Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹2.0 Cr+₹10.4 L (5.41%)Accepted-AOC | ₹2.0 Cr+₹10.4 L (5.41%) | L2 | Accepted-AOC L2 Being Government agency and experienced firm, work awarded to SILK-Steel Fabrication Unit for an amount of Rs 20294725 after negotiation. |
| 2 | L1₹1.9 CrRejected-AOC | ₹1.9 Cr | L1 | Rejected-AOC L1 Being Government agency and experienced firm, work awarded to SILK-Steel Fabrication Unit for an amount of Rs 20294725 after negotiation. |
| 3 | Rejected-Technical | - | - | Rejected-Technical RATE FOR PARTIAL ITEMS |
Tender Value
₹2.0 Cr
EMD Value
₹1 L
Closing Date
3 Nov 2020, 6:00 pmClosed
Secretary Alappuzha Municipality
Secretary Alappuzha Municipality
AMRUT SAAP - 2015-16 ALAPPUZHA MUNICIPALITY - URBAN TRANSPORT SECTOR - CONSTRUCTION OF FOB AT NEHRU TROPHY
2020_LSGD_393153_1
AMRUT/FOB NT
Open Tender
Civil Works - Bridges
Item Rate
270 days
Alappuzha
Please refer Tender documents.
5 documents required · 5 mandatory
₹8,925
Yes
online
₹1 L
Yes
27 Oct 2021
20 Oct 2020
5 Nov 2020
20 Oct 2020
3 Nov 2020
20 Oct 2020
Amount
EARTH WORK
2.2 : Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area
2.4.1.A : Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres -<br> Lime Concrete, cement concrete grade M-10 and below - By Manual Means <br>
PILE AND PILE FOUNDATION
12.22 : Providing Steel Liner 10mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawing.
od42707/2019_2020 : Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-35 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).<br>600 mm dia piles
12.39 : Providing and laying of PCC M15 leveling course 100 mm thick below the pile cap
12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications
12.1.B.1 : Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. <br> Ordinary Soil - Depth upto 3m - Mechanical Means <br>
12.38.D.2 : Cement Concrete for Reinforced Concrete in Pile Cap complete as per Drawing and Technical Specification<br> R C C Grade M35 - Using Batching plant, Transit Mixer and Concrete pump
od443622/2019_2020 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications<br>PCC Grade 1:4:8
12.8.G.2.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M30 - Using Batching Plant, Transit Mixer and Concrete Pump
LOAD TEST
od364454/2018_2019 : Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.<br>Single pile above 50 tonne and upto 100 tonne capacity<br>Initial test
od443164/2019_2020 : Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.<br>Single pile above 50 tonne and upto 100 tonne capacity<br>Routine test
RING BUND
od42206/2019_2020 : Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete
od443840/2019_2020 : Providing ring bund across the river in each side of the proposed bridge by driving down of coconut piles of 7.5 m long, brazed with same , screening with bamboo reeper frame and two layers of plastic padutha filled with local stiff clay reinforced with leafed branches of trees for bund of size 1.5m at top ,4m at bottom and 3m high and dismantaling and removing the debris to clear the thodu to the initial status complete
RCC WORK
14.1.C.1 : Furnishing and Placing Reinforced Cement Concrete Grade M30 Using Concrete Mixer in super-structure as per drawing and Technical Specification
od364064/2018_2019 : Centering and shuttering including strutting, etc. and removal of form for:<br>Suspended floors, roofs, landings, balconies and access platform
od364059/2018_2019 : Centering and shuttering including strutting, etc. and removal of form for:<br>Lintels, beams, plinth beams, girders bressumers and cantilevers
od364112/2018_2019 : Centering and shuttering including strutting, etc. and removal of form for:<br>Columns, Pillars, Piers, Abutments, Posts and Struts
od364113/2018_2019 : Centering and shuttering including strutting, etc. and removal of form for:<br>Stairs, (excluding landings ) except spiral - staircases)
od364114/2018_2019 : Centering and shuttering including strutting, etc. and removal of form for:<br>Edges of slabs and breaks in floors and walls<br>Under 20 cm wide
od364119/2018_2019 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level<br>Thermo - Mechanically Treated bars of grade Fe-500D or more
STEEL WORK
od11855/2019_2020 : Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.<br>In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete
od11780/2019_2020 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.<br>Electric resistance or induction butt welded tubes
od364124/2018_2019 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.<br>M.S. tube
od364282/2018_2019 : Providing and applying protective coating for structural steel work with one coat primer of surface tolerant Epoxy Mastic coating with 85%volume of solids at 100 microns DFT withintermediate coat of Epoxy Micaceous iron oxide coating with minimum volume solids of 80 % DFT of 125 microns and finishing with two coats of Acrylic Aliphatic Polyurethane coating of minimum volume of solids of 45 % and 35 microns DFT per coat including cost and conveyance of all materials ,labour,surface prepration by abrasive blast cleaning to Sa2.5, lead lift etc complete at all levels as directed by Engineer in charge
FINISHING WORKS
od42461/2019_2020 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
od364016/2018_2019 : Finishing walls with acrylic Smooth exterior paint of Required shade:New work Two or more Coat applied @1.67 ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm
SANU & CO
SILK-Steel Fabrication Unit
Bidder Name
KERALA ELECTRICAL AND ALLIED ENGG CO LTD
SANU & CO
SILK-Steel Fabrication Unit
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_559307.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .