with following nos of arms.[A]

Single Arm bracket 0.5 Mtr

Painting of street light pole 265.63 Rupees Ea

with bracket complete with Two

two coats of Aluminium paint hundred

for following size of pole.(B) Sixty Five

up to 6 mtr. Paise

I am / We are willing to carried out the work at ____% Above/below _____________________

______________________________________% (Should be written in figure and words) of the

estimate rates mentioned above. Amount of my/our tender work out as under.:

Estimated Amount Estimated Amount

Put to Tender Rs.________________ Put to Tender Rs.________________

(a) I/We hereby declare that I/We have visited the site and fully exquisite myself/ourselves with

the local situation regarding materials, labour and other factors pertaining to work before

submitting tender.

(b) I/We hereby declare that I/We have carefully studied the conditions of contracts, Detailed

specification and other tender document of this work and agree to execute the same

Note 1) The Rates are The Rates are including all taxes, transport charges,storage charges,except

: GST and applicable GST will be paid.

2) The materials covered under contractor should be got approved from the Dy. Executive

Engineer, in charge of the work.

3) The materials and work shall have to be used and carried out as specification in technical

4) All works shall be carried out as per public works Department hand book and Other

specifications of the Dn. Or as directed.

5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be

5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be

deducted from the bill.

6) The material to be used in this work should be approved strictly from Engineer-in-charge /

Deputy Ex. Engineer as applicable.

7) The agency will have to agree to carried out the work as per brand demand of concern

8) Credit of Dismentalled Material to be retained by Agency & cost of Dismentalled Material

Rs.10315.00- will be recoverd from the bill.

(Signature of Contractor) Deuty Executive Engineer

Godhra Electrical SubDivision,

R&B Deptt.,Godhra.

Special condition

As there is replacement warranty has to provide for LED fitting for 3 years, so

security Deposit an amount Rs.13810/- will be released only after completion of warranty

period or the replacement of defective LED fitting whichever is later. Further after issuing

the notice to the contractor for replacement of defective material, he has to take up the

work of replacement within 10 days from the date of issuing the said notice, in case where

the delay for replacement, the contractor shall be penalized by Rs. 100/- per day for such

delay. In case of non replacement of the defective material action will be taken against the

contractor to keep his registration in abeyance for three years and his full security deposit

will forfeited to the Government.