REPAIR/RENEWAL OF FURNITURE AGAINST BER FURNITURE FOR VARIOUS STN UNITS UNDER GE (A) BARODA

Amount

SCH 'A' PART-I (WOODEN FURNITURE)

Chair Easy (FD-229) All wood shall be of seasoned first class hard wood teak. Legs of chair shall be of 55mm x 25mm in section at place under side arms rest tapering to the bottom of legs to 25mm x 25mm in section. Front legs shall be joined by 50mm x 25mm in section rails provided below seat frame for the support of frame. Rear Legs shall be 55mm x 25mm in section below arms rest and 25mm x 25mm in section at the bottom of legs. Rear legs shall be joined together by rear rails of 50mm x 25mm in section provided at the bottom of seat frame. Seat frame shall have the rear horizontal out of section 70mm x 40mm joining the sides of frame which shall be 70mm x 40mm at the back and 25mm x 25mm in section near the front rail. The Front rail of seat frame shall be out of 55mm x 25mm in section teak wood. The seat frame shall be of size 510mm long in front and 480mm long at rear and 575mm deep. the top horizontal rail of back rest shall be out of 55mm x 40mm and shall be 50mm x 20mm. The bottom horizontal frame of back rest shall be 55mm x 20mm in section. The sides of back rest frame shall joint the seat of chair and shall be out of 70mm x 25mm made to shape as shown on drawing. the arm rests out of 65mm x 25mm in section and 610mm long shall be provided in shape as shown on drawing. Seat and back shall be woven with plastic cane of 2mm wide 0.4mm thick Shah or Premier brand in Godrej Pattern. Hard rubber rings / PVC toes shall be provided to bottom of the all legs with screws. All wood surface exposed to view when placed in position shall be French Polished with High Gloss finish.

Teapoy Wooden (FD-382) (i) All dimension shape and sizes shall be as shown in drawings and as specified. (ii) All wood work shall be of well seasoned 1st class Teak wood. (iii) Wherever, Particle board with lamination is shown in the drawing shall be provided with pre-laminated particle board. Top of Teapoy shall be of 18mm thick Pre-laminated particle board (one side teak finish shade and other side white balancing lamination) as specified here-in-before. Beading/Edging shall be 4mm thick half round of 1st class hard wood teak wood. (iv) All exposed surfaces of wood work shall be French polished to glossy finish. (v) PVC Shoes of suitable size, best locally available and as approved by GE shall be screwed/fixed to the bottom of each leg of Teapoy. (vi) All joints fixing shall be done in accordance with standard workmanship and specification. (vii) All other items, fittings and fixture shall be as shown on drawing.

SCH 'A' PART-II (STEEL FURNITURE)

Almirah Large Steel With Shelves (FD-1031) All as shown on drawing. Overall size shall be 920mm long, 485mm wide and 1985mm high base shall be made of 2 Nos mild steel channel based made in U Shape with ends covered.MS Sheet shall be 1mm thick. The base channel shell be welded 50mm from each end of the length of 920mm and shall be upto full width of 485mm and shall be 100 mm high, Tops, sides, back, bottom and front shall be 1 mm thick MS Sheet. Four shelves equally spaced of 1 mm thick MS sheet make five compartments. Handle:Superior quality mat finish stainless Steel handle of latest Godrej patten.Locking: Three way locking device, Godrej/Harrison. Paint: All exposed surfaces of steel shall be power coated in dark shade dual colour externally as approved. Internally in off white colour. Rest all as per drawing.

Almirah Med Steel (FD-1032) All as shown on drawing. Overall size shall be 760 mm long , 440 mm wide and 1270 mm high base shall be made of 2 Nos mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. MS Sheet shall be 1mm thick for channel base. The base channel shell be welded 50mm from each end of 760mm length and shall be up to full width of 450mm of almirah. Tops , sides, back, bottom and front shall be 1mm thick MS sheet. Three shelves equally spaced making four compartments shall be provide and shall be 1mm thick MS Sheet. Rest all as per drawing. Handle : Superior quality mat finish Stainless Steel handle of latest Godrej Pattern Locking : Three way locking device, odrej/Harrison Paint : All exposed surfaces of steel shall be powder coated In dark shade colour externally as approved. Internally in off white colour Rest all as per drawing

