CONSTRUCTION OF NEW ANGANWADI BUILDINGS IN KATHOR VILLAGE AT (1) TANKI FALIYU, KATHOR VILLAGE-2, (2) HALPATIVAS, KATHOR VILLAGE-3, (3) MUSLIM FALIYU (PADAR FALIYU), KATHOR VILLAGE-6, (4) NAHER COLONY, KATHOR VILLAGE-8 IN NEW EAST (SARTHANA), SUART. (II- ATTEMPT)

NAME OF WORK : CONSTRUCTION OF NEW ANGANWADI BUILDINGS IN KATHOR VILLAGE AT (1) TANKI FALIYU,

KATHOR VILLAGE-2, (2) HALPATIVAS, KATHOR VILLAGE-3, (3) MUSLIM FALIYU(PADAR FALIYU), KATHOR

VILLAGE-6, (4) NAHER COLONY, KATHOR VILLAGE-8 IN NEW EAST (SARTHANA) ZONE, SURAT. (II ATTEMPT)

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

WORK UPTO PLINTH

Excavation for foundation includ.sorting out & stacking of useful

1 materials & disposing of the excavated stuff upto 50 mt. Lead &

all lift, watering etc.Comp.

(A) Loose or Soft soil Executed With Mechanised Efforts /

SMC SOR-PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

2 disposal ofthe surplus excavated soil as directed within a lead of

50 M. For following diameter of piles.

250mm dia 0.00 Rmt 334.80

SMC SOR ITEM NO. 94, PG.NO.

Providing and filling rubbles including hand packing and filling

3 interstices with quarry spalls behind abutments and between

returns as directed.

SMC SOR , ITEM NO. 22, PG. NO. 3 26.48 C.M. 1094.11

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

4 stone agg 20m.m Nominal size)&curing comp. excl. cost of form

work in :(a) foundation & Plinth

(A) Foundation 14.00 C.M. 3095.25

(C) Grade Slab 1.50 C.M. 3095.25

SMC SOR, PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4

graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete

(C) Grade slab 12.70 C.M. 3741.69

SMC SOR, PAGE NO 09 IT NO

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

6 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of

(A) foundation, footing, base of columns and mass concrete 14.60 C.M. 4332.50

SMC SOR, PAGE NO 14 DESIGN MIX M25

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

7 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12930.68

(2) Having cross sectional area more than 0.085 sq. mt .up to

(3) Having cross sectional area more than 0.12 sq. mt. 9.60 C.M. 9288.03

SMC SOR, PAGE NO 14 DESIGN MIX M20

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 9083.57

(2) Having cros sectional area more than 0.08 sq. mt and upto

(3) Having cross sectional area more than 0.12 sq. mt . 0.00 C.M. 7067.84

SMC SOR, PAGE NO 14 DESIGN MIX M25

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C.

8 work incl. bending, binding & placing in position etc.comp.---

Upto G.L./P.L. 5604.00 Kg. 77.29

SMC SOR, PAGE NO 1 IT NO

Brick work using common burnt clay building bricks having crushing

9 strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement :

6 -fine sand) (C) Fly Ash Bricks

SMC SOR, PAGE NO 2 IT NO 16 20.30 C.M. 4729.83

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

SMC SOR, PAGE NO 1 IT NO 10 523.40 C.M. 136.92

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

Filling in foundation and plinth with murrum or selected soil in

11 layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

SMC SOR, PAGE NO 1 IT NO 11 61.70 C.M. 301.78

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with ISI specification. Using Chlordene and

Chiorpurfiles 20 EC. As per 6131_paret-II Consentration Weight one percent

12 is recommended i.e. one litre 20 EC chemical emulsion with 19 liter give 1%

concrentration inclusive of one litre chemical emulsion appication at the rate

of 5 litre chemical / Sqm of surface is recommended as per IS.

SMC SOR, PAGE NO 12 IT NO

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar

surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of C.M.

1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement:

13 sand) apply thick cement slurry and apply roller horizontal as well as vartical

( two times ) up to good quality and size of grain in elevation as per directed

by engineer incharge.

SMC SOR, PAGE NO 3 IT NO 28 MR 46.80 S.M 324.00

Providing & applying two coats of weather shield max paint (3 coats may

be required in case of darker colours.) of ICI Dulux or Apex Ultima of Asian

Paint including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and

manufacturers. Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be

14 achieved by brushing with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes. Priming: Apply a liberal coat of exterior

acrylic primer and allow it to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required between each coat of

weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 MR 46.80 S.M 82.00

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

15 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12930.68

First Floor 0.00 C.M. 12971.23

Terrace Floor 0.00 C.M. 13011.78

(2) Having cross sectional area more than 0.085 sq. mt .up to

Ground Floor 1.20 C.M. 11253.32

Terrace Floor 0.22 C.M. 11293.87

At Staircabin Top 0.00 C.M. 11334.42

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 9.40 C.M. 9288.03

Terrace Floor 1.80 C.M. 9328.58

At Staircabin Top 0.00 C.M. 9369.13

(SOR SMC Pg No. 14 Design Mix M25)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.40 C.M. 9083.57

