State Plan Scheme 2021-22 (Balance fund)- Additional work of construction of Thankamany Police Station building, Idukki

Amount

CIVIL WORKS

2.8.1: Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

OD11022/2023-2024: Site levelling by using JCB

4.1.8: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.2: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

60.7.1: DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

50.6.2.2: Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

5.2.2: Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.1: Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2: Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.6: Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.22.6: Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

13.4.1: 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.47.1: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

12.50: Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12.51.1: Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)

10.16.1: Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

10.25.2: Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

16.91.1: Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

WATER SUPPLY & SANITARY WORKS

50.18.8.4.1: Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2

18.62.4: Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P / H.P.H.D plastic ball.40 mm nominal bore, 206 mm long, weighing not less than 690 gms

18.48: Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

50.18.8.5.1: Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. concealed work, including cutting chases and making good the wall etc. 40 mm pipe 10 kgf/ cm2

ELECTRICAL WORKS

1.10.1: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.17.3: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.21.1: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.31: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

1.32: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

1.53.1: Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

1.38: Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

90.4.5.4: Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

90.12.5.12: Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3 core 4 sq mm

2.3.4: Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door

5.4: Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

OD5314/2023-2024: labor for wireman

OD5315/2023-2024:Supply and Fixing 3 W LED slim panel light fitting make Luker(LNPR03)/ Philips or equivalant govt approved brand including connection etc as complete

OD5316/2023-2024: Supply and fixing of 20W 4feet led tube light . LUKER or equivalent make,giving connections etc complete as required.

OD5317/2023-2024: Supply and fixing of 6W 12V led strip 5mtr indoor light model-LS2835 with 3A driver LUKER or equivalent make,giving connections etc complete as required

OD5318/2023-2024: Supply and Fixing of 12 W LED slim panel light fitting make Luker(LNPS12)/Philips or equivalant govt approved brand including connection etc as required.

OD9853/2023-2024: Supply and fixing of 10W LED surface panel light IP 65 ECO protection. modelLCL10R LUKER or equivalent make,giving connections etc complete as required.

OD9854/2023-2024: Supply and fixing of pluggable type surge arrester ( for single phase UPS DB)in suitable enclosure Class B+C/ Class 1+2 as per IEC 61643-11 (IP 20) with potential free contact, thermal dis connector & provision for inbuilt for defective arresters between Line - Neutral and Neutral – Earth, one number arrester Spark Gap type to connect between Neutral and Earth of following ratings including base element & pluggable arresters. Nominal voltage - 230V 50Hz, type single MOV with built in thermal fuse and cooling gel(L to N) & spark gap encapsulated / non exhausting (N to E) . Lightning Impulse Current – 7 kA (10/350µ sec) for Line to Neutral & 25 kA(10/350µ sec) for Neutral to Earth,Nominal discharge current-30 kA (8/20µ sec) for Line to Neutral & 50 kA(8/20µ sec) for Neutral to Earth, max discharge current 50 kA (8/20µ sec) for Line to Neutral & 100 kA(8/20µ sec) for Neutral to Earth. Voltage protection level 1500V (L to N) & 1500V (N to E).TOV withstand capacity of 438 V. Operating temp -40º to +80ºC. Response time <25 nano sec (L to N), < 100 nano sec (N to E) DIN rail mounting type etccomplete with back up fuse as required and as directed.

OD9855/2023-2024: Supply,installation,testing and commisioning of following port switch (10/100/1000 mbps) 24 Port GIGABIT Desktop Switch D-Link/ TP-Link approved make,giving connections etc. complete as required.

OD9856/2023-2024: Supply ,installation ,testing and commissioing D-Link CAT6 24 port patchpanel Loaded.make -D-Link or equivalent

OD9857/2023-2024: Supply ,installation ,testing and commissioing of Netrack 6U rack with shelf-1,6socket /5A pdu-1, 20 hardware screws and closed type cable manager 1.makeNetrack/valrack/equivalent

OD9858/2023-2024:Supplying and fixing suitable size pvc box with modular plate and cover in front onsurface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).

OD9859/2023-2024: supply and fixing of 6x4 ip protected whether proof metal junction box .make syntex or equivalent make,giving connections etc complete as required.

OD9860/2023-2024: Supply and fixing of 10W outdoor led gate light . model-LGLSMD LUKER or equivalent make,giving connections etc complete as required.

OD9861/2023-2024: Supply and fixing of 8 inch PVC Exhaust fan including all accessories, working on 230 V A/C. make Havells or equivalent

OD9862/2023-2024: Supply and fixing of 6w ceiling speaker (CS-5061T)make-Ahuja or equivalent

OD9863/2023-2024: Supply installation testing and commissioning of 12W led slim surface type with 1200 Lumens ,50000 burning hours,all accessories ,electrical connections.including fixing materials required. Make philips/wipro/havells or equivalent

OD9864/2023-2024: Supply and installation of 8 mm Aluminum Round Conductor complete as specified in drawing & Meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305) OBO Type No. RD 8/ALU or equivalent

OD9865/2023-2024: Supply and installation of Roof conductor holder - Stainless steel Conductor holder:With Bottom section and conductor holder stainless steel (V2A)Bottom section with Ø 8.5 mm slot. Conductor holder @ 1 meter distance.OBO Type No. 159 VA-V (5217 07 5 ) or equivalent

OD9866/2023-2024: Supply and installation of flat conductor holder suitable for FL 30. Installed with 2 Cylinder bolts. OBO Type No. 166 LS 70 (5226570) or equivalent

OD9867/2023-2024: supply ,testing and fixing of skirting light 3module (make -legrand or equivalent)

OD9868/2023-2024: Supply and fixing of CAT6 I/O socket in the existing suitable modular plate and suitable gi box ,giving proper connection as required.