Chair CBA Steel With Arms (FD-75(M)) All as shown on drawing.Overall size shall be 535mm wide, 560mm deep and 900mm high.Seat shall be 455mm high from floor.Conduit pipe used for frame shall be 20mm dia steel tubing having wall thickness 1.6mm.Welding of frame where required shall be as directed by GE and in running welding grinded to give smooth surface.Wood for seat and back, where canning is to be done, shall be of first class hard wood teak. Wood for handles shall be of teak wood.Weaving on cane shall be done with primer or shah brand plastic cane in godrej pattern as shown on drawing.Cane shall be 2 mm wide and 0.4mm thick, gola type weighing not less than 6 gms per 10 running meter.Wood surface of seat,back and handle shall be painted with high gloss paint,black in tint, before canning, painting shall be done with spray machine after preparation of wooden surfaces.All iron surfaces exposed to direct view when placed in position shall be powder coated in dark color after making smooth surface.Bottom of legs shall have hard rubber shoes.Flat iron strips 20mm X 3mm, tow numbers in each seat and back, shall be welded to frame of chair as directed by GE. (Rest all as shown on drawings)

Chair CB Steel Without Arms (FD-75(M)) All as shown on drawing.Overall size shall be 485mm wide, 605mm deep and 885mm high.Seat shall be 455mm high from floor.Conduit pipe used for frame shall be 20mm dia steel tubing having wall thickness 1.6mm.Welding of frame where required shall be as directed by GE and in running welding grinded to give smooth surface.Wood for seat and back, where canning is to be done, shall be of first class hard wood teak. Wood for handles shall be of teak wood.Weaving on cane shall be done with primer or shah brand plastic cane in godrej pattern as shown on drawing.Cane shall be 2 mm wide and 0.4mm thick, gola type weighing not less than 6 gms per 10 running meter.Wood surface of seat,back and handle shall be painted with high gloss paint,black in tint, before canning, painting shall be done with spray machine after preparation of wooden surfaces.All iron surfaces exposed to direct view when placed in position shall be powder coated in dark color after making smooth surface.Bottom of legs shall have hard rubber shoes.Flat iron strips 20mm X 3mm, tow numbers in each seat and back, shall be welded to frame of chair as directed by GE. (Rest all as shown on drawings)

Charpoy IP Hard Top (FD/MAP-II/01) The overall size shall be as per drg. The frame work shall be made of CRCA box sections as under :- (i) Long rails - 25 X 65 mm box section of 16 gauge. (ii) Short rail - 25 X 65 mm box section of 16 gauge. (iii) Legs - 32 X 32 mm box section o 16 gauge. (iv) stiffeners for legs - 2 Nos., each of 25 x 25 mm box section of 16G thick. (v) Stiffener between long rails - 2 Nos., each of 16 G thick. Top shall be 12mm thick commercial gde BWR ply wood conforming to Is-303. MS plate of size 32 mm X 32 mm X 5 mm shall be welded under each leg and under the MS plate 3 mm thick rubber sheet shall be fixed with rubber based adhesive. Three No cleats of size 25mm X 60 mm X 6 mm shall be welded to each short rail to support the ply. All metal work shall be pretreated with epoxy polyster powder coating (Black) 70 microns by 7 tank process and oven dried with the following specifications: (i) Dry film thickness more than 45 microns (ii) Sit spray test to with stand more than 10:00 Hours (iii) Adhesion as per DIN 53152 standards. (iv) Pencil scratch hardness more than 2H. Rest all as specified as per drawings Irrespective of what is shown in drawing, 35mm X 5mm flat iron mild steel bend to right angle as directed shall be provided on four corners charpoy MNF set shall be of 19 mm square tube of wall thickness 1.6 mm & shall be provided in 'T' shape. The top horizontal length shall be of 900 mm.The vertical height shall be of 1480 mm joined in middle of horizontal by welding. The ends shall be plugged with 1.2mm thick mild steel sheet and welded as directed. Two key holes shall be provided in verticle of MNF set for fixing in head and foot boards. Two Nos 15mm X 3 mm and 80mm long flat iron of mild steel bend to shape shall be provided for holding when not in use.

Table Office Clerk Steel (FD-1004) All shown on drawing.Over all size shall be 1200 mm long, 610 mm wide and 760 mm high steel frame of size shall be of 1160mm long, 570mm wide and 742mm high. Four legs of 25mm MS Tube 25mm square MS tube with wall thickness of 1.6 mm for legs table top - 18 mm thick pre-laminated particle board of dark coffe shade for top with Hot pressed PVC beading all around the top. Sheet - 1.00 mm thick MS sheet. All exposed surfaces of steel shall be powder coated in dark/lite shade as approved. Rest all as shown and specified in drg.

Chair Writing (FD/E6/MAP/12) The Frame of the chair shall be of MS tubular frame powder coated, cantilever type of size 25mmX10mm in section.Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot presses plywood upholstered with superior quality fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.It shall be scratch and wheather resistant.Steel portion of chair shall be painted with two coats of synthetic enamel paint of black colour over a coat primer.Rest all specifications are as per drg and directed by Engr-in-Charge.

JAI TRADERS(INDIA) (BID ID -3392389)

Pratik Enterprise (BID ID -3392436)

shreekalyanwoodworks (BID ID -3389908)

M/s Makhan Lal (BID ID -3388720)