SPECIAL REPAIR TO BLDG NO. P-18 OTM ACCN OF ASC (SUP) TYPE G UNDER GE MISSAMARI

Amount

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames)

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame)

S & F facroty made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.

S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.

S & F Solid PVC Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc.

S&F Factory Made Solid PVC Moulded Door Shutter, with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F anodised aluminium frame for doors, windows, ventiletors with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron).

S&F for anodised window/ventiletor shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl power coating of any colour (thick ness of powder coating not less than 50 micron).

S&F for anodised Alum three track sliding window and ventiletor frame side/top made up 123.45 mm /44 mm 1.5 mm thick bottom 128.00mm/ 39.15mm / 1.63mm aluminium section & shutter made up 69 mm / 25.40 mm/1.63 mm and 50.80 mm/ 25.4mm/ 1.63mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment etc , two track for glass and one track for aluminium wire mesh etc as directed by engr in charge . incu power coated of any colour (thick of power coating not less than 50 micron ) & prividing AC hole as directed by engr in charge.

S&F framed work as in grills, grating etc with end of bars shouldered and or riveted or forged into spikes, framed guard bars, brred iron doors and similar works to fe 290.gde E-150.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane

Supplyand fixed aluminium wire cloth with 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.

M&L 18/19 mm thick pre-laminated particle boards exterior grade prelaminated both sides with decoratative choice lamination fixed in alum frame work.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast.

S&F mild steel flat iron of size 50x3mm as in hold fast

S & F 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified.

S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level slimline or equivalen make / model with all accessories.

Supply & Fix in repairs Vitreous WC size 580 x 440 mm white with includig 'P' or 'S' traps.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand.

S &F in repairs Vitreous china urinals, bowl typeflat back size 465 x 355x 265 mm whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws.

PVC connection 15 mm bore 450 mm long

S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges.

Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises.

Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 .

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.

Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedded and pointed in any morter etc

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completein riser of steps, skirting, dado and pillar laid over cement screed and jointed

Demolition of Reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Pre-cast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in landing, cover slabs (for manhole covers, drains etc) set in CM 1:6 complete all as specified.

M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etc binding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete.

M&L for 75 mm thick cement concrete as in plinth protection type C-2 1:3:6 (using 40mm graded aggregate) finishing concrete surface even and smooth with using extra cement complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floors NOTE: Water proofing compound will be measured separately

M&L applying one coat of NITTO proof to sides and bottom of floors to sunken floors.

M & L for plain cement concrete Type E2 1:5:10 (using 40mm graded granite stone aggregate) in foundations, filling and mass concrete.

Add fixed in repairs 4mm dia plain mild steel wire, galvanised class 3 incu staining and fixing and incl necessary hooks for securing in wall/ceiling.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed.

M & L for 4m thick Non Asbestos designed Cement E board incl two coats of distempering in one side as approved by GE of size fixed in ceiling as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed.

M&L for brick work with burnt old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius and all as directed.

M&L for half brick work burnt modular bricks built in cement mortar 1:4 straight or curved on plan exceeding 6mtr mean radius and all as directed.

M&L for 20mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @3% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth.

M&L rendering 5mm thick of cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth(without using extra cement.).

Supply only Integral water proofing compound

Dismantling plain or corrugated asbestos sheeting any thickness in roof covering.

S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for brushing neat cement slurry with 03 Kg of cement per Sqm

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 . (Internal water proof compound measured seperately)

M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified.

Taking down rain water pipes inculding all fittings any size and pattern

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door

S & F 110 mm bore PVC (SWR) Vent Cowl

S&F 50 mm bore sand cast cast iron soil waste in any length with or without ears with cement joints laid in trenches or in floors

S&F 50 mm bore bends any radious with ducks foot or heel rest.

M&L 50 mm bore for cast iron floor trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F in repairs 15mm bore angular/ concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union

S&F in repairs For Stop valves,15 mm bore diacast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedbut fancy type, chromium plated with long shank and cup (concealed type)

M&L for BOARDING IN ROOFS, CEILINGS, PARTITIONS, FASCIA, BARGE, SOFFIT, ETC. supplied & fixed with nails in any situation (except flooring and skirting) Clean sawn with butt joints including Dismantling boarding, any description, fixed in any position with nails 20 mm thick all as specifed and directed.

Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise proveded for.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified

Preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint.

Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint.

Preparation of old painted wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty.

M & L for Complete removal of old surface for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty.

M&L for preparation of new plastered surfaces of walls and applying two coats of Distempering oil - emulsion, over 1 mm thick wall care putty. complete all as specified and directed.

M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering over 1 mm thick wall care putty. complete all as specified and directed.

Preparing new surfaces of ceilings by brooming down or by steel wire brushing and applying three coats of white wash.

M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete.

Dismantling water tanks and removing to store exc 500 & not exc 1000 ltrs

S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed.

Taking down carefully existing unserviceable copper/ aluminium point wiring (light,call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators,bracket light fittings and making good to the disturbed surface complete all as directed by Engr-in-Charge.

Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified by Engr-in- Charge.