Terrace Floor 0.00 C.M. 9124.12

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 0.00 C.M. 8155.37

Terrace Floor 0.00 C.M. 8195.92

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 11.50 C.M. 7067.94

Terrace Floor 0.00 C.M. 7108.49

(SOR SMC Pg No. 14 Design Mix M25)

(2) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7965.38

Terrace Floor 0.00 C.M. 8005.93

(3) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7377.92

Terrace Floor 0.00 C.M. 7418.47

(4) Having more than 13 cm. Thickness

Ground Floor 17.30 C.M. 6793.97

Terrace Floor 0.00 C.M. 6834.52

(SOR SMC Pg No. 14 Design Mix M25)

Ground Floor 1.50 C.M. 9963.33

Terrace Floor 0.00 C.M. 10003.88

(SOR SMC Pg No. 14 Design Mix M25)

Ground Floor 1.40 C.M. 7119.46

Terrace Floor 0.00 C.M. 7160.01

(SOR SMC Pg No. 14 Design Mix M25)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed

16 stone agg. 20 m.m Nominal size)& curing comp. incl. cost of from

work in: wall caps/ copings.

(SOR SMC Pg No. 9 It No. 97) 4.60 C.M. 4085.83

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

17 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of

(F) Stair cases including landing etc.

Ground Floor 0.00 C.M. 7765.80

First Floor 0.00 C.M. 7806.35

(G) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9483.21

Terrace Floor 0.00 C.M. 9523.76

(SOR SMC Pg No. 14 Design Mix M25)

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

18 R.C.C. work incl. bending, binding & placing in position etc.comp.--

Ground Floor 5895.50 Kg 77.29

Terrace Floor 818.50 Kg 78.34

Stair Cabin Top 0.00 Kg 79.39

(SOR SMC Pg No. 2 It No. 15)

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

Brick work using common burnt clay building bricks having

19 crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar

1:6 (1- Cement : 6 -fine sand) (C) Fly Ash Bricks

Ground Floor 63.40 C.M. 4729.83

Terrace Floor 16.70 C.M. 5018.55

(SOR SMC Pg No. 2 It No. 16)

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in Cement

mortar 1:4 (1- Cement : 4 - coarse sand ) in foundation and plinth

(C)Fly Ash Bricks

Ground Floor 62.60 S.M. 712.81

Terrace Floor 0.00 S.M. 719.37

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 15mm.th.cement plaster in single coat

on brick/ concrete walls similar surfaces for plastering &

finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and similar

Ground Floor 418.80 S.M 249.39

Terrace Floor 0.00 S.M 278.94

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat

on brick/ concrete walls similar surfaces for plastering &

finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and

similar surfaces

(B) for ceilings and soffits of stairs

Ground Floor 110.70 S.M 225.34

Terrace Floor 0.00 S.M 254.89

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality chicken

wire mesh (FRP / PVC)at junction of brick work and RCC

work or two dissimilar surfaces, at all heights fixed by nails,

rowal plugs or tag by cement mortar 1:3 before applying the

plaster, including curing, scaffolding all complete as directed.

Ground floor 26.70 S.M. 102.00

Terrace Floor 0.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124) MR

Providing & Applying 20mm. Th. Heavy Roller plaster on walls

or similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th.

24 Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply thick cement

slurry and apply roller horizontal as well as vartical ( two times )

up to good quality and size of grain in elevation as per directed

by engineer incharge.

Ground Floor 344.70 S.M 324.00

Terrace Floor 149.80 S.M 324.00

(SOR SMC Pg No. 3 It No. 28) MR

Providing throating or plaster drip and moulding it to R.C.C.

chajja etc. comp.. For all floor

Ground Floor 29.60 R.M 43.74

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line and

level etc. Comp. For all Floor (M.R.)

Ground Floor 29.60 R.M 50.00

Terrace Floor 0.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing

with flush pointing in white cement.

Ground Floor 0.00 S.M 1092.37

Terrace Floor 0.00 S.M 1092.37

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

Ground Floor 89.20 S.M 1135.80

Terrace Floor 0.00 S.M 1135.80

(SOR SMC Pg No.4 It No. 45)

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

29 sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with colour cement slurry including finished with flush pointing

& cleaning the surface etc. comp.Size 24" x 24" For Antiskid

Ground Floor 7.00 S.M 1467.72

Terrace Floor 0.00 S.M 1467.72

(SOR SMC Pg No.4 It No. 43)

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid

over and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc.

complete. (A) 25mm thick

Ground Floor 116.70 S.M 1019.39

(SOR SMC Pg No.3 It No. 32)

Providing and laying polished kota stone slab 25mm thick in

risers of steps,skirting Dedo and pillars laid on 10mm thick

31 cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with

gray cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Ground Floor 30.50 S.M 1130.79

Terrace Floor 0.00 S.M 1130.79

(SOR SMC Pg No.4 It No. 33)

Providing and constructing sandwitch type Granite stone

cooking platform 0.6 mt. wide & 0.75 mt. height, including

one end side granite stone (Double Polish) of 1.25 mt. height

& front granite stone patti of 10 cm wide, vertical partitions

of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with

32 finishing smooth with cement slurry as required and Stainless

Steel sink of 0.45 mt x 0.45 mt size of approved quality and

make with required all fitings & fixitures etc. comp as per

instruction given by site in charge at all floors. (Basic rate of

Granite Rs.1,200.00 / S.M.)

