SPECIAL REPAIR TO BLDG NO P-447 (SINGLE JCO) OF 152 AD REGT AT INF LINES JAMNAGAR.

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.

M&L for cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required in wall n.exc half brick complete.

S&F mild steel hold fast and similar confirming to Fe- 290 Grade-E-165 complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. (Make: Sintex / Rajshree / Accucell)

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel designed with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face incl particle board core complete all as specified and as directed.(Make: Sintex / Rajshree / Accucell)

S&F 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed. (Make: M/s Goel Brothers/ M/S Jain Doors / M/s India wood)

S&F100mm butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type B1 (Make: Crown / Ajanta / Jayant)

S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.(Make: Crown / Ajanta / Jayant)

S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised.(Make: Crown / Ajanta / Jayant)

S&F Aluminium anodised barrel tower bolts, 200 mm long, of extruded section. (Make: Crown / Ajanta / Jayant)

S&F coloured aluminium anodised sliding window of 3 tire, frame of section 62mm X 32mm X 1.47 mm or appropriate equivalent section and shutters of section 18 mm X 44 mm X 1.35 mm or appropriate equivalent section fixed with 4 mm thick tinted sheet glass with rubber gasket, handles, locking arrangement and aluminium wire mesh,aluminium powder coated any colour deco grill 6mm dia incl making good jambs, cills etc with CM 1:4 or concrete 1:2:4, type B0 complete all as specified and directed by the Engr-in-Charge.(Make: Hindal co / Indal / Jindal)

S&F in coloured aluminium anodised fixed louvered ventilator, frame of section 63.5mm X 38.1mm X 1.01 mm or appropriate equivalent section with 4 mm thick figured/frosted sheet glass with rubber gasket, handles, locking arrangement etc incl making good jambs, cills etc with CM 1:4 or concrete 1:2:4, type B0 complete all as specified and directed by the Engr-in-Charge.(make: Hindalco / Indal / Jindal)

S&F in repair 25mm dia stainless steel curtain rail, cut in required length and size to fit with opening incl fixing on bracket with necessary screws fitted on bracket and decorative nobs on sides with necessary arrangement complete all as specified and as directed by Engr-in-charge.

S&F in repairs curtain rod side brackets of stainless steel, angular or cantilever type fixed to wall with 02 nos screws on each bracket and fitted screws for fixing curtain rod incl CP/stainless steel carved decorative design plain metal colour nobs with fixing arrangement for curtain rod using a screw complete all as approved and shown by Engr-in-charge.

Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubbing down with water etc.

M&L for Rendering 10 mm thick in CM (1:6) on fair faces of brick wall surfaces, finished even and smooth without using extra cement.

M&L 20 mm thick rendering in two layers of 10mm on external concrete wall surfaces in cement plaster 1:4 with WPC incl finished even and smooth w/o using extra cement all as specified.

M&L for rendering 5 mm thick in CM 1:4 on ceiling to be finished even and smooth without using extra cement.

M&L preparation of newly plastered surfaces of walls and applying two coats of Exterior emulsion paint on one coat of primer all as directed..

M & L for preparation of new plastered surface of wall and applying two coat of oil bond distemper and 3 mm wall care putty all as specified and directed

M & L for preparation of new plastered surface of ceiling and applying three coats of white wash.

M&L for complete removal of existing treatment on ceiling and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coats of oil bond distemper and 3 mm wall care putty all as directed.

M&L preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L Non skid ceramic tiles 7-8mm thick area of each tiles exceeding .0.0.18 Sqm but not exceeding .38 Sqm, in floors etc. set and jointed in neat cement slurry mixed with water proofing liquid compound and pointed in white or coloured grouting chemical to match, over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L Glazed ceramic coloured designer tiles in vertical surface 350x250x7mm/450x350x7mm set and jointed in neat cement slurry and pointed in white or colour cement to match 0ver 10mm thick plaster in cement mortar (1:4) complete all as specified and as directed.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm thick screed bed in CM1 :4 complete all as specified and directed.

M&L 25 mm thick Cement concrete type B-1 , 1:2:4 (20 mm graded aggregate) as in subbase complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to stack bore of pipe 15mm all as directed by Engineer in charge

Ditto all as per item no 32 but bore of pipe 20mm

S&F 15 mm dia Steel water tubes, 'medium grade', galvanised, with all fittings and concealed complete to walls and ceilings or laid in floors including cutting grooves, filled with cement mortar in CM 1:4 complete all as specified and directed.

