Repairing in all wards

Providing concrete for plain/reinforced concrete P.C.C.GradeM-10(1:3:6) inopenfoundations

600&Brick masonry work in cement mortar in foundation complete exccpting pointing and plastering 1200 as per drawing and technical specification clauses MORD Specific - ations 600 & 1200 Sr.

Plstering with cement mortar (1:4), 12 mm thick on brick work in substructure as per technical specification Clauses 613.4 and 1204 MORD Specific - ations 600 & 1200 Sr.

Construction of un-reinforced plain cement concrete pavement, 15 cm thickness as per design over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 Grade coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side frame work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the framework as per drawing), spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continious operation including provision of contraction and expansion,

RCC work with approved coarse sand and 2 cm guage approved stone grit in 1:1.5:3 in lintels of doors, windows and sunsheds excluding supply of reinforcement and its fixing and binding the same with 24B.W.G.G.I binding wire and including necessary centering and shuttering etc required for proper completion of work. in M-20 Grade MORD Specific - ations 800 & 1200 Sr.

Mild steel or TMT Bars(Fe-500D grade or higher) or HYSD Bars or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel.MORD Specific - ations1000 Sr.

Providing, supply & fixing of 80mm thick ruber moulded vibratory interlocking tiles by high pressure & controlled vibrationmachinehavingplaindimension200X (160+120 mm)withminimum5mmthicktoppingofO.P.Cementmixed with 25%marble powder. The Compressive strength of concretepaverblocksshall notbe less than300mpa&4.5 Kg/Ton including levelling&dressingof surface torequired level&slope, fillingjointswithlocalsandoverG.S.B.andalso including cost of all labour, material but excluding cost of G.S.B. andT&Petc. required forproper completionofwork as per direction of Engineer-in-charge.