Drilling of bore with Installing submersible pump set with alternator other accessories at Aanganwadi -2 at Village Diwantembrun Ta.Ahwa Dist.Dang. (2nd Trial)

Name of work: Drilling of bore with Installing submersible pump set with alternator other

accessories at Aanganwadi -2 at Village Diwan Tembrun Ta.Ahwa Dist.Dang

Memorandum showing items of works to be carried out

It. No. Quantities Item of work Estimated Unit Total

estimated but Rates Amount

1 180.00 Rmt Drilling of 215mm dia. Bore in over burden 271.00 Rmt

strata (0-30) including lowering and fixing of

175 mm nominal dia UPVC pipe/175 mm dia

ERW pipe upto required depth and further

drilling of 165mm dia bore hole in rocky strata

by DTH rig.. a) For Ta. Ahwa, Subir & Waghai

2 19.70 Rmt Manufacture, supply & delivery of ISI marked 906.00 Rmt

UPVC Casing pipe (IS 12818 with latest

amendment. (Rates are exclusive of GST) (c)

175.00 mm nominal dia. " CS " Type

3 1.00 No. Providing boreplug having 100mm height made 654.96 No.

from M.S. plate with 3 holes at equivalent

distance on circumference for nut-bolt type

locking arrangements with nut bolts suitable for

4 2.00 Hrs. Development of above mentioned bore by air 2719.00 Hrs.

compressor 400 CFM/100PSI

5 1.00 No. Providing & Supplying Single phase submersible 16022.00 No.

pump motor set with control panel having

undervoltage, overvoltage and dry run

protection, Cat Q:1.5 20 LPM/180 mtr. 3 HP as

per detailed technical specification (Pumps

should generally confirm to IS : 8034 and motors

should confirm to IS:9283 revised) MOC:

Casing: CI-FG260, Impeller : Bronze & Shaft :

6 1.00 No. Electrical wiring & fitting charges of elctric 2500.00 No.

meter , 32 Amp fuse, control panel etc. including

errection of the above items on wooden board,

cost of material and all liasioning work for

getting electric connection from concerned Vij

7 188.00 Rmt Supply of Flat PVC cable wire for submercible 87.00 Rmt

Pump Set 1 R x 3 C x 4 mm2

8 188.00 Rmt Providing and supplying in standard length ISI 81.00 Rmt

mark high density Polyethylene H.D.P.E. Pipes

suitable for potable water as per IS specification

no. 4984/1995 including all local and central

taxes, transportation, freight charges,

octroi,inspection charges, loading, unloading,

conveyance to the dept. stores etc. comp.

1) 50 mm dia. HDPE -10 Kg/cm2

9 1.00 Per Clamp made from M.S. plate with 3 holes on 560.70 Per

Pair either side with nuts & bolts of Std. Make.450 Pair

mm X 65 mm X 10 mm flat suitable to 50 mm

10 1.00 No. Providing and fixing in position sign board of 3011.30 No.

standard size 1.20m x 0.90 m with M.S. angle

40mm x 40mm x 6mm with 3 mm thick iron

plate in 1 : 5 : 10 prpotion concrete block size

40cm x 40cm x 75cm inncluding painting

existing data on the board etc. complete as

11 1.00 No. Geophysical & geohydrological ground water 14286.00 No.

investigation for finalisation of one pin point

including vehicle charges

12 1.00 No. Providing and fitting readymade prefabricated 12187.50 No.

portable chemicalized ferroconcrete mini panel

having outer size 110 x 50 x 190 cm with

necessary fitting for electic panel mounting

complete as per detailed specification and

Rs. One Lack Fifty Two Thousand Eight Hundred Seventy Two and Paise Sixty Six Only.

I/We am/are willing to carry out the work at ________________ % above/below ( percent should

be written in figures and in words ) of the estimated rates mentioned above. Amount of my/our tender works out

*Estimated amount *Estimated amount

put to tender Rs. _____________ put to tender Rs. _______________

Deduct ____ % below Rs. _________ Add ____ % above Rs. _________

Net Rs. _________ Total Rs. _________

*( Please strike out which ever is not applicable )

Note 1:- The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

Note 2 :- The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills

ExecutiveEngineer

Signature of Bidder Water Supply PIU/PMU Division