Ditto all as per item no above but bore of pipe 20mm

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs PVC(SWR) bend any radius, 110 mm dia.

S&F in repairs 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. (Make: Prince / Supreme / Finolex)

S&F in repairs PVC bends any radius 75 mm dia complete all as specified and as directed. (Make:Prince / Supreme / Finolex)

S&F in repairs PVC (SWR)75mm floor trap, plan with frating including jointing with solvent etc complete all as specified and directed by EIC

S&F in repairs bib taps 15mm bore cast copper alloy chromium plated, fancy type, long body, concealed type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed. (Make: Prayag / Jaquar / Cera)

S&F in repairs pillar tap for 15 mm bore pipe, fancy types , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. (Make: Prayag / Jaquar / Cera)

S&F in repairs 100mm dia Overhead Shower alongwith 190mm long shower arm casted, fixed to 15mm bore pipe or union complete all as specified and as directed. (Make:Prayag / Jaquar / Cera / Shakti)

S&F in repairs Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified. (Make : Cera / Prayag / Parryware)

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe. (Make : Cera / Prayag / Parryware)

S&F in repairs PVC valveless syphonic action type ,flushing cistern Low level white,with,with inlet ball valve ,float and handle 10 Ltr capacity including brackets.

Dismantling water tanks and removing store exc 250& n exc 500 ltr complete all as specified and as directed.

S&F Rotational moulded polyethyene water storage tank of 500 ltrs capacity hoisted and fixed in position all as specifed & directed by engr in charge.

S&F 25 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Demolition of concrete of any position and in any position not otherwise specially provided for path complete all as specified and directed

M&L 75 mm thick Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in plinth protection complete all as specified and as directed.

M&L 40 mm thick Cement concrete type B-1 , 1:2:4 (20 mm graded aggregate) as in subbase complete all as specified and as directed.

M&L 100 mm thick Cement concrete type D-2 , 1:4:8 (40mm graded aggregate) as in Interlocking complete all as specified and as directed.

S&F Machine pressed precast Concrete interlocking paver block any shape and size with grey/colour cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 grade all as specified and directed.

M&L sand cushioning/filling under paver block as specified and directed.

Taking down all existing roof treatment and demolition of cement concrete padding/levelling course incl wire brushing and cleaning loose dust etc from surfaces of RCC roof incl flashing and junction of parapet complete all as specified.

Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc incl brushing neat cement slurry with 3.0 kg of cement per sq metre complete all as specified.

M&L 25mm thick PCC 1:2:4, type B0 (using 12.5mm size stone aggregate) as levelling course incl finished even and smooth using extra cement complete all as specified

M&L 15mm thick screed bed in cement plaster 1:4 on padding layer for roof treatment with WPC complete all as specified

Supply only Integral waterproofing compound

M&L for water proofing treatment to non-accessible roof slabs by applying a coat of approved bituminous primer (conforming to IS-3384) @ 0.3 ltr per sqm on finished concrete surface of roof and laying 3mm thick APP PL/MT membrane (starting at lowest point in slope roof) over hot blown bitumen 85/25 grade or equivalent used for DPC purpose, by using a LPG torch to fuse plastic membrane on bottom face of membrane and applying uniform pressure with a roller/wet cloth to ensure to remove entrapped air, if any, with overlap joints of 100mm in longitudinal direction and 150mm in transverse direction complete incl finally applying two coats approved aluminium paint over membrane complete all as specified. (Make: Tikidan/Texsa India Ltd/M/s STP limited)

Dismantling boardings, any description, fixed in any position with screws complete all as specified.

M & L 18/19mm thick Pre-laminated particle board, interior grade, prelamination one side with decorative choice lamination & other side balancing white lamination, fixed with nails as in cupboards / cabinets.(Make: Green ply / Eco board / Novapan)

S&F 18/19 mm wide 6 mm thick lipping on veneered particle as in cupboard shutter and shelves complete all as specified and as directed.

