DEVELOPMENT OF SENIOR CITIZEN PARK AND YOGA CORNER AT F.P. 73, T.P.233 (TRAGAD) IN CHANDLODIYA WARD, NORTH WEST ZONE, AHMEDABAD

BILL OF QUANTITY

Name of Work:- DEVELOPMENT OF SENIOR CITIZEN PARK AND YOGA CORNER AT F.P. 73,T.P.233

(TRAGAD) IN CHANDLODIYA WARD, NORTH WEST ZONE,AHMEDABAD

Unit Rate Amount

Civil Work Estimate

1 Demolition & Dismantling work

Demolition of RCC work using Hydra Breacker including

stacking of servicable materials and disposal of unservicable

materials with all lead and lift.Removal Of Existing Building

Foundation and Super Structure If Any. 1047.38 Cu.M.

Demolition of Brick work and stone masonry including

stacking of serviceable materials and disposal of

b 17.00 unserviceable materials with all lead and lift.(ii) In Cement

Mortar.Removal Of Existing Building Foundation and Super

Structure If Any. 544.95 Cu.M.

Dismentaling of sheet roofing including ridges, Hips, Valleys,

c Gutters etc. stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.

i 10.00 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 10.00 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including distempering and stacking

the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, hold fasts and

other attachment etc. complete and stacking them with in all

lead and lift. (i)Notexceeding 3 Sq.M. in area. 185.85 Each

Removing & Scrapping of Old deteriorated Plaster of any

thickness from Masonary / R.C.C. member including stacking

of serviceable material & disposal of un serviceable from site

of work with all lead & lift. 19.38 Sq.M.

Dismentaling any type tiled of stone floors laid in mortar

g 100.00 including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. 47.25 Sq.M.

2 Excavation for foundation including sorting out stacking of

useful material & disposing of excavated stuff upto 50 mt.

lead. Loose & Soft soil.Excexuted With Mechanical Effort

a 351 up to 1.5 mt. depth 115.92 Cu.M.

b 43 1.5 to 3.0 mt. depth. 128.52 Cu.M.

c 16 3.0 to 5.0 mt. depth 141.11 Cu.M.

3a 1 Provdg. & laying cement concrete 1:5:10 (1 cement :

course sand : 10 hand broken aggregates 40 mm nominal

size) and curing complete, excluding cost of form work in

foundation & Plinth. 2492.51 Cu.M.

3b Provdg. & laying cement concrete 1:3:6 (1 cement : 3 coarse

sand : 6 hand broken stone aggregates 40 mm nominal size)

and curing complete excluding cost of form work in

1 (A) Foundation and plinth 2976 Cu.M.

3c 5 Supplying of graded hand brocken stone size of 90 mm to

127 mm at site (Rubble or Spoul)

3d 20 Labour charges for spreading the spouls 90 mm to 127 mm

thick layer good earth filling in voids correcting the grade &

camber comp. with rolling, watering, incl. preparing

thesurface by brushing for removing all loose or dirts

ect.comp. 16.07 Sq.mt.

4 98.00 Provdg. & laying cement concrete 1:4:8 (1 cement : 4 coarse sand :

8 hand broken stone aggregates 40 mm nominal size) and curing

complete excluding cost of form work in foundation& plinth.

5 130 Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidation each deposited layer by ramming and watering.

6 Conveyance charges of earth lime, murrum, building rubbish,

manure, garbage, sludge, excavated rock, fly ash, aggregate of any

kind etc. comp.

a 100.00 Conveyance charges upto 1 km 46.63 Cmt

b 100.00 Conveyance charges upto 2 km 60.69 Cmt

c 250.00 Conveyance charges upto 5 km 100.44 Cmt

d 250.00 Extra For Lead on Above Item Above 5 km & upto 6 km 9.26 Cmt

e 250.00 Extra For Lead on Above Item Above 6 km & upto 7 km 9.26 Cmt

f 250.00 Extra For Lead on Above Item Above 7 km & upto 8 km 9.26 Cmt

g 250.00 Extra For Lead on Above Item Above 8 km & upto 9 km 9.26 Cmt

h 250.00 Extra For Lead on Above Item Above 9 km 9.26 Cmt

7a 5 Filling in plinth with sand under floors including watering, ramming,

consolidating, compacting and dressing etc. completed.

7b 135.00 Filling in foundation and plinth with murrum or selected soil in layers

of 20 cm. thickness including watering, ramming and consolidating

etc. Complete. 286.2 Cmt

8 Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg/Sq. cm. in cement mortar 1:6 (1 cement

: 6 fine sand) conventional brick

a 93 (a) in foundation & Plinth 3981.21 Cu.M.

b 79.00 Super structure Upto Floor Two Level

9 I.Half brick masonry in common burnt clay building bricks having

crushing strength note less than 35 Kg/Sq. Cm. in cement mortar 1:4

(1 cement : 4 coarse sand) using conventional brick in Super

structure upto floor Four level

a 10.00 All Floor Level 646.7 Sq.M.

10.1 Providing and laying controlled cement concrete of M-25 Grade and

curing complete, Excluding the cost of form work, Scaffolding, cost of

reinforcement for reinforced concrete work For any Height up to any

a 36.00 Foundations,Raft,Footings,Mass concrete 4238.04 Cu.M.

b1 24.00 RCC Retaining wall at All Floor 4519.88 Cu.M.

Tie-Beam, Lintel , Beam- Bracket, Stair Case & Landing, Coping

,Slab, balcony, weather shed, loft , any cantilever etc All Floor

d1 16.00 Columns,Pillars, posts and struts at All Floor 4593.91 Cu.M.

10.2 Providing and laying controlled cement concrete of M-20 Grade and

curing complete, Excluding the cost of form work, Scaffolding, cost of

reinforcement for reinforced concrete work For any Height up to

Floor Four Level.

a 43.00 Foundations,Raft,Footings,Mass concrete 3977.88 Cu.M.

b1 9.00 Tie Beam , Lintel , Beam- Bracket , Coping ,landing, Slab, balcony,

weather shed, loft , any cantilever etc at All Floor 4460.36 Cu.M.

c1 1.00 Column at All Floor 4558.2 Cu.M.

10.3 Drilling suitable holes in reinforced or plain cement concrete with

power driven drill machine to a minimum depth of 80mm upto

250mm in RCC beams, lintels, columns and slabs to introduce steel

bars for sunshades/balconies including fixing the steel bars in

position using Hilti Chemical HY200-R but excluding the cost of

reinforcement, all complete as per direction of Engineer-In-Charge.

a 5.00 8 mm Dia in 80 mm Deep & 12 mm Dia Drilling 183.52 Each

b 5.00 10 mm Dia in 100 mm Deep & 14 mm Dia Drilling 263.66 Each

c 5.00 12 mm Dia in 120 mm Deep & 16 mm Dia Drilling 343.80 Each

d 5.00 16 mm Dia in 160 mm Deep & 20 mm Dia Drilling 608.63 Each

e 2.00 20 mm Dia in 200 mm Deep & 25 mm Dia Drilling 1024.44 Each

f 2.00 25 mm Dia in 250 mm Deep & 32 mm Dia Drilling 1938.54 Each

11 Providing and laying controlled cement concrete 1:2:4( 1cement :

coarse sand : 4 Graded stone aggregate 20 mm nominal size ) and

curing complete, Excluding the cost of form work and reinforcement

for reinforced concrete work in:

a 1.00 Foundations, footings, base of columns,grade slab and

mass concrete. 3923.53 Cu.M.

b 1 slab, landing shelves, Balconies, lintels, beams, girders, and

cantilever, up to aany floor level. 4012.47 Cu.M.