Ground Floor 11.00 R.M. 3128.00

Terrace Floor 0.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and W.C. At all floor

levels, after completing plumbing work of pans, pipes,traps

33 etc.with cinder or fly ash as directed by Engineer in charge etc.

All Floor 3.30 C.M 500.00

(SMC SOR,Pg No.6, It No. 61)

Providing & fixing 35mm.th. Indian teak wood shutters for doors,

windows & clearstory windows incl. Indian teak wood frames of

34 finished size 12cm x 7cm.incl. anodized aluminum fixtures &

fastenings incl. Primer coat of approved quality & two coats of oil

painting etc. For all Floor

(A) Fully Panelled 12.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick

FRP shutter with wood grain raised panneled design finish shutter

having extra reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected polyurethene

foam done in situ along with embedded wooden pieces for stiffening &

also taking hinges & fixtures. The whole FRP frame & shutter is to

be water proof weather proof,termite proof &resistance to mild

acid/alkali. Rates are to be inclusive of S.S.hinges with fastener sleeve

& alluminium fixtures & fastentings.

(A)'Same as Above But Without Frame 11.40 S.M 2019.98

(SMC SOR,Pg No.5, It No. 55)

Providing & fixing 35mm.th. Flush Door Solid Double Core type

Both Face water proof Ply Vennered & 1.5 mm th.laminate shall be

pasted on both side with adhesives as specified by the manufacturers.

36 The laminate shall be as per approved shade & texture, of make incl.

Sal wood frames of finished size 12cm x 7cm.incl. S.S. Hinges with

nessary screws & Anodized aluminum fixtures & fastenings For all

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 6.80 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt)

with sliding shutters of horizontal member size 40 mm x18 mm x

37 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical member

of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947, @ Wt. of

0.456 Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick

tranparent bronze colour tineted float glass with powder coated

aluminium fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc. complete for window.

(A) Same as above but colour anodized 0.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A)

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 95 mm x 24 mm x 1.17 mm

(of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal

Three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal

section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size 92 mm

x 31.75 mm x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40 mm x 18 mm x

mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical member

of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8949 @ wt. of

0.456 kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminium fittings & fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

(A) Same as above but colour anodized 18.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A)

Providing and fixing standared extruded of aluminium section

of size 61 x 37.0 x0.90 mm (of Jindal section no.14080, @ Wt.

0.471 Kg per mt) with Powder Coated alluminium frame with

5 mm thick transparent bronze colour tinted float glass as

details etc. complete for fix window

A) Same as above but Colour anodized 2.00 S.M 1833.29

SMC SOR Alluminium Work ITEM NO.5A MR

Providing & laying granite slab 18mm thick in Window-Door seal

Frame Etc laid on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) with nessary adhesive material and finished with flush

pointing in white or colour cement, including rubbing & polishing

comp.. (Basic Rate:- Rs.1000.0/S.M.)

For all Floors. 68.60 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

41 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 567.40 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Providing & fixing M.S.Grills of required pattern to wooden frames of

windows etc. At all floor levels with M.S. flats at required spacing &

42 frame around square or round bars with round headed bolts & round

headed bolts and nuts or by screws incl. Priming coat of Red lead

paint etc. comp.

(A) Plain grill For all Floors 570.60 Kg. 109.41

SMC SOR, PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

For all Floors 28.70 S.M 68.57

SMC SOR, COLOUR IT.No. 8, Pg No.15

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash fasteners , stainless steel bolts

44 etc., of required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-incharge, (for payment

purpose only weight of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.)

SMC SOR, PAGE NO 11 ITEM NO 120, MR 0.00 Kg. 450.00

(1) The whole work is to be executed through specialized agency with a

guarantee of 10 (Ten) years given on a prescribed proforma duly stamped (2)

The rate shall include for work at all floors & conducting water proof test as

directed. (M.R.)

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

B) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs, balconies,

terraces etc. consisting of following operations. (a) Applying and grouting a

slurry coat of neat cement using 2.75 kg/sqm of cement admixed with

proprietary water proofing compound comforming to IS:2645 over the R.C.C.

slab including cleaning the surface before tratment.(b) Laying cement

concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of

cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with proprietary

water proofing compound conforming to IS:2645 ,brick bats is finally covered

by jointless cement plaster 20mm th. in C.M. 1:4 added with special water

proofing compound confirming to IS:2645 & top smooth finished with trowel

with false chequered marking of 300 mm.size.The treatment is carried along

the vertical surface of the parapet & other adjoining wall up to height of about

300 mm in a shape of quarter round vata Incl. curing etc. Comp. With average

thickness of 120 mm and minimum thickness at khurra as 65 mm.(c) The

whole terrace so finished shall be flooded with water for a minimum period

of two weeks for curing and for final test. All above operations to be down in

order and as directed and specified by the engineer-in-charge. With average

thickness of 120 mm and minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.)

