ADDITION/ALTERATION TO BLDG NO P 117 AND REFURBISHMENT OF BLDG NO P 108 IN TECH B AREA AND PROVN OF STORAGE SPACE IN BLDG N. P 39 OF TECH B AREA AT IRDE UNDER GE(I) RND DEHRADUN

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out Hard/dense soil complete all as specified & directed.

Excavating in trenches, in any type soil not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified & directed.

S & F Roof trusses (framed) , trussed , purline, cross gantries and fastening and heavy brackets framing (Beam, tee, angle,channel or flat section ) including distance pieces complete all as specified & directed.

Dismantling Asbestos cement (corrugated, semicorrugated,etc) sheets in roof coverings complete all as specified & directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding of wall, fixed with self tapping screws complete all as specified & directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primering coat complete all as specified & directed.

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with uilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder oated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and ecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified & directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on is account shall be made.

M&L for 40 mm thick flush shutters, solid core construction, exterior grade with block board core and plywood face, pannels, commercial type on both sides and one face is covered withdecorative face veneer with lipping / frame to match, including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150 mm size complete all as specified and directed.

S&F floor door stopper double leg of aluminium alloy body of 140 mm length with aluminium base plate of size 50 mm x 40 mm complete all as specified & directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

S&F for framed work as in door and gates of angle or other sections and similar items confirming to FE-290 (Gde E-165) complete all as specified & directed.

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B-1, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick complete all as specified and directed.

S & F Glazing with 4.8 mm thick frosted/tinted sheet glass exc 0.50 sqm in each panel fixed to UPVC/Aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing beading to frame complete all as specified & directed.

M&L for framed work such as grills , gratings etc, with ends of bars shouldered and or riveted or forged in to spikes and similar work conforming to Fe290 Gde -E-165,fixed in position complete all as specified & directed.

Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

M&L for suspended false ceiling system using chicago metallic (E grid)exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified & directed.

Taking down mud plaster on brick or stone walls, etc including racking out joints, hacking for key scrubbing down with water etc complete all as specifed and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only under respective item of sch A.

M & L rendering 15 mm thick on brick wall or concrete surface cement mortar 1:6 finished fair and even complete all as specified and as directed.

M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied and 0.90 litre/10sqm over new surfaces external surfaces of wall complete all as specified and directed.

M & L for applying two coats of Distemper oil emulsion, white or tinted on new wall surface over a coat of 3 mm thick wall care putty including preparation of surface complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed

M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as specified and directed.

M&L RCC type B-01:2:4 (12.5mm graded stone aggt) for slabs supports on walls complete all as specified & directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Demolition of Cement concrete ( un-reinforced ) of any description and in any position not otherwise specifically provided for complete all as specified & directed.

M&L for cement concrete 1:4:8 Type D-2 using 40 mm graded crushed stone aggregate in foundation filling sub base and mass concrete complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified & directed.

ditto as per item no.34 for kota stone slab 20-25mm thick in riser of steps,skirting, dado and pillar laid over cement screed and jointed all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, copings, holdfast and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

S&F in 18 ti 19 thick solid factory made pvc board Any colour (Approved by GE) for cupboard/cabinet shutters with on or both side laminated printed celluka board, anti termite and anti moisture proof etc, sheet fixed with & including suitable pvc frame and magnetic door catcher as per specifications & drawing complete all as specified and directed.

S&F 125 mm long hasp & staple safty type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed.

S&F brass handles, cast type, polished bright 100 mm size complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

S&F powder coated aluminium sliding window two track with two glass shutters aluminium powder coated section aluminium cleat, PVC track, bearing, handle locking arangement, rubber beading etc complte fittings as approved. Note Size of aluminium section shall be under :- (i) Two track top and vertical - Jindal main-2010 section No 20829 or equivalent (ii) Two track bottom- Jindal main-2010 section No 20830 or equivalent (iii) Shutter vertical section- Jindal main- 2010 Section 20606 or equivalent (iv) Shutter top and bottom - Jindal Main-2010 Section 20604 or equivalent (v) Shutter vertical middle (interlock) -Jindal Main-2010 section 20605 or equivalent.

M&L for taking out drapery rod and supply and fixing polyester coloured venetian blind mounted qn doors windows with aluminium hanging channel with sliding wheel rope including all necessary fittings andfixture complete all as specified & directed.

S&F Powder Coated aluminium window and ventilator shutters side hung type without sash bars, , aluminium section weighing 0.55kg/m including necessary jointing cleats/ glazing clips, rubber neoprene packing, anodised aluminium snap beading , screws, anodised aluminium fittings such as peg stay 150mm long (1 No) hinges type B-21 100mm long ((2 Nos) suitable handle (1 No) complete all as specified and directed.

S&F Powder Coated aluminium frame for doors, windows or partition including aluminium beading, hinges of required size,jointing cleats, screws, dash, fastners,plug for fixing with wall, columns etc complete all as specified & directed.

S&F in aluminium (die cast) body door closer hydraulically regulated, designation No.3 universal type, suitable for doors shutters up to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete allas specified and directed.

S&F Powder Coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary jointing cleats/ glazing clips, rubber neoprene packing, handles 2 Nos in each door , locking arrangment, aluminium snap beading screw etc, complete all as specified and directed. ( minimum thickness of powder cated should be 50 micron)

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified & directed.

M&L for non-skid coloured ceramic tiles first quality (of approved class, colour and design/shade) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified & directed

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of size 350x250x7mm/450x350x7 mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for vitrified coloured tiles 10 mm thick light shade (square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed.