30.00 P/A Trimix with dewatering machine and floater machine on

c constructed R.C.C. work incl. cost of machine and labour etc.

comp. as directed. 54 Sq.mt

d 6.00 Making 15 mm Groove in R.C.C work on road and filling it

with poly sulfied selant and finished it good incl. all labour

charges etc. comp. as directed 30 Rmt

12 Providing form work in ordinary timber planking so as to give

a rough finish including centering, shuttering, strutting and

propping etc. height of propping and centering below

supporting floor to celling not exceeding 4 M & removal of the

same for in situ reinforced or plain concrete work in

a 101.00 (A) Foundation, footings, bases of columns etc. and mass

concrete. 171.68 Smt

b 60.00 (B) Flat surface such as soffits of slabs, landing and the like

c 110.00 (C) Vertical surfaces such as walls (any thickness) partitions.

(D) Columns, pillars, posts & struts.

d 122.00 (1) Square, rectangular, polygonal in plan 297.68 Smt

e 238.00 (H) (1) Sides and soffits of beam, haunchings cantilevers,

girders, bressumers, Coping and lintels not exceeding 1 M in

depth. 192.15 Smt

f 4.00 (L) chullah hoops, weather sheds, chhajas, carbels etc

including edges. 155.78 Smt

13 Providing T.M.T Fe 500D bar reinforcement for R.C.C. work

including bending, binding and placing in position complete

up to any floor level..

a 16610.0 All Floor Level 75.46 Kg.

14 259.00 Providing and laying polished Kota stone slab (Polished /

River Finish, Green colour ) flooring over 20 mm. (average)

thick base of cement mortar 1:6 (1 cement : 6 coarse sand)

or lime mortar 1:1.5 laid over and joined with grey cement

slurry including rubbing and polishing complete.25 mm th.

15 5.00 Providing and laying polished Kota stone slab 25 mm. thick

in Platform ,Riser of Stair , Skirting, Tread , dado and pillars

laid on 10 mm. thick cement mortar 1:3 (1 cement : 3 coarse

sand) jointed with grey cement slurry including rubbing and

polishing and MAking groove where it is Required etc. compl

16 1.00 Providing and laying white/Colur glazed tiles 6 mm thick in

flooring treads of steps and landing laid on a bed of 12 mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) finished

with flush pointing in white cement. 908.17 Sq. M.

17 60.00 Providing and layingWhite / Colour glazed tiles of size

mmx300mm x 8 mm / 300 mmx 450mm x 8 mm in skirting,

risers of steps, Floor and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

cement slurry. 1426.95 Sq. M.

18 1.00 Providing and laying marble stone slab flooring over 20 mm.

(Average) base of cement mortar 1:6 (1 cement: 6 coarse

sand) or L.M. 1:1.5 laid and jointed with grey cement slurry

including rubbing and polishing complete: (A) Marble slab

mm. thick. 2194.63 Sq. M.

19 10.0 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24''

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand) finishing

with flush pointing in white cement. 1062.5 Sq. M.

19b 4.0 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24''

in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1cement : 3-coarse sand) and jointed with white

cement slurry 1130.15 Sq. M.

20 7.0 Providing and laying Ceramics tiles 6 to 8 mm thick in

flooring, treads of steps, landing and dedo on 12 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry. 960.47 Sq. M.

21 85.00 Providing & Laying 18 mm thick Mirror polish granite For

flooring , counter , stair riser , tread , skirting , dedo , Jambs

Seating etc. machine cut or chiselled on bed of cement

mortar 1:1 pointing with neat cement slurry incl. moulding,

Making grooves where it is required etc. comp. as per

instruction of engineer in charge. 2385.71 Sq. M.

22a Provdg. 20 mm. thick Finish / Mala cement plaster in single

coat on fair side of brick / concrete walls for interior

plastering upto any Floor level and finished even and smooth

i 302.00 All Floor Level 190.58 Sq.M.

b Provdg. 20 mm. thick Finish / Mala cement plaster in single

coat plastering on ceilings, Beam side and sofits of stairs

upto any Floor level and finished even and smooth in

i 14.00 All Floor Level 215.15 Sq.M.

c 87.00 Providing & fixing 23 cm wide chicken mesh jali with nails &

then application of 15 mm plaster on R.C.C. & masonary

joints as per dir. of engg. In charge. 315.15 Sq.mt

d 15.00 Providing and mixing water proofing materials in cement Per Bag

mortar in proportion recommended by the manufacturer. etc. of 50 Kg

comp. as per instruction of engineer in charge. of

23a 252.00 Providing 20 mm th. Double coat Sand face / Mala Cement

Plaster on Walls upto any Height Above Ground level

consisting of 12 mm th. Backing coat of C.M. 1:3 ( 1 cement :

3 Ssand ) & 8 mm th. Finishing coat of C.M. 1:1 ( 1 cement :

1 sand ) ets. Complete. 297.68 Sq.M.

24a 10.00 White / Color washing with lime on undecorated wall

surfaces (two coats) to give an even shade including

thoroughly brooming the surface to remove all dirt, dust

mortar drops and other foreign matter. 12.29 Sq.M.

24b 251.00 Providing & Applying 3 mm thick External Wall Rustic Type

Texture as per Design & Make as Approved by Consultants

/ Engineer in Charge. Work Includes All Necessary

Scaffolding Work upto Any Height. 424.92 Sq.M.

24 c 550.00 Finishing walls with Acrylic Smooth exterior paint of required

shade :New work (Two or more coat applied @ 1.67 ltr/10

sqm over and including priming coat of exterior primer

applied @ 2.20 kg/10 sqm) 174.97 Sq.M.

24d 5.00 P./L. METALIC HERITAGE SURFACE TEXTURE

Providing and fixing of HERITAGE textured homogeneous

wall finishing system from BAKELITE HYLAM LTD or

equivalent make consisting of a two component system of

(25 kgs per Pack) made of 92% silica particles coated with

fade resistant pigments, 100% acrylic polymer bonding agent

(5kgs per pack) with the applied thickness of the coating

being between 0.8mm-1.2mm to be applied on acured,

smooth level plaster without keying, as per the

shades/combinations approved, as per the manufacturer

directions, for usages, tobe applied by an approved

applicator of the manufacturer, as per the directions /

supervision of the engineers in charge, all complete. Includes

All Necessary Scaffolding Work upto Any Height.