(c) The whole terrace so finished shall be flooded with water for

a minimum period of two weeks for curing and for final test. All

above operations to be down in order and as directed and

specified by the engineer-in-charge. With average thickness of

120 mm and minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.)

Terrace and staircabin top 135.70 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

Providing and laying broken china mosaic flooring for terrace

using 12mm to 20mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

46 bring mortar creme out upto surface using white cement

including rounding off junctions and extending them upto 15 cm

along the wall clearing with water and oxalic acid etc. as directed.

SMC SOR, PAGE NO 12 IT NO 131 135.70 S.M 779.70

Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even

47 shade including thoroughly brushing the surface free from

mortar dropping and other matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 418.80 S.M 40.59

(B) for ceilings and soffits

For all Floors 110.70 S.M 40.59

SMC SOR, COLOUR IT.No. 4, Pg No.15

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface to

48 give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand

papered smooth.

(A) for wall and similar surfaces

For all Floors 418.80 S.M 83.36

(B) for ceilings and soffits

For all Floors 110.70 S.M 83.36

SMC SOR, COLOUR IT.No. 5, Pg No.15

Providing & applying two coats of weather shield max paint (3 coats may be

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian

Paint including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and

manufacturers. Surface Preparation : surface is thoroughly clean, dry and free

49 from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be

achieved by brushing with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes. Priming: Apply a liberal coat of exterior

acrylic primer and allow it to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required between each coat of

weather shield max paint

For all Floors 494.50 S.M 82.00

SMC SOR, colour works,Pg No.16,item no.-17

Providing & laying granite slab 18mm thick in flooring, treads

of steps and landing laid on bed of 20mm thick cement

mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid

and finished with flush pointing in white or colour cement

including rubbing and polishing complete. (Basic Rate:-

For all Floors. 0.00 S.M 2410.00

SMC SOR 24-25, PAGE NO 4,IT NO 39 M.R.

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

Providing & laying granite slab 18mm thick in skirting, risers

of steps, dedo and pillars laid on 10mm thick cement mortar

51 1:4 (1 Cement : 4 Coarse sand) and finished with flush pointing

in white or colour cement including rubbing & polishing comp..

(Basic Rate:- Rs.1347.46/S.M.)

SMC SOR 24-25, PAGE NO 4,IT NO 40 M.R. 0.00 S.M 2449.00

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S.

bar bent to shpe with hooked ends to RCC slabs curing, layig

including painting the exposed portion of loops, all as per

standard design complete.

For all Floors. 20.00 Nos 135.47

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint (A) in beams & joists channels angles, tees, flats

with connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common raffers & the

For all Floors. 20.00 Qtl. 9108.48

SMC SOR ,Pg No.9,IT NO 98(A)

Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron

diagonals 20 x5mm size with top & bottom rails of T-iron

40x40x6mm. with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl. applying a priming

coat of Redlead paint etc. comp.

Ground Floor 22.00 S.M 6158.35

SMC SOR , PAGE NO 5, IT NO

Providing & fixing at all floor levels,both face polished machine

cut edge Marble slab for urinal partition joined with

grey/White cement slurry (1:1) incl. Rubbing & polishing etc.

complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 7.50 S.M 1050.00

56 Wall Vinyl Sticker 88.00 SQ. FT. 28.00

SMC SOR, PAGE NO.13,IT NO 146 (MR)

Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

SMC SOR, PAGE NO.13,IT NO 147 (MR)

58 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 88.00 SQ. FT. 22.00

SMC SOR, PAGE NO.13,IT NO 148 (MR)

59 5mm PVC sheet Eco Vinyl (Any size) 88.00 SQ. FT. 55.46

SMC SOR, PAGE NO.13,IT NO 149 (MR)

Decorative theme base designing & painting with all waterproof

materials 1512.00 SQ. FT. 63.00

SMC SOR, PAGE NO.13,IT NO 150 (MR)

Fire extinguisher - CO2 Gas type 4.5 kg.

Supply, installation and testing of CO2 Gas fire extinguisher with

necessary hardware and consumables.

Standard - Confirming to IS:15683-2006 with ISI mark.

UOM - Price per each No. Make - Kanex / Safex / Secure Zone

SMC SOR- Page no 13, It No.

Fire extinguisher - ABC powder type 6 Kg.

Supply, installation and testing of ABC powder fire extinguisher

necessary hardware and consumables.

Stored pressure mechanism.

Charged with MAP-50% (ABC) Dry powder.

with wall mounting clamp.

