SPECIAL REPAIRS OF BUILDING NO P 95 AT SNC O MESS NAVAL BASE KOCHI AND ADDITION AND ALTERATIONS IN PARIKSHITH BLOCK P 431 AT NAVAL BASE KOCHI INCREASING HEIGHT OF HANDRAILS AND ROOF PARAPET WALL UNDER GE NW KOCHI

Amount

Dismantling single layer MP roofing tiles including ridges compleate all as specified and directed by Engr-in-charge.

Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital or similar pattern roof covering compleate all as specified and directed by Engr-in-charge.

Dismantling timber scantlings under 40 sqcm in sec in fillets, rails, posts, rafters, purlins etc, in unframed works compleate all as specified and directed by Engr-in-charge.

Dismantling boarding, any description, fixed in any position with nails compleate all as specified and directed by Engr-in-charge.

Dismantling battens for tiles, shingles etc spaced exc 15cm of any size incl tilting fillets compleate all as specified and directed by Engr-in-charge.

M & L 2nd class HW sectional area exc 5 & n.exc 15 sqcm clean sawn battens at 30 cm centres for mangalore tiles compleate all as specified and directed by Engr-in-charge.

M & L three coats of creosoting to tiles battens any size and spacing prepared and treated all over (measured overall on oneside only, spaces not deducted) compleate all as specified and directed by Engr-in-charge.

M & L 2nd class HW plain fillets square or rectangular in section clean sawn, secured with nails, but bullnosed, splayed, chamfered or rounded on one edge or face area exc. 13 and n.exc 25 Sqcm compleate all as specified and directed by Engr-in-charge.

M & L 2nd class hard wood weather boarding, clean sawn, plain, 20mm thick or feather edged 20mm compleate all as specified and directed by Engr-in-charge.

M&L for Rolled sections (Tublar sections) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and fixed with angle cleats or other connecting plates compleate all as specified and directed by Engr-in-charge.

M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, over a coat of red oxide on steel surfaces compleate all as specified and directed by Engr-in-charge. (Make-Asian Apcolite or Equal from Berger, Nerolac)

S&F sandwitch PUF panels with PPGL sheet on both the surface with core material 0.4 & internal steel thickness 0.35mm sandwiched between the two steel wall facing 30 mm thick, the density of core materials is 38 Kg/cum (+or- 2)manufactured in continuous line to match the height of 38mm and distance between two crest should be 333.3mm. PUF galmet 30mm including ridges, Note:- Necessary precautions to be taken to avoid any damage to ceiling and in any case of any damages to the existing ceiling , it shall be rectified by the contractor at his own risk and cost compleate all as specified and directed by Engr-in-charge.

S&F prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as compleate all as specified and directed by Engr-in-charge.

S&F half round PVC eaves gutters 150 mm dia with union sockets and joints set in approved jointing compound incl iron brackets for fixing in repairs compleate all as specified and directed by Engr-in-charge.

S&F PVC rain water pipes 110mm dia including bend, elbow, iron brackets for fixing etc complete all as specified in repairs compleate all as specified and directed by Engr-in-charge.

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets compleate all as specified and directed by Engr-in-charge.

M & L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling incl anodised Aluminium snap grid of size 605x605 mm and GI hangers 6mm dia upto 1200 mm length compleate all as specified and directed by Engr-in-charge.

M&L for preparation of new surfaces (Ceiling) applying two coat of oil bound distemper over one coat of primer compleate all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick walls etc incl raking out joints hacking for key scrubbing down with water etc compleate all as specified and directed by Engr-in-charge.

M&L for 15 mm thick cement plaster with cement mortar 1:4 with integral water proofing compound (measured separately) finished even and smooth with out using extra cement compleate all as specified and directed by Engr-in-charge.

Supply only integral water proofing compound compleate all as specified and directed by Engr-in-charge.

Dismaintaing wall/floor tiling incl. cement mortar bedding removing serviceable bles to store and rubbish off the premises as in repair compleate all as specified and directed by Engr-in-charge.

M&L for Virified double/ ultra charged stain free tiles of size 800x800x10 mm thick with approved pattern and colour borders over cement screed 15 mm thick in CM 1:4 compleate all as specified and directed by Engr-in-charge. (Make: Somany/ HR Johnson/ Kajaria)

All as per serial item above herein before but on vertical surfaces as skirting over 10mm thick rendering in cement mortar 1:3 complete compleate all as specified and directed by Engr-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 compleate all as specified and directed by Engr-in-charge.