25a 12.00 Wall Painting (two coats) with plastic emulsion / Oil paint of

approved brand and manufacture and of shade required on

undecorated wall surfaces to give an even shade, over and

including a priming coat with alkali resistance primer of

approved brand and manufacture after thoroughly brushing

the surface free from mortar droppings, and other foreign

matter and also including preparing the surface even and

sand -papered smooth 78.44 Sq.M.

b 12.00 Extra over above item for every subsequent coat of of wall

painting with plastic emulsion / Oil paint of approved brand.

c 12.00 Applying two coats of Birla (white cement based) or Asian

(acrylic lapy-putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth. 40.19 Sq.M.

26 Providing & Laying & Jointing glazed stoneware pipes incl.

excavation up to 2.0 mt.,refilling, trasporting the pipe to work

site, unloading, lowering in trenches, laying and jointing the

pipes in c.m. 1:1 incl. all jointing materials such as cement,

sand, hemp, bitumen as dire. testing the pipe line to a head

of 1.5 mt. and hydraulic test as dire incl. watering trenches,

spreading , and carting away of surplus earth within

mt.lead as dire. etc. comp.

a 50.00 23 cm dia. 344.64 Rmt

Providing & Laying & Jointing glazed stoneware pipes incl.

excavation up to 2.0 mt.,refilling, trasporting the pipe to work

site, unloading, lowering in trenches, laying and jointing the

pipes in c.m. 1:1 incl. all jointing materials such as cement,

sand, hemp, bitumen as dire. testing the pipe line to a head

of 1.5 mt. and hydraulic test as dire incl. watering trenches,

spreading , and carting away of surplus earth within

mt.lead as dire. etc. comp.

b 6.00 15 cm dia 211.05 Rmt

c 6.00 10 cm dia. 288.23 Rmt

27 4.00 Constructing brick masonry chamber for under ground C.I.

Inspection chamber and bends with bricks having croshing

strength not less than 35 Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Lightduty) 455mm x 610 mm intenal dimensions total

weight of cover with frame to be not less than 38 Kg. (Wt. of

cover 23Kg.) and Wt. of frame 15Kg.) (R.C.C.top slab with

1:2:4 mix (1-cement:2-coarse sand:4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15 mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455 mm x 610 mm and

up to 850 mm deep

28 a 2.00 Constructing Manhole with R.C.C. top slab in 1:2:4mix (1-

cement: 2-coarse sand:4-graded stone aggregate 20 mm

nominal size) foundation concrete 1:3:6 mix (1-cement:3-

coarse sand:6-Brick bats 40+50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement:5-coarse

sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement:2 -Coarse

sand:4-stone aggregate 20 mm nominal size) finished

smooth complete including curing and festing (i) Inside size

900mm x 1200mm and up to 1.5M. deep including C.I. cover

with frame size 560 mm diameter total weight of cover and

frame to be not less than 128kgs. (Wt. of cover 64Kg. and

Wt. of frame 64Kg.) (A) With 230 mm thick walls of brick

masonry using brick having crushing strength not less than

35Kg./Sq.cm. in Cement Mortar 1:5 (1-Cement: 5-Coarse

sand) (2)B type depth up to 1.50 Metre

29a 1.00 Providing and fixing white vitreous china flat back or wall

corner type lipped front urinal basin of 340x280x470 mm

sizes respectively with standard flush pipe, Waster Pipe,

Waste Coupling, PVc Connection and G.I clamps complete,

including painting of fittings and brackets, cutting and making

good the walls and floors wherever required : Cera Model

No. S4020103 or Equivalent 3259.32 No.

b 2.00 Providing and Fixing of C.P. Brass BIB Cock of 15 mm Dia

of Jaquar make florentine series model no. 5047n or

equivalent make with all necessary fittings. as approved by

Engineer - in - charge., 1564.17 No.

c 2.00 Providing and fixing brass screw down Angle stop tap.(A)

15mm dia. Of Jaquar make florentine series modelno. 5053n

or equivalent make with all necessary fittings. as approved

by Engineer - in - charge., 1160.57 No.

d 1.00 Providing and Fixing of C.P. Brass Two Way Bib Cock of

mm Dia of Jaquar make model no. 041kn or equivalent

make approved make with all necessary fittings. as approved

by Engineer - in - charge., 1411.58 No.

30 2.00 Provdg. & laying S.W. Gully trap with C.I. garting brick

masonry chamber & water tight C.I. cover with frame of

mm x 300 mm size ( inside) with standard weight. sqare

mouth trap size 150 x100 mm P trap 1234.57 No.

31 1000.00 Providing erecting and fixing double coated ISI water tank of

required capacity each with all necessary fittings and

connection etc. complete on terrace 3.91 Litre

32 10.00 Extra rate over item of excavation of earth for excavation of

asphalt pavement/RCC of thickness up to 0.20 meter

including demolishing the asphalt carpet, metal, soiling /

cutting Reinforcement etc.comp. with stacking the material

as directed.-up to 0.20 meter thickness

33 3.00 P/F PVC / C.I. (span) nahni trap and all of the following

nominal dia of self cleanising design with C.I.Screw down or

hinged greeting inclusive cost of cutting and making good the

walls and floors for drain 75 mm dia. etc. comp. 552.83 No.

34a Provdg. And fixing to wall, ceiling & floor in true line and level

UPVC pipe Schedule- 40 of make as approved by engg.

incharge. pipe shall be fix on wall with the help of clamp at

every twi meter center to center of shall be concealed as

directed in cluding neccesarry fitting etc. in cluding testing of

pipe and jointd and fixing the same with adhesive solvent

including cost of all materials of following nominal bore

iii 2.00 32 mm 117.97 Rmt

35 Provdg. And fixing to wall ,ceiling and floor 10.00 kg.

F/Sq.Cm2 working pressure polythelene pipes of the

following outside diameter, low, density, complete with

special flange compression type fittings, wall clips etc.

making good wall ceiling and floor.

b 5.00 75mm dia 274.68 Rmt

c 8.00 110 mm dia 332.91 Rmt

36 1.00 Providing and fixing white vitreous china extended wall

mounting water closet of Cera Make S1043101 Carat Model

Or Equivalent Model With EWC Soft Close Seat Cover, Chair

Bracket, nuts, bolts and gasket etc complete. 12292.6 No.

37a Providing and fixing chromium plated brass half trun flush

cock of approved quality including fixing in pipe line etc.

b 1.00 Providing and fixing Health Faucet of Jaquar make model

no. 573 or equivalent make as approved by engg. In charge

with flexible tube upto 1 metre long etc. complete. 1504.12 No.

38 1.00 Providing and fixing Under counter Wash basine including

mm C.P. Brass Pillar tap, 32 mm C.P. Brass Waste of

Standard make, Cutting & Making good the wall / granite

Wherever Required in White Color : Model S2030101 of

Cera Clair Series or Equivalent make Waash basine of size :

39a 1.00 Provdg. & fixing 600mm x 450 mm Bevelled edge mirror of

superior glass mounted of .6 mm th. A.C. sheet or plywood

sheet and fixed to wooden pluge with C.P. brass screws and

washers. 825.48 No.

40 1.00 Provdg. & fixing C.P..Brass towal rail complete with C.P.

brass brackets fixed to wooden plugs with C.P. Brass

screws.(600 mmx 20 mm size)

41 Providing and fixing ball valve (brass) of approved quality,

High or low pressure, with plastic floats complete :

ii 1.00 20 mm dia 1099.94 No.

iii 22.00 25 mm dia 1552.93 No.

iv 1.00 40 mm dia 3312.60 No.