UOM - Price per each No. Make - Kanex / Safex / Secure Zone

SMC SOR- Page no 13, It No.

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

WATER SUPPLY & SANITATION

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan)

at all floor levels, size 500mm x 400 mm incl. 100 mm size

"P'or "S" trap for water closet squatting pan joining the trap

63 with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc.

Comp.(A) Vitreous china long

Make- Cera S3010109, Jaquar,HindWare

For all Floors. 4.00 Nos. 3277.39

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing Wash Down Water closet European type

W.C. pan with integral P or S trap with normal closing seat cover

64 L bend ncluding jointing the trap with soil pipe in cement mortar

1:1 (1 cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , HindWare sleek

Jaquar- CNS-WHT-751P180SPPZ 4.00 Nos 3530.09

SMC sor- Sanitary Items,Page no20,It No.

Providing and fixing plastic seat and cover for wash down

65 water closet with C.P. brass hinges and rubber buffers (B) Plastic

seat and cover.

For all Floors. 4.00 Nos 291.33

SMC sor Page no7 It No.

Providing & fixing Wash Hung basin with single hole for pillar

tap , Size- 550 x 400 mm at all floor levels, with C.I. or M.S.

Brackets painted white incl. cutting holes & making good the

same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Jaquar SLS- WHT -6801

,HindWare10004 4.00 Nos 3276.63

SMC sor- Sanitary Items,Page no20,It No.

Providing & fixing 600 mm.x 450 mm. mirror of superior

glass at all floor levels, mounted on 6 mm. th. A.C. sheet or

plywood sheet & fixed to wooden plugs with C.P.brass screws

and washers etc. For all Floor

All Floor 4.00 Nos 859.41

SMC sor Page no7 It No.

Providing & fixing C.P. brass pillar cock with copper connection,

C.P. brass screws complete

Make- Cera F2013101,HindWare Cat. No.: F650003, Jaquar FLR-

SMC sor Sanitary Items,Page no20,It No.

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, HindWare F280002 BIB COCK,

Jaquar FLR-5047 N BIB COCK 16.00 NO 1353.77

SMC sor Sanitary Items,Page no20,It No.

Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101 , Jaquar FLR 5083 KN , CONCEALED BODY ALD-

081,HindWare F280052 & CONCEALED STOP COCK F850105

SMC sor Sanitary Items,Page no20,It No.

Providing & fixing 15mm C.P. brass angle valve (Stop Cock)

with C.P. copper connecting pipe 450 mm long and nuts, washer

and brass flange complete, including cutting and making good

the wall where required.

Make- Cera,HindWare

For all Floors. 8.00 Nos 1564.36

SMC sor- Sanitary Items,Page no20,It No.

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished wall

flange at end of bars with heavy duty anchor fasteners &

Make- Cera, Jaquar ,HindWare

For all Floors. 8.00 Nos 924.24

SMC sor Sanitary Items,Page no20,It No.

Providing & Fixing stainless steel recessed type Soap dish of

73 approved make. Including providing & fixing screws, washers,

cutting & making good the walls.

Make- Cera, Jaquar ,HindWare

For all Floors. 4.00 Nos 839.91

SMC sor Sanitary Items,Page no20,It No.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

110x110 mm diameter with jali of the following nominal

74 diameter of self cleaning design with C.I. scread down or hinged

grating including the cost of cutting and making good the walls.

All floor 8.00 Nos 586.27

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

SMC SOR.Page no 8,It No.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

13592 (Type "B") of Prince/ Supreme/ Jain/ Astral/ Tulsi/

Finolex make for soil and waste discharge system at all floor

levels incl. All fixtures like bends, tees, shoe etc. jointed with

resin of approved brand & manufacture etc. comp. (M.R.)

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/Supreme/Jain/Astral/ Tulsi/ Finolex make

76 for rain water at all floor levels incl. fixtures like bends, tees, shoe

etc joined with resin of approved brand & manufacture etc.

SMC sor ,Page no 8, It No. 85 M.R.

Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC drainage

pipes for concealing with cement plaster 20 mm avg

78 thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per

instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 100.00 R.M 173.00

(B) 100 mm /110 mm PVC PIPE 32.00 R.M 180.00

SMC sor- Page no 8, It No. 93 MR

Providing, Laying and jointing on true line and level UPVC pipe

(SCH-40) line of Prince/ Supreme/ Jain/ Astral/ Tulsi/

Finolex make including fittings make or equivalent as approved

by angineer-in-charge. Pipe shall be fixed on the wall the help of

clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of

SMC sor Page no 8 It No.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/

Jain/ Astral/ Tulsi/Finolex make for water supply line at all

floor levels incl. fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc. comp. Pipe shall be

80 fixed on the wall the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

SMC sor Page no 8 It No. 87 MR

Providing and fixing M.S. holder bat clamps at all floor level,of

81 approved design to C.I. or S.C.I pipes including cost of cutting

holes and making good the wall etc. comp. (M.R)

SMC sor- Page no 8, It No.