Taking down carefully unsv aluminium submain wiring of any type /loc including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes all as directed by Engr-in-Charge.

Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including PVC conduit of appropriate size concealed in wall, pressed steel concealed terminal boxes of required size and with top cover 3 mm thick of plastic laminated sheet of reqd colour, painting terminal boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light / exhaust fan/ bell point controlled by one switch.Make :- Havells / Polycab/ RR Kabel / KEI Note:- 1. Cost of PVC conduit, steel terminal boxes, plastic laminated sheet cover etc; are deemed to be included in the quoted rate. 2. Cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3)and ,putty and plastic paint matching with existing surface etc; shall be deemed to be included in the rate quoted above. : (a) One light point controlled by one, one way switch 5 Amps

(b) One ceiling fan / exhaust fan point controlled by one , one way switch and regulator

(c) One 3 point 5 Amps socket outlets point controlled by one switch on the same board

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

Description all as per item No 104 here in before but for one light point controlled by one, two way switch 5 Amps

All as per item No 104 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board.

S & F Switch piano (White) flush type single pole one way 5 Amp, 230 Volts complete all as specified.Make:- Legrand/Anchor/ABB/C&S

S & F Modular switch piano (White) single pole flush type, two way, 6 amps, 230 volts.complete all as specified and directed.Make:- Legrand/Anchor/ABB/C&S

S & F Socket outlet (White) 2 in 1, 3 pin, 5 Amps complete all as specified and directed.Make:- Legrand/Anchor/ABB/C&S

S & F Switch socket combination (White) flush type multipurpose 5/6 pin 5 Amps two in one , 230 volts complete all as specified . Make:- Legrand/Anchor/ABB/C&S

S&F Switch socket combination (White) 2 in 1 5/6 pin, 15 Amp flush type universal. Make:- Legrand/Anchor/ABB/C&S

S&F ceilling rose (White) three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all specified . Make:- Legrand/Anchor/ABB/C&S

S & F ceiling fan regulator (White) step type, flush type heavy duty suitable to work on 230 Volt AC supply complete all as specified.Make:- Legrand/Anchor/ABB/C&S

S & F Lamp holder (White) with insulated body, with back plate suitable for batten fittings complete all as directed.Make:- Legrand/Anchor/ABB/C&S

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make-Make- Havells, Cat No: LHLDEUEBML8Z010 or equivalent in Crompton /Philips / Surya.

S & F sheet metal enclosure MCB VTPN 8 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for 4 Pole MCCB 125 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed.Make-L&T/ Schneider/ Legrand / Seimens

S & F MCCB 4 Pole 415 volts 125 Amps with thermal - magnetic release with breaking capacity 36 KA and with adjustable overload setting complete all as specified. Make-L&T/ Schneider/ Legrand / Seimens

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified. Make-L&T/ Schneider/ Legrand / Seimens

S & F MCB Double Pole 32 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, B-curve, complete all as specified and directed.Make-L&T/ Schneider/ Legrand / Seimens

S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, B-curve, complete all as specified and directed. Make-L&T/ Schneider/ Legrand / Seimens

Supply and fixing LED lights fitting 1x 20W, 220V, Basic all purpose surface and wall mounted LED batten with aluminum housing & integrated electronic driver. , environmental friendly energy efficient ready to use pack with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make :- Model No.LUMILINE+BS20WLED830SPCSS of Havells or Equivalent in Surya / Crompton / Philips

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make- Havells Cat Part No. ENDURASUNDOWNSL25WLED765PASYBOPCIHD or equivalent in /CG/Surya / Philips

Excavation in trenches n exc 1.50 m wide and n exc 1.50 m depth in soft /loose soil and getting out for lying of cable and errection pipe etc complete all as directed.

Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as directed.

Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.

M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed.

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.

Supply & Laying XLPE LT heavy duty UG Cable of size 50 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. Make :- Polycab / Havells / RR Kabel / Gloster

S & F GI Tubing light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed.

Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan complete all as specified and as directed.

M & L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through & including PVC conduit of suitable size in Surface/concealed all as directed.Make :- Havells / Polycab/ RR Kabel / KEI

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia connected to main earthing lead from earth electrode to test point upto 7.5 metre drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I.

Supply and Fix Cable end termination kit for LT 1.1 KV Cable for Cable 50 Sqmm 3.5 Core cable complete all as specified and directed . Make :- Raychem / Denson / Birla-3M

S&F in repairs 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 63 mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.

S&F in repairs 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 32mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.

S&F in repairs PP-R Gate Valves (Brass Insert) 32mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and as directed.

S&F in repairs PP-R Gate Valves (Brass Insert) 63 mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and as directed.

Cutting of existing CI/DI pipe laid 80 mm dia for inserting Tees for new connection of 80 mm x 63 mm dia all as specified and directed by Engr-in - charge

M&L for connection pieces for inserting 63 mm PPR pipe into 80 mm distribution mains all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 63 mm x 32 mm including cutting and making fusion joint etc all as specified and directed.

M/S Mahabir Traders

M/S Himalayan Trading Co

Sunrise Enterprise

Markson