42a Providing and fixing Full Way valve (HEX) with wheel of

approved quality :

i 1.00 15 mm Full Way valve (HEX) 1461.17 No.

ii 1.00 20 mm Full Way valve (HEX) 1924.61 No.

iii 8.00 25 mm Full Way valve (HEX) 2535.55 No.

iv 1.00 32 mm Full Way valve (HEX) 3377.64 No.

v 6.00 40 mm Full Way valve (HEX) 4661.10 No.

vi 1.00 50 mm Full Way valve (HEX) 6675.14 No.

43 10.00 Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc consisting of

following operations: 1150.48 Sq.M.

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm

of cement admixed with water proofing compound

conforming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls upto 300 mm

height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick

bats 25 mm to 115 mm size with 50% of cement mortar 1:5

(1 cement : 5 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by

Engineer-in-charge over 20 mm thick layer of cement mortar

of mix 1:5 (1 cement :5 coarse sand ) admixed with water

proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge to required slope and treating similarly

the adjoining walls upto 300 mm height including rounding of

junctions of walls and slabs.

(c) After two days of proper curing applying a second coat of

cement slurry using 2.75 kg/ sqm of cement admixed with

water proofing compound conforming to IS : 2645 and

approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless cement

mortar of mix 1:4 (1 cement :4 coarse sand) admixed with

water proofing compound conforming to IS : 2645 and

approved by Engineerin- charge

(e) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing and for final

test.“All above operations to be done in order and as directed

and specified by the Engineer-in-Charge :and shall be

guaranteed for minimum period of 10 years after handing

over the completed building by the main contractor to be

finished as directed. Stamp paper guarantee 10 years to be

furnished before receiving any payment from the client.

With average thickness of 120 mm and minimum thickness

at khurra as 65 mm.

44 10.00 Providing and laying broken chine mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be

laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed. 739.89 Sq. M.

45 4.00 Providing and laying Cement concrete flooring for I.P.S. 1:2:4

(for Indian Patent Stones) (1 cement: 2 coarse sand:

graded stone aggregate 20 mm. nominal size) lain in layer

finished with a floating coat of net cement- 50 mm th etc.

complete. 348.08 Sq.M.

46a 12000.00 Providing & Fixing M.S. Struture, grill, gate,stair / balcony

railing , elevation element of Decorative pattern with M.S.

Channel ,flat ,medium grade m.s. pipe, square or round bars

with round heanded bolts, nuts, or by screw. etc. comp.

47 300.00 Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly

cleaning, oil, grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand

paper with ready mixed priming paint brushing red lead.

48 300.00 Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to

give an even shade including cleaning the surface an even

shade including cleaning the surface of all dirt, dust and

other foreign matter. 86.94 Sqmt

49 10.00 Providing & Fixing 1 mm Thick S.S.-304 Grade 90 cm High

S.S. Railing having Hand Rail Member of 50 mm Dia., 3 No.

of Horizontal Pipe of 16 mm Dia. & Baluster Suppprt of

mm Dia. At Every Third Step as per Detail Given. Rate

Includes All Work Complete as per Description & as per

Direction of Engg. in Charge. 2270.21 R.Mtr.

50 1.00 Providing and fixing standared extruded of alluminium

section of size 63 mm x 38.10 mm x 1.2mm (Section:2434,

@ Wt.0.643Kg/mt ) with colour anodized alluminium frame

for ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation 1163.92 Sq. M.

51 1.00 Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm ( Section no:

@Wt 1.094 Kg / Rmt with colour anodized alluminium frame

with 5 mm thick transparent bronze colour tinted float glass

as details etc complete for Fix window.

52 Providing and fixing ISI marked 32 mm thick flush door

shutters conforming to IS : 2202 (Part I) decorative type, core

of block board construction with frame of 1st class hard wood

and well matched teak 3 ply veneering with vertical grains or

cross bands and face veneers on both faces of shutters with

1.00 mm thick Decorative Laminated Sheet on both faces of

shutters including ISI marked Stainless Steel butt hinges,

bright /matt finished 125 mm Stainless Steel handles of

approved quality & make, ISI marked oxidised M.S. door

latches of Size 300x20x6 mm conforming to IS:5930 with

necessary screws etc. complete as per direction of Engg.

a 3.00 Flush shutter with both side laminate 4332.15 Sq.M.

Providing wood work in frames of Doors, windows cleare

story windows and othersimilar works wrought, framede and

fixed in position. (A) Indian Teak Wood

54 2.00 Providing and Fixing FRP FRAME size 125 x 65 mm and

mm thick FRP shutter with wood grain raised pannel design

finish shutter having extra reinforcement on sides and edges

and in polish finish The core of the shutter is to be filled up

with injected fire extingushing grade.polyurethane foam done

in situ along with embedded wooden pieces for stiffering and

also for tacking hinges and fixtures. The whole FRP frame

and shutter is to be water proof.weather proof,tennite proof

and resistance to mild acid/ Alkali, Rates are to be inclusive

of S.S. hinges with necessary screws and brass fixtures and

55 Making connection to the ex.M.H.in running sewer incl.

Dewatering and other required machinery etc. of following

dia pipes at any convenient time. All damaged work shall be

well repaired as per instructions. etc..complete.

a 1.00 For Pipe 150 mm to 300 mm diameter 1339.29 No.

b 1.00 For Pipe 400 mm to 600 mm diameter 2232.14 No.

56 1.00 Making connection of galvanised Mild steel distribution

branch with galvanised mild steel main pipe upto 80mm

nominal bore by providing and fixing tee including cutting and

threading the pipes complete 600.08 No.

57a 350.00 Providing throating or plaster drip, grooves and moulding to

Wall , R.C.C. chajja and slab.

57b 20.00 Providing & Laying cement vatta 10 cm x 10 cm in size

quarter round in c.m. 1:1 ( 1 cement, 1 coarse sand) laid in

one layers finishing with a floating of neat cement watering

etc complete as dire. 23.45 Rmt

58 10.00 Carring out plinth treat ment to post construction/ existing

structure by spraying chemical solution for termite control

treatment including labour and material consist ment withI.S.I

specification. Using Chlordene and Chiorpur files 20EC. As

Per 6131_ paret- II Consentration Weight one percent is

recommended i.e one litre 20EC chemical emulsion with19

liter give1% concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical/ Sqm of

surface is recommended as per I.S

59 2.00 Carring out timber treatment to all wood work including

drilling holes and spraying oil based chemical solution on

surface of timber work for termite control including labour

and material etc. complete. Using Chlordene 20EC. As Per

6113_part III Consentration Weight 1.00 percent is

recommended one litre chemical emulsion dillute with 9 liter

of kerosene precent concentration. Total dillute

concrentration will be10litre inclusive of the litre chemical

emulsion application 0.75/Litre chemical per one Sqmt

printed two coat wood surface. 54.98 Smt

60 110.00 Paver Block Providing and laying shot blasted Non -

interlocking, Paver blocks of specified thickness, size, grade

of concrete and colour machine made and blasting by

automatic shot blasting machine and high density of as per

approved sample of approved make for footpath, parking

areas, service lanes,cross over and other areas as

mentioned in the drawing. Including providing and laying

mm thick averave bedding layer of coarse sand below paver

block as per required grading and specification. Laid paver

block shall be mechanically compacted. The work of the

paving blocks shall be executed in line and level by skilled

mason of flooring work only. Small size of paver block with

same specification shall be used at residue or at end. It

should be laid in such a way that the no cutting of the paver

block to be necessary. If cutting of paver block shall be

required , than cut by machine only and laying to be done by

skilled flooring mason. The finished surface of the paver

block shall have coarse sand Texture Finish. Pave blocks

shall be compacted and shall be re-laid if necessary. Actual

laid area shall be measured and paid without any wastage.