Providing & fixing Z - clamps at all floor levels of approved

82 design to C.I. S.C.I. or PVC pipes including the cost of cutting holes

& making good the wall etc.

(B) 75 to 90 mm Dia 0.00 NO 75.00

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

Providing & Fixing gun metal check or non return full way

wheel valve at all floors levels, etc. complete.

SMC sor Page no 8,It No.

Providing & Fixing abonite ball cock of approved qualities

directed etc. comp.

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

SMC sor- Page no 8,It No.

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In

85 C.M. 1:1 of following nominal internal diameters incl. Testing of

pipes and joints etc. Comp.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 22-23, Page no1 It No.1

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary

(C.M 1:5)chamber & water tight C.I. cover with frame of

300mmx300mm size (inside) with weight includ. plastering

smooth inside & outside 15mm. th' in C.M.1:3 etc. comp. (i)

Square mouth traps---(A) 100mm x 100mm Size -P type

SMC sor,Page no 7, It No. 73 8.00 Nos 1292.19

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed

87 faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade

stone aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing

C.I. cover with frame to be not less than 38 kg. On top etc. comp.

for single pipe.

(A).Same as above but Precast RCC heavy duty Cover instead of

C.I. Cover 8.00 No. 2915.61

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 233.85

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

1 cement: 2 Sand : 4 Grade stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be

not less than 38 kg. On top etc. comp. Inside dimension,455 x

610 mm &450 mm deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover instead of

C.I. Cover 8.00 No. 2681.76

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39

SMC sor - Page no7,It No.76

Providing and fixing C.I. manhole cover 0.60 mt. x 0.45 mt.

size having weight not less than 35 kg. etc. complete.

SMC sor- Page no.8, It No. 83 8.00 NO 958.17

Providing and fixing G.I, Rain water spout of 50 mm dia and

SMC sor- Page no 6 It No. 64 24.00 NO 101.91

Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and 15mm

91 dia. C.P. spreader,32mm dia CP bottle trap and pipe to wall with

C.P. flange complete including cutting and making good the walls

and floors wherever required.

Make- CeraCat. No. S4020103, Jaquar URS-WHT 13261H

,HindWare BACK SMALL 60001 4.00 NO 2535.70

SMC SOR- Sanitary Items,Page no.20, It No.8

Providing & fixing at all floor levels,both face polished machine

cut edge Marble slab for urinal partition joined with

grey/White cement slurry (1:1) incl. Rubbing & polishing etc.

complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

SMC SOR- Page no7 It No. 66 MR 4.00 S.M 1050.00

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing,

centering, vibrating, curing & mixed with approved water proofing cement

compound or "CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg. cement bag shall

be as recommended by the manufacture of the water proofing material,

concrete work for top, bottom slab & side pardi for Under ground Tank &

Item incl. Necessary excavation & refilling the available earth, 15 cm th' C.C

93 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside R.C.C.

pardi as per design, 10mm.th. water proofing cement plaster in C.M. 1:3 with

smooth finishing,watering etc.Comp.to all inner face & bottom of tank curing

etc. comp. incl. Locking arrangement, outlet, inlet, overflow & wash out pipe

arrangement as necessary & C.I. Cover 0.60 x .045 weight not less then 35kg.

etc. com. as per structural drawing excluding Steel & as directed by

Engineer in-charge

Under Ground water Tank 20000.00 Lit 6.87

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor levels, in

94 flooring, treads of steps & landings laid on a bed of 12 mm. Av.

Th.C.M.1:3(1cement :3 sand) finished with flush pointing in

white cement etc.com. For all floors

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

Under Ground water Tank 22.00 SM 900.29

SMC SOR, Page no4, It No.

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson,Nitco,Somani,Bell make at all floor levels in

skirting risers of steps & dado on 10 mm. th. C.M.1:3(1cement :3

sand) including necessary cement paste for fixing and joined

with white cement slurry etc. complete. For all floors

Under Ground water Tank 56.00 SM 932.02

SMC SOR, Page no4, It No.35

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

96 R.C.C. work incl. bending, binding & placing in position etc. comp.

Upto G.L./P.L. 2160.00 Kg. 77.29

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated Sintex / Super /

Reno PVC (ISI) mark water tank of required capacity each with

all necessary fittings & connection etc. complete on terrace.

SMC SOR- Page no 8, It No.

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

RECHARGE BORE WELL

Drilling 300mm Diameter bore in all types of starta up to any

Depth including cost of bentonite powder carting rings etc.

98 complete the drilling shall be done by mud flushed rotary

equipments; bore holes should withstand at least till period of

subsequent 164.72 R.M 857.00

Supplying best Quality of well- sorted " SEVALIA "pea gravel

having size 4mm to 6 mm at site (Market rate) 6.00 C.M 2029.00

Providing and fitting bail plug having length 0.45mtr. from M.S

100 medium class pipe as per ISI for 200 mm diameter pipe.

