Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹2.1 L
Closing Date
26 Dec 2024, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Industrial Areas Development Board
Assistant Executive Engineer-Ele
Supply, Erection, Testing & Commissioning of submersible pumpsets to the Borewell points and arranging power supply to water supply Borewells at Doddaballapura Devanahalli General Industrial Area (ITIR), Bengaluru Rural District.
KIADB/2024-25/EL/WORK_INDENT200
KIADB/2024-25/EL/WORK_INDENT200
Open
Electrical
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
2 documents required · 2 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2019-20 to 2023-24) Mandating satisfactory completion as a prime contractor for at least One Similar Nature of Electrical work involving such as Supply, Erection, Testing & Commissioning of submersible pumpsets to the Borewell points and arranging power supply to water supply Borewells, to an extent of not less than 50% of the amount put to tender (i.e., Rs.69.00 lakhs). (Work executed and work done certificates issued under Joint Venture shall not be considered)
Executed in any one financial year, the following minimum quantities of work (Supply & Erection) (80% quantity of work put to tender): Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government / Public Sectors/Government Undertaking Organizations. (Quantities executed certificates issued under Joint Venture shall not be considered). (1) Submersible pumpset- 10 HP: 24 Nos, (2) PVC insulated submersible cable. 1X3X4 sqmt: 15.11 Km, (3) 9mtr RCC pole: 35 Nos, (4) Rabbit ACSR conductor: 5.77 Km, (5) 9mtr DP Structure: 12 Nos, (6) 11 kV/433V, 25 kVA/63KVA DTC:8 Nos
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A : Maximum value of Electrical engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress, N : Number of years prescribed for completion of the works for which tenders are invited. B :Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the 3 Months.
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2019-20 to 2023-24) Achieved in at least two financial years a minimum financial turnover of Rs.276.00 Lakhs. (Electrical Contract Works Only) (Not less than 2 times the amount put to tender).
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.41.40 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc)
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
List of Financial Resources with Certificates
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
₹3,440
₹2.1 L
17 Dec 2024
17 Dec 2024
30 Dec 2024
19 Dec 2024
20 Dec 2024
Supply, Erection, Testing & Commissioning of submersible pumpsets to the Borewell points and arranging power supply to water supply Borewells at Doddaballapura Devanahalli General Industrial Area (ITIR), Bengaluru Rural District.
PART-A: Providing, supplying to work site, submercible pump set of 150mm dia suitable for borewell and confirming to IS 8034-2003,3phase SS bowl and impeller with low volt motor with all lead and lift...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and with all lead and lift etc, as per s...
Supply and delivery at site of brand new best make Gate valve as per IS 778/1984 with ISI Mark and with all lead and lift etc, as per specification and direction of Engineer in charge. Size 50 mm
Supply and delivery at site of brand new best make Non-return valve as per IS 778/1984 with ISI Mark and with all lead and lift etc, as per specification and direction of Engineer in charge.
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Supply and delivery of Glavanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., wit...
PART-B: Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as pe...
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm with all lead and lift etc, as per specification and direction of Engineer in charge.
GI Pipe B - Class as per IS-1239 GI Pipe - 40 mm Dia with all lead and lift etc, as per specification and direction of Engineer in charge.
Supplying of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lift etc, as per specification and direction of Engineer in charge.
Laying of UG Cables by Trenchless Technology by adopting Horizontal Boring & Drawing of cable includin normal ore size without HDPE Pipe with all lead and lift etc, as per specification and direction...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or oncealed system of wiring with specified IS...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. with all lead and lift etc, as per specification and direction of Engineer i...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. with all lead and lift etc, as per specification and directio...
Labour charges: Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary...
Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm with all lead and lift etc, as per speci...
Making and fixing of Earthing materials pipe type for grounding (Single Electrode with accessories)with all lead and lift etc, as per specification and direction of Engineer in charge
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
PART-B-Line portion: Supply of 9 Mtr long, 150 Kg WL RCC pole with all lead and lift etc, as per specification and direction of Engineer in charge
11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lift etc, as per specification and direction of Engineer in charg...