(A) 80 mm thick M-35 grade Grey Paver block of size

200mm x 200mm. As per approved rate

61 350.00 SProviding and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height and

15cm thick of M250 grade concret as per approved design

and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

complete. 358.06 R.mt.

62 Providing and Fixing Box type metal letters forming

composite box made from 1mm thick stainless steel plate of

grade 304 having brush finish of following font size to be

fixed at Main Gate in english and or Gujrati and including

fixing charges. etc. complete as per direction of Engg.

incharge. for Payment Purpose Height of Letter will be

a 120.00 Upto 300 mm Height 93.85 R. Inch

63 2.00 Providing and Fixing MURAL made out of 2mm thick s.s.

plate grade 304, including making necessary design as per

Architect dwg. Through laser cutting including connection to

the R.C.C./Masonary with necessary frame,anchor

fastnuts,M.S.Plate etc. complete as per direction of Engg.

incharge. 6804.07 Sq.mt.

64 250.00 Providing and Fixing Sinage - internal and external signage

boards with Vinyle Text on ACP sheet / 2 mm th. S.S. Plate

etc. complete as per direction of Engg. incharge.

65 2.00 Providing and fixing retro Reflective Hi Intensity Micro

Prismatic Grade Board using 2mm Aluminum / 4mm ACP,

angle iron 75 x 75 x 6mm. Descaling and degreasing the

board as per requirement using epoxy reflactive process by

screen painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with necessary

excavation curing etc. complete as per I.R.C. 67-2012

design. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for

the product offered shall be submitted by contractor.

(B)Class B Type-4(MDR/ODR) retro reflective sheeting

9250.89 Sq.mtr.

66a Providing and Fixing 6 mm thick Lexan Polycarbonate multi

wall roofing sheet fixed with hilti screw and rubber silicon

sealer and alluminium strip of size 50 x 3 mm etc complete

10.00 as directed by Engineer in charge 1427.62 Sq.mt.

b SITC of Tensile Gazebo structure

1 ) MS Structure : Supply, bending , Fabrication & erection of

structural steel sections & Plates in complete line & level as

per drawing with one coat of zinc chromate primer & two coat

of epoxy paint.

Hollow Sections : Asian / Apl Apollo

Plates : Main Make

Electrode : Noble / Mangalam / Sun arc

Primer & Colour : Asian / Berger / Nerolac

2 ) Architectural tensile fabric : Tensile Fabric will be done

with Serge Ferrari – 750 GSM make. Tensile Fabric

installation will be done with SS Turn Buckle, SS Corner

Plate, Aluminum Flat, Wire Rope & SDST screw.

90.00 Fabric warranty : 7 Years back to back as per company 4207.00 sqmt

67 Providing Making & Fixing Glow sign Board of suitable size

as per approved color-Designed Back Light Material fixed on

G.I. sheet Box of suitable size with concealed Light Fittings,

Necessary Scaffolding etc. complete as per direction of

3.00 Officer in charge. 2499.55 Sq.mt.

LANDSCAPING WORK :

1 950 LAYING OUT LAWN – After excavating soil upto 30 cm.

depth & removing unwanted stuff, stones etc. Preparing soil

for planting by supplying and mixing 6 inch river fine site and

0.5 cmt FYM maximum 100 sqmt of lawn area and doing

termicide @ 1 fit / 100 sqmt area and planting selection

type / approved lawn grass at maximum 6 cm x 6 cm

distance and maintain it upto 120 days. Maintainance include

all operations i.e. watering, grass cutting, gap filling, applying

of fertizer if require etc. 85.00 Sq.mt.

2 480 Supplying, Spreading and leveling of good earth like fertile

soil as directed etc compt.

3 60 Supplying, Spreading and leveling of good quality river Kaap

Filling 100 mm as directed etc comp.

4 1700 Supply and Planting saplings of Hedge plants like kadvi

mahendi, karmda, dyuranta, nikodeviya etc. specifies bag

size is 4 inch x 6 inch, well established & free from disease at

site. as per the instructions

5 100 Supply and Planting saplings of Ficus panda, Ficus

benjamina, Ficus benjamina variegated, Ficus longisland

bag size is 13 inch x 13 inch, well branched, well established 150.00 Nos

& free from disease at site as per the instructions

6 2000 Supply and Planting saplings of (Jasud, Ixora, Ticoma

Gaudi-chaudi, Gultora, Jetropha, Haemeliya, Chandani,

Mogaro, Galfemia, , Allamenda, Desi Gulab, Euphorbia mili,

Jasud Hybrid, Chandani double, Madhukamini, Madhumalti,

Ticoma Capensis, Ixora draft, Nikadevia, English Karen etc.) 35.00 Nos

having height of minimum 2.00 to 2.5 ft. and bag size is

inch x 10 inch, well branched, well established & free from

disease at site as per the instructions.

7 200 Supply and Planting saplings of Golden Bamboo having

height of minimum 5 to 6 ft. and bag size is 8 inch x 10 inch,

well branched, well established & free from disease at site as

per the instructions.

8 50 Supply and Planting saplings of Palm(Botal palm,foxtel)

having height of minimum 10.00 to 12.00 ft. and bag size is

21 inch x 21 inch, well branched, well established & free

from disease at site as per the instructions

9 40 Supply and Planting saplings of champa (deshi) having

height of minimum 8 to 10 ft. and bag size is 15 inch x

inch, well branched, well established & free from disease at

site as per the instructions.

10 100 Supply, Spreading and leveling of Brick dust (Chharu)

particle size having maximum 10 mm

11 150 Supply Saplings and Planting of trees species as specified

( Alstonia scholaris, Erythrina indica, Jacaranda

mimosifolia,Delonix regia , Anthocephalus cadamba,

Spathodea companulata,Neem (Azadirachta indica),

Lagerstromia speciosa , Tabebuia argentea, Cordia

sebestena, Mimusops elengi, Bauhinia blakeana, Kigelia

pinnata, Cassia fistula, Banyan, Ficus religiosa,

Peltophoroum, Bottle brush, Silver Oak, Billi, Mahagony,

Pendula, Desi Asopalav,Sevan, Badam, Ficus infectoria,

Pinkesiya, Millingtonia hotensis, Rain Tree, Bakm limdi,

kasid, Ashok tree, parkia, Tabebuia Rosea, millettia, etc.)

having height of minimum 7.00 to 8.0 ft. and bag size is

inch x 13 inch, well branched, well established & free from

disease at site as per the instructions.