Development of each water bearing zone come across up to the

depth of tube well (size 250 mm diameter & depth more then

101 150 ft.) by lowering 100 mm diameter drop line and 32 mm dia.

GI air line for each Zone with air compressor of capacity not less. JOB

Providing & Fixing MS Clamps with threaded of standard make

suitable for ERW pipes.

(a) For 200 mm Diameter ERW blank pipe with size 750 x 75mm

x 10mm thick suitable for 200mm diameter. 4.00 PAIR 1500.00

Excavation and getting out for foundation up to a depth of

2.50mt in and all kinds of soil including leveling and ramming the

bottom of trenchs and foundation pits, shoring, strutting,

dewatering if required slush removing filling the sides up to

(b) 1.50 mt to 3.00 mt. Depth 31.68 C.M 235.05

SOR 24-25 IT-02 PG-01

Providing and laying Cement Concrete M-100 grade 1:3:6 (1

cement: 3 coarse sand : 6 hand brocken stone aggregate 20mm

104 nominal size ) and curing complete excluding cost of form work

in chamber P.C.C(without forms work) work complete. .( S.O.R.-

SOR 24-25 IT-05 PG-01

Providing & laying Fly ash Brick masonary having crushing

strength not less then 70kg/sq.cm. 1:6 (1 cement : 6 fine sand)

105 with scaffolding, watering, curing etc. complete with all labours

and materials.various area as directed by incharge .

SOR 24-25 IT-16 PG-02

Providing 10mm thick Cement Plaster in single coat on

brick/concrete walls far interior plastering up to Floor two level

106 and finished even and smooth in cement morter 1:3(1 cement

sand various area as directed by incharge) .

SOR 24-25 IT-24 PG-03

Providing, fixing M.S Jali frammed work (three piece with handle

fitting) on Opening portion Precast Module Structure for

Prevention of Recharge bore well structure,size including

107 framme, heavy required Angle (40 x 40 x 6mm), flat pati (25 x

SOR 24-25 IT-98 PG-09

Providing & Supplying 200mm dia mater 1.5mm L.C.G (Low

Carbon Galvanise) 'V' wire screen pipe of Johnson or approved

108 make ISI including lowering, fixing, jointing in bore hole as per

aquifer depth and pipe assembly given as per site condition Soil

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

Providing, Supplying, Fixing in bore hole 6Kg/cm2 P.V.C Pipe of

approved Quality (Prince,Suprem, Finolex) with ISI mark

109 including nesessary fittings and providing as per site sitution and

directed by Engineer –in- charge.

Providing, Supplying, Fixing P.V.C. 6 Kg/Cm2 Pipe IS stanadard

for down take / inlet from Bldg./ Structure to Sand filter

Chamber, including piping/ plumbing, fitting, wall clamping,

necessary excavation and filling etc. complete as per site

(a) 110mm Dia.,6 Kg/Cm2 P.V.C. pipe. 14.00 R.M 325.00

(b) 160mm Dia., 6 Kg/Cm2 P.V.C. pipe. 40.00 R.M 525.00

Providing, supplying, fixing and installing M 300 Grade. precast

size 1.5 dia x 2.35 mt. height ,top 75mm thick in 2 half pieces

111 Sand Filteration chamber (2 layer Type of Precast module )as per

Design, Drawing.including necessary excavation, filling, dr

(a) 1 layer type of Precast module 0.00 NO. 18500.00

(b) 2 layer Type of Precast module 4.00 NO. 25000.00

Proving & fixing in position Johnson make and equivalent ... 'V'

wire L.C.G screen pipe 1.00 mm size of filter assembly of pair –ID

112 205mm & OD 217.50mm of 0.5mm slot size and ID 416 mm and

OD 428 mm of 1.00mm slot size as per site situation

(a) 1.0 mt. length. 0.00 SET 7500.00

(b) 2.0 mt. Length. 4.00 SET 14000.00

Borehole Video photography all the fresh new fresh new bores or

few selected as desired for better understanding & clarity of

work undertaken as directed by Engineer -in-charge.

Supplying water tankers for constant water supply at tube well

Compressor work and cleaning of work site after completion of

114 entire job (testing) inluding cleaning of mud etc.Location as

directed by Engineer-in-charge.

Providing and Fixing Recharge Borewell name boards as per

standard I.R.C type design of steel plate including painting

lettering etc. complete with fixing in C.C 1:4:8 block with

necessary excavation. 2.00 No 5006.00

Soil Investigation Test report from Govt.approved authorised

laboratary (Prior inserting bore Pipe) of each bore shall be

116 submitted by Contractor and soil sample of various starta shall

be first collected in Polythene bag and than submitted in EACH

transparent 4.00 BORE 6000.00

Removal of surplus excavated earth of excavated mud-pits and

water harvesting chambers up to the lead of 5.0 km as per the

instruction of Engineer In Charge

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

ELECTRICAL WORK

INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

119 erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete 0.00 Pt. 445.00

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete 48.00 Pt. 481.00

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and

120 accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete 0.00 Pt. 632.00

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete 8.00 Pt. 668.00

Point wiring for Tissino / Modular secondary light point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires, in below type of pipe to be erected complete with earth

continuity and necessary connection with primary light with

accessories erected on Metal / PVC / wooden box covered with

3 mm thick PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete 0.00 Pt. 131.00

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete 8.00 Pt. 166.00

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Cat. III 0.00 Pt. 471.00

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Cat. III 16.00 Pt. 505.00

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Cat. III 0.00 Pt. 704.00

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Cat. III 16.00 Pt. 738.00

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

with following type accessories

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

Cat. III 16.00 Pt. 255.00

Switch gears and Accessories

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

125 phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp.