M&L for Glazed ceramic tiles in vertical surface 600x300x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering CM 1:3 complete compleate all as specified and directed by Engr-in-charge.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) compleate all as specified and directed by Engr-in-charge.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frames) compleate all as specified and directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing compleate all as specified and directed by Engr-in-charge.

S&F factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing compleate all as specified and directed by Engr-in-charge.

S&F 2nd class HW plain solid straight chowkats and frames wrought framed rebated on solid rounded or chamferred put together with glue pinned joints compleate all as specified and directed by Engr-in-charge.

S&F 2nd class HW plain, framed panelled shutters with panel of timber flat on both sides or veneered particle board medium density commercial face veneers, 40mm thick compleate all as specified and directed by Engr-in-charge.

Cutting holes in brick wall built in CM for inserting hold fast etc and making good dismantled portion in CM 1:3 or PCC 1:2:4 type B1 with depth of exc half brick but n.exc one brick compleate all as specified and directed by Engr-in-charge.

M&L for M.S Hold fasts of FI 25 x 3 mm compleate all as specified and directed by Engr-in-charge.

S&F extruded aluminium alloy handles, 150 mm long fabricated type anodised compleate all as specified and directed by Engr-in-charge.

S&F alluminium, anodised, barrel tower bolts of extruded section of size 150 mm long compleate all as specified and directed by Engr-in-charge.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel and fixed compleate all as specified and directed by Engr-in-charge.

S&F Powder coated anodised aluminium frame for door/window with or more rebates including joining cleat for fixing etc compleate all as specified and directed by Engr-in-charge. Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S & F Powder coated anodised aluminium window/ventilator shutters side hung type without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, screws, aanodised aluminum fitting such as peg stays 150 mm long (1 no.), Stainless steel frictional hinges , tower bolt 100mm(2 Nos), suitable handle (1 no.) compleate all as specified and directed by Engr-in-charge. Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S & F Powder coated anodised aluminium 5mm dia hexagonal channel for grill fixed to aluminium frame with aluminium bidding compleate all as specified and directed by Engr-in-charge. Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beeding in squares exceeding 0.5 sqm each pane fix to wood/aluminium joinery ccompleate all as specified and directed by Engr-in-charge. Make: Hindustan Pilkinton glass Works Ltd/ Modiguard.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples and including II nd class hard wood/aluminium beads straight (any size) for glazed or gauged joinery , renewed including mitrted etc compleate all as specified and directed by Engr-in-charge.

S&F for 25mm Stainless Steel curtain rod Fancy type with fixing brackets Complete all as specified & directed by Engr-in-charge.

S&F Vitreous China wash basin, white, flat back, size 580x450mm (for Hospital use) excluding taps, waste chain and plug and porcelain stopper but including brackets all compleate all as specified and directed by Engr-in-charge.

M&L for Vitreous china superior coloured wash down water closet pedestal pattern (P or S trap) with seat cover and with all fittings and connections compleate all as specified and directed by Engr-in-charge. (Make: Hindware category).

S&F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets compleate all as specified and directed by Engr-in-charge.

S&F 15mm bore CP Pillar cock with capstan head screwed high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe and fixed compleate all as specified and directed by Engr-in-charge.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats compleate all as specified and directed by Engr-in-charge.

S&F CP soap dish (Make: Prayag Cat Part No:BA -85) compleate all as specified and directed by Engr-in-charge.

S&F hand shower (health faucet) with 8 mm dia 1 Mtr long flexible tube and wall hook compleate all as specified and directed by Engr-in-charge. (Make: Prayag Cat Pat No: BEA-81).

S&F brass chromium plated bottle trap with inlet or outlet screwed for pipe for connection including necessary packing, union and cap fixed (32 mm bore) compleate all as specified and directed by Engr-in-charge.

S&F 15mm CP bib tap fancy type screwed down, screwed for iron pipes of brass ferrule and fixed compleate all as specified and directed by Engr-in-charge.

S&F 15mm bore CP angle cock screwed down high pressure or butterfly handle screwed down, screwed for iron pipe of brass ferrule and fixedcompleate all as specified and directed by Engr-in-charge. (Make ESS-ESS or equivalent).

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm compleate all as specified and directed by Engr-in-charge.

S&F in repairs 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union compleate all as specified and directed by Engr-in-charge.

M&L for preparation of two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described, over 10cm width or girth compleate all as specified and directed by Engr-in-charge.

M&L for preparation new plastered External surfaces for preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a coat of suitable primer over 3mm thick wall care putty of three layer, complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

Complete removal of existing surface finishes of external wall, preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a coat of suitable primer over 3mm thick wall care putty of three layer, complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for preparation and complete removal of existing treatment and applying two coats of Interior Emulsion (Asian Rayale interior enulsion) over a coat of primer and 3mm thick wall care putty compleate all as specified and directed by Engr-in-charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for preparation of old wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint including preparation of surface compleate all as specified and directed by Engr-in-charge.

M & L for preparation & complete removal of existing treatment surfaces of ceilings and applying one coat of chalk whiting on old plaster surfaces, preparatory to distempering & applying two coats of distemper oil emulsion white or tinted all as specified and directed by Engineer in charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for compleate all as specified and directed by Engr-in-charge.

S&F 50 mm stainless steel pipe grade 302, as in railing including cutting welding polishing and making good compleate all as specified and directed by Engr-in-charge.

S&F 25 mm stainless steel pipe grade 302 as in railing including cutting welding polishing and making good compleate all as specified and directed by Engr-in-charge.

S&F for Stainless steel grade SS 302, 50 mm dia balls compleate all as specified and directed by Engr-in-charge.

M&L precast cement concrete block masonry type B1 1:2:4 (20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:4 compleate all as specified and directed by Engr-in-charge.

M&L 15 mm thick plaster on fair faces of brick or concrete surfaces in cement and sand mortar 1:4 finished even and smooth without using extra cement compleate all as specified and directed by Engr-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc compleate all as specified and directed by Engr-in-charge.

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLS multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic on wall except beam, column and RCC roof and chases cutting incl 1.6 mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylem top cover incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan point controlled by one switch.

All as per item No 70 here-in-before but for one 5 pin 5 amps socket outlet on the same board compleate all as specified and directed by Engr-in-charge.

All as per item No 70 here-in-before but for one 5 pin 5 amps socket outlet an independent board compleate all as specified and directed by Engr-in-charge.

All as per item No 70 here-in-before but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board compleate all as specified and directed by Engr-in-charge.

All as per item No 70 here-in-before but with 4 Sqmm copper conductor including 4 Sqmm copper cable on earth wire for one 3 Pin 16 Amps Socket outlet independent board compleate all as specified and directed by Engr-in-charge.

S&F switch piano flush type 5A one way compleate all as specified and directed by Engr-in-charge.

S&F S/S combination 5 pin 5 Amps flush type compleate all as specified and directed by Engr-in-charge.

S&F S/S combination 6 pin 15 Amps flush type multi purpose compleate all as specified and directed by Engr-in-charge.

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals compleate all as specified and directed by Engr-in-charge.

M & L Taking down 450/350/300mm sweep exhaust fan, preparing the surfaces of exhaust fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rosse to connector to fan compleate all as specified and directed by Engr-in-charge.

M & L Taking down 1200/1400mm sweep ceiling fan, preparing the surfaces of ceiling fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rosse to connector to fan compleate all as specified and directed by Engr-in-charge.

Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No compleate all as specified and directed by Engr-in-charge.

&F Tubelight fitting 1 x20 w ,with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with high luminous efficiency and batten pre wired suitable for use with LED tube with concealed accessories complete. including taking down old one compleate all as specified and directed by Engr-in-charge. Make: Philips Cat part No;TMC501 P 20W 1XT LED P3241+ESSENTIAL LED TUBE 20W 1200MM 20W 865 T8 IND/HAVELLS/WIPRO

Supply & fixing building security light fitting LED 35 W ,IP 65,240 volts ,50 Hz including GI bracket for wall mounting compleate all as specified and directed by Engr-in-charge. Cat No-. ENDURACITYLITEPLATPLUSSL35WLED757SASYBOPC of Havells ,Bajaj,Philips .

S&F 07W LED mirror light fitting with tube and provided with high output diffuser including all electrical connection all as specified and dirceted by Engineer in charge.Cat part no BN021C LED20S PSU CW GR S2 of Philips or Crompton/Wipro

Taking down old DBs from existing position including MCB,s compleate all as specified and directed by Engr-in-charge.

S&F Sheet metal enclosure TPN DB when MCB's to be used 8way with 200 amps bus bar double door compleate all as specified and directed by Engr-in-charge.

S&F Sheet metal enclosure SPN DB when MCB's to be used 8 way with 200 amps bus bar double door compleate all as specified and directed by Engr-in-charge.

S&F MCCB TP 100 amp ,415 volts ,16 KA all as specified and directed Cat part No -408683 of Legrand compleate all as specified and directed by Engr-in-charge.

S&F MCB TPN 63 amp ,415 volts ,16 KA all as specified and directed Cat part No -408683 of Legrand /Indo asian /L&T compleate all as specified and directed by Engr-in-charge.