Unit Rate Amount

I. No. Qty Items Per

Electrical Work Estimate

1.0 INTERNAL WIRING

1.1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade ZHFR/HRFR

PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

10 (f) with medium class Rigid PVC pipe and accessories erected 505.05 Pt

concealed in wall/ceiling complete

1.2 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade ZHFR/HRFR PVC

insulated multi strand copper wires up to 10 mtr length, in below type

of pipe erected with 6A Modular type switch and hum free EME four

or more step type electronic fan regulator with separately mounted

and accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

4 (f) with medium class Rigid PVC pipe and accessories erected 701.40 Pt

concealed in wall/ceiling complete

1.3 Point wiring for secondary light point with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand copper wires, in below type

of pipe to be erected complete with earth continuity and necessary

connection with primary light with accessories erected on Metal /

PVC / wooden box covered covered with appropriate front plate

modules erected on / in wall / ceiling for open / concealed wiring.

with necessary Lamp holder / ceiling rose / H.D.Connector as

directed.as per pipe erected with following type of accessories.

Note:- Maximum up to 6 mtrs length, excess will be considered

as Mains for Secondary Point.

4 (f) with medium class Rigid PVC pipe and accessories erected 174.30 Pt

concealed in wall/ceiling complete

1.4 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

1.4.1 5 [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from 530.25 Pt

nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

1.4.2 5 [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire 774.90 Pt

from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

1.4.3 1 [III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire 906.15 Pt

with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

1.5 4 Point wiring for on board Looped Plug with 6A Modular type switch 255 Pt

& 5 pin socket erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with following type

1.6 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade ZHFR/HRFR PVC insulated multi strand copper wires erected

in below type of pipe with 6A Modular type switches and following

type of accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or H.D.Connector as

1 (f) with medium class Rigid PVC pipe and accessories erected 627.90 Pt

concealed in wall/ceiling complete

1.7 Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with

necessary connections as per site situation directed by Engineer In

1.7.1 2 (1)One No. SP 6 Amp. 150 E.a.

1.7.2 2 (2) One No 5 pin plug 150 E.a.

1.7.3 5 (7) Blank Plate Single 25 E.a.

1.7.4 1 (9) 16 Amp. SP one way switch 179 E.a.

1.7.5 1 (10) 6/16Amp. Universal socket 198 E.a.

1.7.6 1 (13) 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch 307 E.a.

1.7.7 1 (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch 406 E.a.

1.8 Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in approved manner as

1.9 Providing & erecting PVC Corrugated Flexible Conduit with

required nos. of coupling, PVC bushes, Check-nuts etc. complete of

following sizes.

1.10 providing and erecting Mains with ISI marked electrolyte stranded

copper conductor, Non PVC Zero Halogen free fire retardant

insulated copper conductor, insulated wire (HRFR) conforms to IS-

694, erected in existing pipe with 1.5sq. mm copper conductor of

same specifications for earth continuity of following size.

In Existing medium class Rigid PVC pipe and accessories

1.10.1 40 (a) 2 wire 1.5 sq. mm 51 Mtr

1.10.2 60 (b) 2 wire 2.5 sq. mm 71 Mtr

1.10.3 10 (a) 2 wire 4 sq. mm 101 Mtr

1.10.4 30 (b) 2 wire 6 sq. mm 139 Mtr

1.11 providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.

1.11.1 5 (e) One wire 6.00 sq. mm 56 Mtr

1.11.2 30 (f) One wire 10.00 sq. mm 91 Mtr

1.12 Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.

1.12.1 150 e) 1.50 Sq.mm 3 core round PVC sheathed 46 Mtr

1.12.2 40 h) 2.50 Sq.mm 3 core round PVC sheathed 77 Mtr

1.12.3 10 k) 4.00Sq.mm 4 core round PVC sheathed 175 Mtr

1.13 Supplying & erecting M.S. Box having 16 Gauge painted with red

oxide or Heavy duty PVC box erected flushed on wall or concealed

in wall with necessary plastering & finishing as directed of following

SUB - TOTAL OF INTERNAL WIRING

2.0 Switchgears , Panels , MCBDBs & MCBs

2.1 Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

1 ICS=100% of ICU only 6112 No

2.2 10 Fabricating the box type items made from M.S. Sheet with A.I. 179 Kg

supports, wings, doors, handles other hardware materials as per

requirement design with finishing by three tank powder coating

processed inside and outside painted, erected as directed including

minor civil work. to install above MCCB.

2.3 providing and erecting Approved make Earth fault Relay suitable to

mount with inter connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal connections &

complete erected in existing M.S.housing..

2.4 Supplying & erecting approved make IP 55 grade Company

fabricated Timer Panel of following capacity for switch On-Off street

lights on time scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with hinged doors and

locking arrangement consisting of suitable size of 4 Pole MCB and

pole contactor (cat-III)with analog time switch, auto manual switch of

same make and suitable input and output Bakelite terminals and

with door earthing approved by Engineer in charge.

MCBDBs and MCBs

2.5 34 providing and erecting Miniature circuit breaker single pole 6A 111 E.a.

to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark

2.6 Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

2.7 Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

2.8 4 Sheets steel powder coated enclosure suitable for incorporating 175 E.a.

One/Two nos. MCB.

2.9 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

2.9.1 1 (i)4 way ( concealed manner ) 747.60 E.a.

2.9.3 2 (iii)8 way ( concealed manner ) 1369.20 E.a.

2.9.4 R.O. (iii)8 way 1141 E.a.

2.9.5 1 (iv)12 way ( concealed manner ) 1773.60 E.a.

2.9.7 (B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door

2.9.7b R.O. (i)4 way 2316 E.a.

2.9.8 Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar, isolated neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54

suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three

phase outgoing as per following .(The DBs should be used of same

company of MCB to be used)

1 (A)4 way outgoing 9925 E.a.

2.10 Providing & erecting 415 V MCB three Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

2.11 providing and erecting Approved make ELCBs / RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of quick action & tripping

with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed

2.12 Providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component for

following Max. rating erected as directed.

1 (ii) 40Amps. FP 2611 E.a.

2.13 3 Supplying & erecting bank of all polypropylene condenser (APP type) 690 KVAR

with standard capacity of 2,3,5,7, 10,12.5 & 15 KVAR units of P.F.

correction for operation on 3 phase 50 c/s, 400 /440V (+ / - 10%)

with externally discharging resistance, earthing terminal & built on

angle iron of channel iron frame work and provided with terminal

cover box. Complete erected on provided iron bracket or on floor

duly tested by license.

2.14 3 Providing and erecting metallic vitrified danger notice board as per 69 E.a.

language suggested by engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

2.15 3 Providing & erecting Medium Voltage Danger Notice Board 26 E.a.

sticker as per language suggested by engineer incharge of

standard size as per IS-2551

SUB - TOTAL OF Switchgears , Panel and MCBDBs.