Cat.III 4.00 Ea. 297.00

providing and erecting Miniature circuit breaker single pole 6A

to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

Cat.III 16.00 Ea. 111.00

Providing and erecting metallic vitrified danger notice board as

per language suggested by engineer incharge for MEDIUM

VOLTAGE installation to be erected as per IS-2551.

Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

129 & connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner.

Providing and erecting required size HOT deep Galvanised iron

strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel

board, Motors etc. using proper clamp.

Supplying & erecting in earthpit of minimum bore dia. 225mm

size approved make Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive

131 compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed

by agency and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

[A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

INDOOR LIGHTINGS & OUTDOOR LIGHTING

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Cat-III 40.00 Ea. 370.00

Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning hours

life, 500 V in built-surge protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP

(ii) 5 to 8 watts

Cat-III 8.00 Ea. 111.00

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN rail

for mounting mob & hinged doors as per requirement having

locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps& earth

bolt of following size of box.

(B) 250mm x 200mm x 100mm [deep] 8.00 Ea. 510.00

Providing and erecting street light pole bracket comprising main

B Class MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx. 45cms.length and

suitable for 76.5 mm / 80mm. / require size pole top having

sufficient fasteners for fixing the brackets and having spread of

135 mtr. length with suitable rise as per site condition & suitable

welded stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 1 Mtr 8.00 Ea. 556.00

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

136 Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

(i) above 36 to 48 watts

Cat-lll 8.00 Ea. 3312.00

Supplying and erecting Flexible PVC insulated multi strand multi

137 core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed 200.00 Mtr. 46.00

Fans and Accessories

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades

with aluminium blades with , canopy & 30 cm. down rod erected

with earthing.(Make shall be approved by Engineer in charge))

Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size and

maximum speed in RPM

[A] 305 mm dia 900 RPM

Cat.II 8.00 Ea. 2034.00

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and

141 pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

DESCRIPTION UNIT 24-25 AMOUNT

NO. TOTAL QTY. WITHOUT GST

WATER PUMPS & RO COOLER

Supplying and erecting Direct On-line Electronics Starter with 2-

5/4-10/8-14/10-16 Amp. Rating relay (variable current setting)

directly operated in totally insulated elegant enclosure and

Amp. Rating power relay with start - stop button for single phase

operation up to 3 HP as per complete erected on P.W. Block with

following features.

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]

Supplying & erecting approved make self-priming domestic

monoblock water pump with 1 H.P motor, suitable for operation

143 on 230 volts, 50c/s. AC supply with metallic flange, and M.S.

impeller delivery and following discharge

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia. Delivery

Cat.III 4.00 Ea. 7603.00

Providing & erecting open well type horizontal mono block pump

144 set with stainless steel body having following specification

(C) 1 H.P. single phase open well motor pump set suitable for

185 LPM discharge @ 25 mtr. head, suitable for 32 mm dia.

Delivery pipe with control panel.

S.I.T.C. of single phase submersible pump set suitable for

mm size or more dia bore well having motor capacity and

discharge as under with necessary panel box. Lifting and

Lowering taken extra.

(a) Motor rating 1 HP (12 stage) pump having capacity of 50 LPM

at 43 to 45 mtr head suitable for 32 mm dia. delivery pipe

Providing and erecting ISI marked PVC insulated PVC Sheathed

146 Flat flexible Submersible copper cable approved make of

following Size.

(A) 3 Core x 1.5 Sq. mm. 400.00 Mtr 65.00

Providing and erecting water cooler having storage capacity

80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of

45˚ C. The outlet temp. of the water should drop by 15˚ C within a

hour, The water cooler should be comprising of hermetically

147 sealed compressor, fan motor, condensing unit, water tank

surrounded by evaporating coil, thermostats, relay etc. complete

with necessary inlet & outlet connection. The body of water

cooler will be made from Stainless Steel. ◦

Supplying and erecting water filter cum purifier with ultra

148 violate technology. (Aquaguard / waterdoc model or equivalent

symphony/ crystal/videocon model) 4.00 Ea. 5371.00

Supplying and erecting HYLAM sheet on existing angle iron

frame.for following thickness

(B) 4mm 4.00 sq.mtr 764.00

TOTAL TENDER AMOUNT

Executive Engineer

New East Zone (Sarthana)