RENOVATION WORK OF SEMINAR HALLIN THE DEPARTMENT OF BOTANY AT KARIAVATTOM CAMPUS CIVIL WORK

Amount

Seminar Hall

15.39.2 : Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 metres lead:Thickness above 10mm upto 25 mm

15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

11.49.2 : Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tiles 600x600 mm

15.56 : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

15.57 : Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

od111946/2018_2019 : Providing and fixing teak wood panelling for damaged portions . the panelling with 12 mm teak wood planks 50 x 25 mm T W reeper horizontally fixing in wall and top and bottom ornamental reeper etc complete as per the direction of Dept Authorities

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.99.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

13.103.1 : French spirit polishing :One or more coats on old work

13.68.1 : French spirit polishing:Two or more coats on new works including a coat of wood filler

13.98.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od138207/2018_2019 : labour engaged for shiftingandre arranging the furniture

50.12.2.1 : Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.

od54362/2021_2022 : Supplying and providing chairs of superior quality having overall dimension 60.9 x 99.5 x 64.3 cm made with heavy duty anti rust coated tubular frames, Finish Color Black & Grey, Upholstery Material Leatherette & Spacer Fabric (Godrej Versa neo or Equivalent make subject to sample approval)

od53558/2021_2022 : Providing digital podium with the following specification (Ahuja WSL-2500 R or equivalent make)<br>Wireless Lectern with built in Amplifier and built-in speaker system<br>Provision for connecting external speakers required.<br>Should contain a detachable gooseneck condenser microphone and a reading light for the podium top.<br>Should contain a built-in VHF wireless receiver and handheld wireless transmitter<br>Input : 6.3mm jack for wired mic and a line through XLR connector and stereo auxiliary source through L&R RCA plug<br>Voice priority- Required<br>Built in digital recorder cum MP3 player<br>Separate output connectors for LINE OUT & REC OUT<br>Power- 240V 50Hz<br>Additional items<br> XLR cable minimum 5M length-2 No<br><br> 6.3mm AUX cable minimum 5M length -1No<br><br> RCA to AUX (3.5mm) minimum 5M length -2No<br><br> 6.3mm to 3.5mm jack cable minimum 5M length - 2No

od293977/2020_2021 : providing and fixing vertical blinds for windows including all fittings and labour charges etc complete as per direction of the Engineer <br>

M SYED ISMAIL

P. MANIKANDAN

Bidder Name

RAJENDRAN

P. MANIKANDAN

M SYED ISMAIL