S&F 75mm butt hinges, cast brass with mild stell hinge pin , bright polished and fixed, type B11 complete all as specified and as directed. (Make: Crown / Ajanta / Jayant)

S&F Extruded aluminium alloy handles 100mm long, fabricated type, anodisedcomplete all as specified and as directed. (Make: Crown / Ajanta / Jayant)

S&F Aluminium anodised 100mm hasp and staple ,safety type with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. (Make: Crown / Ajanta / Jayant)

Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed surfaces of walls floors etc all as directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall, ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anticorrosive paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick Hylam sheet cover for fixing of switches, sockets etc including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dully complete all as specified and directed at site for the following :

One light/ Fan point controlled by one way switch.

One light point controlled by two way switch.

One Bell point controlled by one switch bell push

One 5 Amps socket on same board with other switches.

One 5 Amps switch socket combination on independent board.

All as per item No-76 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F switch piano flush type single pole one way 5 Amps 230 V.

S&F switch piano flush type single pole two way 5 Amps 230 V.

S & F switch Bell Push button type 5 Amps single pole one way.

S&F switch socket out let 3 pin 5 Amps flush type 230 Volts multipurpose,

All as per item No-81 above but 5 Amps and 15 Amps multipurpose( 3 Pin 15 Amps and one pin 5 Amps controlled by one switch.)

S&F socket out let 3 pin, 5 Amps, 230 Volt multipurpose flush piano type.

S&F in repair Bell Ding Dong AC 230 volts type single pole as directed.

S&F in repairs fan regulator Electronic Step type (min 5 steps) 2module, 120W complete all as specified and directed by Engineer-in-Charge.

S&F lamp holder insulated body with back plate for battern fittings.

S&F ceiling rose surface backelet ISI marked 2 to 3 terminal all as specified.

Supply& Fixing LED batten fittings 4ft 20 Watt (Min 1900 lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete including 2.5 KV surge protector.

Supply& Fixing LED Batten fittings 1ft 5 Watt (min 450 lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete including 2.5 KV surge protector.

Supply& Fixing LED Retrofit lamp 9 Watt white 6500K cool day light Minimum lumens 600 in angle holder complete.

S&F DB sheet metal enclosure 8 way SPN for mounting MCB double door.

S&F Isolators DP 32 Amps all as specified and rupturing capacity 10 KA,

Supply and Fix Isolator TPN 63 Amps 415 Volts rupturing capacity 10KA.

S&F MCB single pole 5 to 32 Amps C series all as specified and rupturing capacity 10 KA,

M&L for sub main wiring with two runs of 4.00 Sqmm single core PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories fixed an concealed of walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 4.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unsheathed cables and one run of earth continuity conductor incl conduit will be measured and paid as one unit length only.

Taking down & Refixing Ceiling fan 1200mm sweep AC, 240 volts,Metal body ,after cleaning , greasing and painting with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan all as specified and directed by Engr in charge

M&L in repair for earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to GI Strip 25x4 mm by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways including charcoal dust and salt in layers all as shown in electrical plate No. 3 of SSR Part-I all as specified and directed. Note : ( i ) The item includes the cost of 7.5 meter GI pipe for protection of earth lead wire & the cost of 7.5 meter earthing lead strip/wire (ii) Irrespective of what is shown on plate No 3 of SSR 2009 Part-I , the cover of earthing pit shall be of precast RCC (1 :2 : 4) type B1 with suitable handle all as specified and directed by Eng-in-charge

Supply & fixing, testing and commissioning 30W LED security light fitting with system output of 3000 lumens & with dedicated street light optics, System efficacy of greater than 100lm/W luminarie should have pressure die cast aluminium LM6 housing. Luminaire should have dedicated street light optics for better uniformity & spacing. Luminarie should have air vents in housing for proper thermal management. Min IP preventation should be IP65. System power consumption (including driver losser) should not exceed 20W .The driver is suitable for built in 5KV surge voltage, open/ shortcircuit protection external surge 10KV protection should be provided complete all as specified and directed.

S& F security light bracket made out of GI pipe 40mm light grade ISI marked 1.5 Mtr long bend to shape as required for LED fittings at site including M S Clamp 2 Nos made out of flat iron 50 X 5mm with necessary nuts Bolts and two coats of aluminium paint over a coat of red oxide primer all as directed.

badri glass and construction

SHAM AND CO