OD9869/2023-2024: Supply and fixing of CAT6 patch cord 1 mtr. make- dlink or equivalent

OD9870/2023-2024: Supply and fixing of CAT6 patch cord 2 mtr. make- dlink or equivalent

OD9871/2023-2024: Supply and laying 1.5 Sqmm speaker cable 2core make-finolex or equivalent

OD9872/2023-2024: Supply and fixing projector ceiling mounting kit 1.5 feet to 1.5 feet ,hight adjustable

OD9873/2023-2024: Supply and fixing of 6w WH outdoor wall light LODARCD-6D or equivalent 3000K.including all accessories as required for complete installation (wipro/luker/equivalent)

OD9874/2023-2024: Supply and fixing of 11W led helion mirror light . model-LMR9 LUKER or equivalent make,giving connections etc complete as required.

OD9875/2023-2024: Supply and fixing of 3w WH outdoor wall light LODARCS-3D 3000K .including all accessories as required for complete installation (wipro/luker/equivalent)

OD9876/2023-2024: supply testing and fixing of 6w fancy light with led bulb including connection etc. as required (make -luker ,wipro or equivalent)

OD9877/2023-2024: Supply and fixing of Alumiium profile concealed or surface mound type 3mtr aluminium finish.model -LPL2514 or LPL2015 and 12W 12V led profile strip 3mtr with profile sleek drive LUKER or equivalent make,giving connections and including all accessories like clamp,clip,connector and end connectors etc complete as required.

OD9878/2023-2024: Supply and installation of 1200mm sweep high speed decorative ceiling fan complete with service value minimum 4.0, Air delivery minimum 210, down rod , 2 number canopies, shackle kit, Copper winding, 3 number blades and all remaining accessories including safety pin, nut bolts, washers suitable for 230V/240V single phase AC supply. make -havells(milor) or equivalent

OD9879/2023-2024: Supply and fixing of 12W led die cast aluminium housing bulk head IP65 with 1000 Lumens all accessories ,electrical connections.including fixing materials required. make-philips/wipro/havells/luker(LBKOVSL04) or equivalent

OD9880/2023-2024: Supply and fixing of 1feet 5W led batten with 1000 Lumens ,25000 burning hours,all accessories ,electrical connections.including fixing materials required. makephilips/wipro/havells or equivalent

OD9881/2023-2024: Supply and fixing of pluggable type surge arrester in suitable enclosure Class B / Type 1 as per IEC 61643 -11 for lightning current equipotential bonding to VDE 0185-305 (IEC 62305). The device with visual status LED indication and inbuilt common remote indication for defective arresters 3 nos of encapsulated, nonextinguishing spark gap to connect between Line and Neutral and one number arrester encapsulated, non-extinguishing spark gap type to connect between Neutral and Earth of following ratings including base element & pluggable arresters. Nominal voltage -230V 50Hz, Total Lightning Impulse Current - 150 kA (10/350µ sec) for Line to Neutral & 125 kA(10/350µ sec) for Neutral to Earth, Total Nominal discharge current- 150 kA (8/20µ sec) for Line to Neutral & 125 kA(8/20µ sec) for Neutral to Earth, Voltage protection level 1700V (L to N) & 1500V (N to E). Operating temp -40º to +85ºC. Response time < 100 nano sec with Short-circuit resistance should be 10 kA. DIN rail mounting type etc complete with back up fuse as required and as directed.

OD9882/2023-2024: Supply installation testing and commissioning of 35 W LED pressure die cast Aluminium housing LED top light fitting (IP 66 Protection ) with lamp (Govt approved and reputed brands like wipro or Philips )on 40 mm or nearest suitable size B class GI pipe 1M long cut and weld,bend to shape fixed on wall using flat iron clamps giving connection with required painting the GI pipe and clamps with all necessary items making good the surface as required

OD9884/2023-2024: Supply and fixing of 3W led surface mount light with all accessories ,electrical connections.including fixing materials required. make-philips/wipro/havells/luker (LNPSRR03) or equivalent

OD9886/2023-2024: Supply installation testing and commissioning of 2feet 10W led batten with 1000 Lumens ,25000 burning hours,all accessories ,electrical connections.including fixing materials required. make-philips/wipro/havells or equivalent

OD9887/2023-2024: Supply and fixing of 7W led focus light . Luker (LSP07) or wipro or equivalent make,giving connections etc complete as required.

OD9888/2023-2024: Supply installation testing and commissioning of 6W led slim surface type with 1200 Lumens ,50000 burning hours,all accessories ,electrical connections.including fixing materials required. make-philips/wipro/havells or equivalent

OD9889/2023-2024: Supply and fixing 9 W LED Bulb make philips/Govt approved reputed brand .

OD11023/2023-2024: Supply and fixing of 0,5hp submersible motor (VOSKH16) with starter and all accessories for giving proper connections etc complete as required.

ANISH SEBASTIAN

Bidder Name

SHINE T JOSEPH (ABEL CONSTRUCTIONS)

ANISH SEBASTIAN