Follow IS code :3043 is the guideline for the earthing

3.1 80 Providing and erecting required size HOT deep Galvanised iron 77 KG

strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board,

Motors etc. using proper clamp.

3.2 15 Providing and erecting required size Copper strip for earthing of 787 KG

H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using

3.3 5 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 787 KG

3.4 45 Providing and erecting HOT deep Galvanised iron strip wire 8 to 77 KG

3.5 Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should

be capable to retain moisture for long time Necessary test report

must be submitted.

3.5.1 4 (a) For Electrical Installation up to 440V in normal soil 4546 E.a.

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

3.5.2 1 (c) For Electrical Installation covering Transformer Neutrals, 8551 E.a.

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing in normal

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

3.6 2 Supply, installation,testing and commissioning of Chemical Earthing 12230 No

with UL Certified 17.2mm Dia. X 3000mm Long 254 Micron-Copper

bonded M.S. Rod manufactured as per IEC 62561-2 with 25Kg

Bentonite powder plus " U " bolt rod clamp complete with Lockable

high performence chamber suitable & tested for 5000T capacity with

SS Hardware.or equivalent

SUB - TOTAL OF Earthing

4.0 CABLES, Cable Termination and cable Trenches

4.1 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables

4.1.1 25 (a) 4 core 4 Sq. mm 116 Mtr

4.1.2 220 (b) 4 core 6 Sq. mm 125 Mtr

4.1.3 80 (c) 4 core 10 Sq. mm 139 Mtr

4.2 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

4.2.1 25 (A) 4 core 2.5 Sq. mm 269 Mtr

4.2.2 140 (B) 4 core 4 Sq. mm 361 Mtr

4.2.3 30 (C) 4 core 6 Sq. mm 505 Mtr

4.3 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road crossing

or floor of following size of cables.

30 (C) 4 core 10 Sq. mm 670 Mtr

4.4 280 Making trench in soft soil of suitable width of 90 cm deep for laying 55 Mtr

cable or locating the fault all over the run and back filling the same

and making the surface as normal ground.

4.5 45 Covering of cable with second class bricks or cement tiles laid cover 139 Mtr

the cable crosswise & also on both sides with covering of 7. 5 Cm.

layer of sand above & below cable (16 bricks per meter)

4.6 5 ( A )Making trench in Hard Murrum / Tar Road of suitable width of 90 74 Mtr

cm or required depth for laying any size of cable or locating the fault

all over the run and back filling the same and making the surface as

4.7 5 (B) If additional machinery like hammer driller or JCB use [Add] 354 Mtr

4.8 Drilling the road without breaking the road surface (Asphalt) for

laying of cable for feeding power supply by making up to following

size of holes at both ends complete.

4.8.1 5 (A) Up to 100 mm bore dia 488 Mtr

4.8.2 5 (B) Up to 150 mm bore dia 610 Mtr

4.9 Supplying following size of Light duty “A” Class G.I . Pipe &

erecting as directed by Engineer-in-charge.

10 (A) 25 mm dia 171 Mtr

4.10 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm.

below ground across the road crossing or on floor with necessary

material in an approved manner and making the ground as per

4.11 Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

4.11.1 50 (A)50 mm outer dia 62 Mtr

4.11.2 280 (B)63mm outer dia 73 Mtr

4.11.3 280 (C))90 mm outer dia 95 Mtr

4.11.4 10 (D)120 mm outer dia. 136 Mtr

4.12 Providing & laying approved make ISI marked Rigid PVC pipe

having 6Kg / cm2 (Class-3) to be erected at road crossing on or

floor as directed for laying of cable. The pipes as following size of dia

& weight per 6 mtr.

4.12.1 5 (D) 75 mm inner Dia. (5.5 Kg/6RMT) 124 Mtr

4.12.2 5 (F) 110 mm inner Dia. (11.63 Kg/6 RMT) 234 Mtr

4.13 Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

4.13.2 20 (b) 2 to 4 core 6 Sq. mm 38 E.a.

4.13.3 6 (c) 2 to 4 core 10 Sq. mm 38 E.a.

4.13.4 2 (d) 2 to 4 core 16 Sq. mm 47 E.a.

4.14 Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner.

4.15 Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

SUB - TOTAL OF Cables,Cable Terminations & Cable

5.0 Light Fixtures & Fans

Supply , Installation, testing and commissioning of pre-wired, LED

fitting/post top luminaries etc of all types, complete with all

accessories and tube etc. directly on ceiling/ wall, including

connection with 1.5 sq. mm FRLS PVC insulated, flexible, copper

conductor, single core cable with flexible conduits and coupler and

earthing etc. as required. Note:- The LED Light fixtures should

comply all international standards third party ( LM 79 for

complete fixture, LM 80 for individual LED ). The Manufacturer

/ Channel Partner of the Manufacturer has to submit 4- Years

unconditional free Replacement Guarantee for complete fixture.

5.1 Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency >

85 %( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

5.1.1 ( A ) Tube Light with integral / non integral driver

5.1.1 a 2 (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet 293 No

5.1.1 b 2 (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet 530 No

5.1.2 (B) LED Panel Light with provision for Plane front frame with

translucent cover fixed to housing complete.IP20

5.1.2a 2 (i)up to 8 Watts,4" x 4", Surge-2 KV 271 No

5.1.2b 4 (iii) 12-15 watts, 6" x 6", Surge-2 KV 462 No

5.1.2c 2 (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV 607 No

5.2 1 Providing & erecting Approved make Ceiling Fan with double ball 1963 No

bearing with Condenser 230 volt A.C.50 Hz. 900 mm sweep

complete having 3 Aluminium blades, canopy erected complete. [

Make shall be approved by Engineer in Charge]

5.3 1 Supplying and erecting approved make oscillating type medium duty 2329 No

bracket fan with Aluminium Blades A.C. 23OV. 50cy/s wall mounted

with height adjustment and rotary tilting device complete with guard,

mounting accessories kit, pull cord for speed and oscillation flexible

Core plug top complete erected with lead wires as directed.400MM

5.4 2 Supplying & erecting approved make low noise decorative exhaust 1686.44 No

fan having size 200mm with 1350 RPM with square frame ABS body

with inbuilt lowers & square frame.

5.5 2 Supplying & erecting fan hook box of 10 mm M.S. round bar 107 No

bounded to the RCC bars up to 50mm length each side and pierced

through a 16 Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary finishing.

5.6 2 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook 18 No

5.7 1 Supplying and erecting 19 / 20 mm. nominal bore Medium Class 107 Mtr

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing.

5.8 4 Providing and erecting PVC body surface or pendent mounting LED 780 No

Bulk type 9 watt Lighting Fitting with electronic driver. And lumen

output from luminaire 720lm , input voltage range 90-300VAC , 50Hz

cool white(3000 to 6500k), inbuilt driver, -20degC to +60degC

working temperature, AL frame with Beam Angle 120deg

SUB - TOTAL OF Light Fixtures & Fans

6.0 External lighting

Supply , Installation, testing and commissioning of pre-wired, LED

fitting /post top luminaries etc of all typesof external lights, complete

with all accessories and tube etc. directly on pole / pole bracket

including connection with 1.5 / 2.5 sq. mm FRLS PVC insulated,3

core flexible, copper conductor, with flexible conduits and coupler

and earthing etc. as required.