S&FMCB SPN 6 to 32 Amp ,240 Volts,10 KA compleate all as specified and directed by Engr-in-charge. Cat part No -408617 of Legrand or Indo Asian ,L&T.

S & F in repair SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable eath plug compleate all as specified and directed by Engr-in-charge.

S&FMCB Sp 6 to 32 Amp ,240 Volts,10 KA compleate all as specified and directed by Engr-in-charge. Cat part No -408595 of Legrand or L&T,Indo Asian

S & F ceiling fans complete with electronic type regulator and accessories 230V, 1200 mm sweep, BEE 5 star rated.CG Cat Part Energion HS BLDC/havells/usha Note : Old fans will be deposited in MES store yard compleate all as specified and directed by Engr-in-charge.

Taking down old sub main wiring of any size compleate all as specified and directed by Engr-in-charge.

M&L for sub main wiring with 4 runs of 16 Sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 1 run of 16 Sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good distrubed surface to match with existing surface compleate all as specified and directed by Engr-in-charge. Note -1. 4 runs of 16 Sqmm sub main wire and one run of 16 sq mm for earthing and cassing capping with accesories shall be measured as one unit.

All as per item No 95 here-in-before but 2 runs of 6 sq mm single core FRLSH copper conductor and 1 run of 6 sqmm conductor for earthing compleate all as specified and directed by Engr-in-charge. Note : 3 runs of 6 Sqmm sub main wire and one run of PVC Casing and capping with accesories shall be measured as one unit.

All as per item No 95 here-in-before but 2 runs of 4 sq mm single core FRLSH copper conductor and 1 run of 4 sqmm conductor for earthing . Note : 3 runs of 4 Sqmm sub main wire and one run of PVC Casing and capping with accesories shall be measured as one unit.

Material and labour earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounted from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electorde connected by using GI strip 25×4mm as earthing lead(max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as prrotection pipe for GI wire connected main controll board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel,wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion compleate all as specified and directed by Engr-in-charge.

Material and labour earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounted from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electorde connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as prrotection pipe for GI wire connected main controll board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel,wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion compleate all as specified and directed by Engr-in-charge.

S & F in repair fan regulator electronic step type 100 W, 250 Volts compleate all as specified and directed by Engr-in-charge.

Taking down old stop valve,stop cock,bib cock ,health faucet from existing position including all fittings compleate all as specified and directed by Engr-in-charge.

Supply & fix stop valve (angle type) cast copper alloy high pressure,screwed for 15mm dia CP fancy type (Half turn) compleate all as specified and directed by Engr-in-charge.

Supply & fix of concealed stop cock(half turn) with sliding flange CP fancy type of size 15mm compleate all as specified and directed by Engr-in-charge.

Supply & fix of bib cock long body chromium plated with flange and aerator CP fancy type of size 15mm compleate all as specified and directed by Engr-in-charge.

S&F Gunmetal globe or gate valve 25 mm dia iron wheel head screwed both ends for PVC pipes incl taking out old compleate all as specified and directed by Engr-in-charge.

Supply & fixing of low density polythene pipe 16mm dia (outer),450 mm long for normal water and taking down old one complete with brass union on both sides to suit 15mm GI pipe compleate all as specified and directed by Engr-in-charge.

S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11& plain SDR 11 fittings compleate all as specified and directed by Engr-in-charge. Make:- Supreme

S&F Health faucet ABS body with wall hook & 1Mtr SS braided flexible tube compleate all as specified and directed by Engr-in-charge. (Make-CERA Cat No- Cera F 8030102 ) all as specified and directed including taking down old one

Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated (Make-Havells Cat No- GHWAMGTWH025)/CG/WIpro compleate all as specified and directed by Engr-in-charge.

S&F on wall / ceiling (concealed) CPVC pipe 20mm dia SDR 11 & plain SDR 11 fittings compleate all as specified and directed by Engr-in-charge. Make:- Supreme

Supply and fix in repairs Ball brass valves (PTMT) of size 25 mm dia high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed compleate all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 liters compleate all as specified and directed by Engr-in-charge.

Taking down old unserviceable GI tubing of size 25mm compleate all as specified and directed by Engr-in-charge.

Taking down old unserviceable GI tubing of size 20mm compleate all as specified and directed by Engr-in-charge.

MS BUILDERS

K.V.GEORGE AND COMPANY

Albert Rebello and Company

M/s ANTONY THOMAS AND CO

THOMSONS CONSTRUCTIONS

SUKU CONSTRUCTIONS