M&L for vitrified coloured tiles 10 mm thick dark shade (square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified & directed

M&L for 75 mm thick for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in subbase for laying floor finishes complete all as specified and directed.

Supply only liquid integral water proofing compound ISI marked complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling, cornices etc by brooming down or steel wire brushing down scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coats of oil bound distemper complete all as specified and directed.

S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repair soap dish brass, chromium plated, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair bib taps brass fancy type, brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair fancy type angular stop cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified & directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.

S&F PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and directed.

S&F in repairs PVC waste pipe flexible type 32mm dia suitable for coupling 32mm,610mm long for WHB/Sink complete all as specified & directed.

S & F tubular towel rail 20mm dia 600mm long of brass chromimum plated complete all as specified and directed.

Disconnecting & taking down existing water tank of capacity exc 500 liter and not exc. 1000 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 1000 lts capacity (cylindrical vertical with closed top) hoisted with and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified & directed.

Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed.

Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed.

S&F for laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F for laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for 75mm thick PCC (Cement concrete) 1:3:6 typeC-2 using 40mm graded stone aggregate as in plinth protection finished even and fair and making 50mm deep joints at every 3 metre interval and at every corner and filling the joints with bitumen of grade 85/25 and sand mixture 1:3 complete all as specified and directed.

Shifting carefully from inside to outside of bldg Taking down of carefully unserviceable Electrical eqpt such as changeover, GI pipe etc and submitting to the store for keeping in safe custody and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Taking down of carefully unserviceable Aluminium/copper point wiring (light, fan socket or power) complete with fitting such as switches, ceiling rose lamp holder, sockets, fan regulators, SK/FTL light fittings etc removing materials for store for keeping in safe custody or for taking credit (credit for above items should be taken as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch complete all as specified and directed.

All as per Srl item No 76 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on same board complete all as specified and directed.

All as per Srl item No 76 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.

All as per item No 76 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete all as specified and directed. Make of cable and conduit: Havells/Gemscab/RR cable.

S&F Modular switch piano single pole one way 6 amp complete all as specified and directed. Make -Legrand / Anchor Penta / Havells as approved.

S&F Modular switch piano single pole one way 16 amp complete. Make - Legrand / Anchor Penta / Havells as approved.

S&F Modular socket outlet 2/3 pin combined 2 module 6/16 amp complete all as specified and directed. Make -Legrand / Anchor Penta / Havells as approved.

S&F Modular socket outlet 2/3 pin combined 2 module 6 amp complete all as specified and directed. Make -Legrand / Anchor Penta / Havells as approved.

Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply & fixing of ceiling rose, surface bakelite, 65x50mm, three terminals 240 volt complete all as specified and directed. Make : Anchor/SSK/Cona.

Supply & fixing of High efficacy 2'x2' recess LED flat panel with high brightness LED for glare free homogenous illumination with 36W LED 5700K Lamp all as specified. Make:- Bajaj/crompton or equivalent.

Supply & fixing in replacement of LED building light 1X35 Watt,pressure die cast aluminium housing,heat resistance toughened glass with frame and IP 66 protection for better optics for uniform distribution and connection with three core copper flexiable cable 16/0.20 mm from ceiling rose to fitting complete all as specified and directed. Make. Bajaj, crompton or equivalent.

Supply & fixing in replacement of 8 way SPN DB double door type Suitable for surface and flush mounting. IP 43 with metal doorcomplete all as specified and as directed. Make : Havells/ABB/Legrand/ C&S.

Supply & fixing in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as directed.

Supply & fixing in replacement of MCBs, SP 6 to 32 Amps C characteristics of 10 kA breaking capacity, including all incoming and out going electric connection. complete all as specified and as directed. Make :- ABB/Havells / Legrand.

Supply & fixing in replacement of MCBs, SPN 40 Amps C characteristics of 10 kA breaking capacity, including all incoming and out going electric connection. complete all as specified and as directed. Make:- ABB /Havells/ Legrand

M&L sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 25 mm dia with standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor wall/ ceiling/concealed surface etc complete all as specified and directed.Make of cable : Finolex / Havells/ Polycab as approved by GE & Make of PVC conduit & fittings : AKG / Asian /Jindal as approved by GE.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply & fixing of High efficacy 1'X1' surface mounted LED flat panel with high brightness LED for glare free homogenous illumination with 18W LED complete all as specified and directed. Make:- Bajaj/crompton or equivalent

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supplly & fixing LED Lights 20 watts, 4 feet long energy savings surface mounted luminarie with high efficiency PMMA diffuser gives soft glare free light. complete all as specified and directed. Make :Crompton cat part No. LTT8-20/ Havells/Bajaj.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. Make : Havells/ Bajaj or equivalent

Supply & fixing in replacement of 12 way SPN DB double door type Suitable for surface and flush mounting. IP 43 with metal door complete all as specified and as directed. Make : Havells/ABB/Legrand/ C&S.

Supply & fixing three pole and neutral enclosure earth plug and socket complete of IP : 30 protection with 32 Amp TPNcomplete all as specified and directed. Make : Indoasian/ Legrand/ C&S or equivalent

Supply & fixing in replacement of MCBs, TPN 40 Amps C characteristics of 10 kA breaking capacity, including all incoming and out going electric connection. complete all as specified and as directed. Make:- ABB /Havells/ Legrand

M/S PUNDIR BUILDERS

M/S WASEEM KHAN CONTRACTOR

M/S P K ARORA

M/S DHYANI CONSTRUCTION CO.

Amit Associates

ANEJA AND COMPANY

M/S Anil kumar

Sharda Enterprises