6.1 Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

6.1.1 (A) Street Light (IP-65), Surge protection -4KV /5000K integral and

10 kv non integral ,Light must have 440VAC line supply protection. It

should withstand 48 hours for 440VAC line supply.

8 (iii) Above 60 watts to 90 watts ( Required 72w ) 5917 No

6.1.2 (B) Flood Light (IP-65), Surge -4KV/5000K ,Light must have 440VAC

line supply protection. It should withstand 48 hours for 440VAC line

6.1.2.a 1 (c) Above 60 watts to 90 watts 6028 No

6.1.3 (C) Post Top Lantern Decorative LED fitting comprises of Copper

dust finish cast aluminum spigot and spun aluminum canopy fixed

with opal polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired upto terminal block.IP

15 (b)32-40W ( Required 40w ) 4772 No

6.2 Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having minimum glass

content 45.0%.The pole should be in one pieceand tapered round in

shape,having smooth outside surface finish and should be totally fre

from corrosion as well as non conductive and shock proof. Pole

should be provided with FRP/GRP base bracket dully fabricated from

metal(M.S) and dully claded with FRP/GRP material to avoid any

metal exposer and painted with PU paint.

Pole should mechanical properties i.e 1. Specfic gravity (ASTM D

792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight (ASTM D 2584)

45.0 ‐55.0%, 3. Water absorption (ASTM D 570) <0.5%, 4. Tensile

Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural strength (ASTM D

790) 250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638) 250 +/‐50MPa.

Pole should be flame retardant as per IS 6746.Resin used shall be

UV resistance and pigmented. Pole should be painted with first coat

of epoxy primer and then two coat of highly weather resistance

polyurethen paint to ensure proper addhesion of the paint.Minimum

thickness shall be 80 to 100 micron.Defelection of the pole shall not

exceed more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility features of poles

as per the standard ANSI C123.20 latest version of ASTM D 923/01

including cable termination box with necessory accessories.The size

of pole and type of installation with foundation , Anchor Base &

Internal junction box as per the manufacturer details and site

(3) 'B' class (Heavy Duty) frp/grp pole suitable for base plate

6.2.1 16 [B] Overall Length of 4.0 meter, Average thickness : 6mm, 10713 E.a.

Top/Bottom Outside Dia. 76/143mm +/‐2.Weight of Pole 15.4 Kg

approx. (Without base) Metal Anchor Base dully frp claded (Size :

290 Ø * 12mmthk , Mounting hole PCD 240mm * 4 nos. of 16 Ø

6.2.2 6 [D] Overall Length of 6.0 meter, Average thickness : 7mm, 16815 E.a.

Top/Bottom Outside Dia. 76/176mm +/‐2.Weight of Pole 25.0 Kg

approx. (Without base) Metal Anchor Base dully frp claded (Size :

340 Ø * 12mmthk , Mounting hole PCD 285mm * 6 nos. of 20 Ø

6.3 Providing FRP/GRP arm bracket of having 15˚ arm with 50 mm OD

pipe *5 mm thk,1000mm long from pole centre

6.3.1 6 (a) Single arm bracket 1882 No

6.3.2 1 (b) Double arm bracket 2390 No

6.4 4 Supplying & erecting sintex make SMC press moulded composite 472.00 No

FRP. loop-in, loop-out approx. 2mm thick box complete with bakelite

connector strip 4way & hinged doors having locking arrangements

with mounting clamp with nuts, bolts & washers suitable for erection

on wall ( c)150mm x 125mm x 100mm [deep].

6.5 8 Providing cement concrete.for foundation or for concrete filling in 5077.00 CU Mtr

1:2:4 ratio with 20 to 25 mm stone metal duly plastered with

necessary curing for pole muffing or any other purpose.

6.6 1 B' class galvanised iron pipe 32 mm outside dia 45 cms long duly 340 No

welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected

on wall or corner for mounting street light luminaire with necessary

hardware materials duly painted.

SUB - TOTAL OF External Lighting

7.1 1 Supplying & erecting approved make Automatic liquid level 2332 Job

controller 6A. with sensor testing as per instruction of Engineer in

charge on site complete with wiring connection with existing wires

with copper conductor from pump to upper and lower tank.

7.2 Supplying and erecting Flexible PVC insulated multistrand multicore

1.1 kv grade ISI marked copper wires of following size to be erected

90 e) 1.50 Sq.mm 3 core round PVC sheathed 46 Mtr

7.3 Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in approved manner as

7.4 1 Providing & erecting water cooler having storage capacity 150 Ltr. & 55340 No

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The

water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with necessary

inlet & outlet connection. The body of water cooler will be made from

Stainless Steel.

7.5 1 Supplying and erecting water filter cum purifier with ultra violate 5371 No

technology. (Aquaguard / waterdoc model or equivalent symphony/

crystal/videocon model)

7.6 Providing & erecting open well horizontal mono block pump set

with cast iron body, complete for three phase submersible motor

2 (D) 1 HP Three phase open well motor pump set suitable for 190 9175 No

LPM discharge @ 21 mtr. head, suitable for 32mm dia. delivery pipe.

7.7 Supplying & erecting approved make motor control cubical panel

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps for

R- Y - B phases, overload relay, Automatic water level controller,

Ammeter, Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay, start -

stop push buttons, to be erected on angle iron frame grouted on wall

as directed. The isolator, overload relay & contactors will be of L & T,

Siemens or BCH make only.

2 (a) DOL up to 5.0 H.P. 7646 No

7.8 1 Charges for doing liasioning work for obtaining the necessary 12711.86 No

clearances from the Electrical inspector / competent Authorities for

the total Electrical installation,co-ordinating with various agencies. All

necessary drawings, calculations, test certificates, etc. as required by

these authorities shall be prepared and furnished by the EPC

Vendor. Any modification/rectification as required by these

authorities shall be carried out by theEPC Vendor at free of cost. The

fees required to be paid to these authorities for inspection shall be

borne by Owner on production of documentary evidences.

SUB - TOTAL OF MISC. Work

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT- NORTH WEST ZONE

Name of Work : DEVELOPMENT OF SENIOR CITIZEN PARK AND YOGA CORNER AT F.P. 73, T.P.233

(TRAGAD) IN CHANDLODIYA WARD, NORTH WEST ZONE,AHMEDABAD.

FINANCIAL BID (Online Only)

Sr.No. Description Amount

1 Amount For Civil Work Rs.

2 Amount For Landscaping Work Rs.

3 Amount For Electrical Work Rs.

I/We am/are willing to carry out work at ______% above / below (should be written in figures and words)

the estimated cost mentioned above.

Estimated cost put to tender : Rs.80,09,323.49 Estimated cost put to tender : Rs.80,09,323.49

Add_____% above : Rs ___________ Deduct_____% below : Rs __________

In words : Rupees _______________________ In words : Rupees_____________________

Signature of contractor Additional City Engineer ( N.W.Z. )

Seal Ahmedabad Municipal Corporation