Supply of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of 11 kV, 45 KN Polymeric Insulatorwith all lead and lift etc, as per specification and direction of Engineer in charge
Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lift etc, as per specification and direction of Engineer in charge
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lift etc, as per specification and direction of Engineer in charge
Spiral Earth Electrode with all lead and lift etc, as per specification and direction of Engineer in charge
Guy concreting with Boulders, Mud and Sand with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of ACSR Rabbit conductor including conductor accessories and sag with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of Caution/Danger Board with all lead and lift etc, as per specification and direction of Engineer in charge
Supply and fixing Anti-clambing device 10 Mtrs with all lead and lift etc, as per specification and direction of Engineer in charge
PG Clamps for Rabbit Conductor with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of DP Transformer Structure using RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of 11 kV, 45 KN Polymeric Insulator with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lift etc, as per specification and direction of Engineer in charge
Supply & commissioning of 11 kV/433V, 25 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with Oil with all lead and lift etc, as per specification and direction of Engineer in charge
Supply & commissioning of 11 kV/433V, 63 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with Oil with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of Earthing materials pipe type for grounding (Single Electrode with accessories)with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of Caution/Danger Board with all lead and lift etc, as per specification and direction of Engineer in charge
Supply and fixing Anti-clambing device 10 Mtrs with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of GI wire 8 SWG with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of Guy wire 7/10 SWGwith all lead and lift etc, as per specification and direction of Engineer in charge
Supply of 11 KV lightening Arrestors,Metal oxide, 9 kv, 5 ka with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of 200A single break GOS with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of HG fuse unit 11KV solid core type with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of LT Protection Kit for 25 kVA and 63 KVA with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of LT Wiring (From DTC to LT Line Through Metering Box & LT Protection Kit) SINGLE CIRCUIT, Al Lead Wire - 50 Sqmm with all lead and lift etc, as per specification and direction of Engineer in ...
Supply of Heavy Duty Long Barrel Copper Lug - 50Sqmm with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of PG Clamp - Rabbit to 50 Sqmm with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of PG Clamp - Rabbit to 95 Sqmm with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of Spacer for DTC Wiring. with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lift etc, as per specification and direction of Engineer in charge
Supply LT Metering box with CTs and necessary wiring for housing ETV Meter with all lead and lift etc, as per specification and direction of Engineer in charge
Supply of LT Metering box with CTs and necessary wiring for housing ETV Meterwith all lead and lift etc, as per specification and direction of Engineer in charge
Supply of LT Electronic Tri-Vector Meter 5 Amps, - 0.5/1.0 Accuracy Class. with all lead and lift etc, as per specification and direction of Engineer in charge
Labour Charges: Erection of 9 Mtr RCC pole with all lead and lift etc, as per specification and direction of Engineer in charge
Fixing of 11 kV, Horizontal Cross Arm with clamps , HTST supports , bolts, nuts and washers for RCC Pole with all lead and lift etc, as per specification and direction of Engineer in charge
Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lift etc, as per specification and direction of Engineer in charge
Erection of DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lift etc, as per specification and direction of Engineer in charge
Fixing of Spiral Earth Electrode with all lead and lift etc, as per specification and direction of Engineer in charge
Erection of DP Transformer Structure using RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lift etc, as per specification and direction of Engineer in charge
Fixing of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lift etc, as per specification and direction of Engineer in charge
Fixing of Caution/Danger Board with all lead and lift etc, as per specification and direction of Engineer in charge
Fixing of Anti Climbing Device (12 Mtr GI Barbed Wire) with all lead and lift etc, as per specification and direction of Engineer in charge
Fixing of 11 KV lightening Arrestors,Metal oxide, 9 kv, 5 ka with all lead and lift etc, as per specification and direction of Engineer in charge
Fixing of 200A single break GOS with all lead and lift etc, as per specification and direction of Engineer in charge
Fixing of HG fuse unit 11KV solid core type with all lead and lift etc, as per specification and direction of Engineer in charge
Fixing of LT Protection Kit for 25 kVA with all lead and lift etc, as per specification and direction of Engineer in charge
Fixing of LT Wiring (From DTC to LT Line Through Metering Box & LT Protection Kit) SINGLE CIRCUIT, Al Lead Wire - 50 Sqmm with all lead and lift etc, as per specification and direction of Engineer in...
Stringing of ACSR Rabbit conductor with all lead and lift etc, as per specification and direction of Engineer in charge
Pole Concreting with CC 1:2:4 (without coping) 9 Mtr support (650x500x1700mm) with all lead and lift etc, as per specification and direction of Engineer in charge
Releasing and Re-stringing of loose pan of existing of existing conductor with all lead and lift etc, as per specification and direction of Engineer in charge
Strightning of slant/bent pole 9 Mtr Long with all lead and lift etc, as per specification and direction of Engineer in charge
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Line No 1.pdf
Tender Document • 1.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .