SPECIAL REPAIRS TO BLDG NO P 542 N BLOCK AT IMA DEHRADUN

Amount

Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down et using mechenical means and removal out side IMA premises complete as specified

M&L for Complete removal of existing treatment Scrapping of existing treatment on wall complete all as directed by Engr in Charge.

M&L for 5mm thick ready mix sand faced plaster on brick or concrete surfaces on ceiling, fascia roof projection etc as per manufacturers specification, surface finished even & fair, all complete upto the height of 7.5m as specified and directed Make : ACC (Surakhsa) /Ultratech(Readyplast)/Birla (Aerocom)/ Unicrete

M&L for 15mm thick Extranal ready mix sand faced cement plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, all complete upto the height of 7.5m as specified and directed Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom)/ Unicrete

M&L for 10mm Internal ready mix sand faced plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, all complete upto the height of 7.5m as specified and directed Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom)/ Unicrete

M&L Providing and applying 1.00mm thick acrylic water proof putty over plastered surfaces on wall to prepare the surface even and smooth as directed.

M&L for two coat of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note for Item No 105 to 107 above (a.) The work shall be executed from authorized applicator only through manufacturer of which the materials i.e. Putty,Primer and exterior emulsion etc. is proposed to be used by the contractor and as approved by Garrison Engineer. (b.) The contractor shall submit ‘Memorandum of Understanding’ (MOU) on manufacturer'S ORIGINAL Letter Head with only one manufacturer mentioned in the contract and submit for approval before execution of work Make :- Asian Paint/Berger paint/Dulex weather shield Nerolac

M&L for suitable primer on plastered and other surfaces surface on wall all as per manufacturers instructions and directed by Engineer-in-Charge.

M&L for two or more coat on new or old surface of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete all as per manufacturers instructions and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frame) area n.exc 1.5 Sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frame) area exceeding 1.5 Sqm but n.exc 4.00 Sqm complete all as specified and directed.

Taking down shutters of any description n exc 1Sqm each all as specified and directed by Engineer-in-Charge.

Taking down and easing shutters to ensure smooth closing / opening including tightening of hinges, adjustement of tower bolts, sliding bolt and refixing in same opening etc area not exc 1 Sqm each complete all as specified.

Taking down and easing of door shutters to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt and refixing in same opening etc area exc 1 Sqm but not exc 2 Sqm each complete all as specified.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F factory made 40mm thick 1st class H.W teak wood plain framed and arch shape on top paneled shutters (any number of decorative panels) with lock rail and panel of 12mm thick 1st class teak wood size of rail and stiles as per IS 1003 (part -I) kiln seasoned and chemical pressure treated complete all as specified and directed.

S & F factory made 40mm thick 1st class H.W teak wood decorative plain framed glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded ,fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with stiles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20 (b), complete all as specified and directed.

S & F Ist Class hard teak wood, Plain and semi circular at top chowkats & frame wrought rounded or chamfered put together with glue pinned atg joints and fixed complete all as specified and directed.

S&F 18 mm thick prelaminated colour WPC sheet for cabinet shutter and frame &fixed at site colour as approved by Engr-in- Charge complete all as specified.

S&F auto closing hinges 35mm of 0 crank (KH001) OR 8 CRANK (kh-002) openable at 110 degree for cabinet shutter fixed in repair complete all as specified. Make:- Haffle/ Hatich/Hexa

S&F Stainless steel handle 125mm size for cabinet shutter fixed in repair complete all as specified.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embededding hold fasts complete all as specified and directed.

S & F 3 mm thick sheet glass ordinary quality glazing in square nexc. 0.5 sqm in each pane fixed with wooden moulding all as specfied and directed.

M&L for french polishing on wooden surface of any discription width or girth including cleaning and preparing the surface including a coat of wood filler but one or more coat on new work complete all as specified and directed.

M&L for french polishing on wooden surface of any discription width or girth including cleaning and preparing the surface including a coat of wood filler but one or more coat on old work incl complete removal of exiting paint complete all as specified and directed.

S&F floor door stopper 140mm of brass body and tougue with hard steel spring complete all as specified.

S&F Ist class teak wood moulding Exc 6& n exc 13 Sq.cm in cornices rails and the like complete all as specified and directed.

S & F Fancy and decorative type 300mm long brass barrel, semi barrel and skeleton tower flush bolts type 2 and fixed flush complete all as specified and directed.

S & F Fancy and decorative type 150mm long brass barrel, semi barrel and skeleton tower flush bolts type 2 and fixed flush complete all as specified and directed.

S & F 150 mm butt hinges, cast brass with mild steel hing pin bright polished and fixed type B-11 complete all as specified and directed.

S&F 100 mm butt hinges, cast brass with mild steel hing pin bright polished and fixed type B-11 complete all as specified and directed.

S & F Fancy and decorative type 300mm long brass sliding door bolt with sand or die cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F Stainless steel gretting for nahani trap 100mm dia

S & F Fancy type and decorative 150mm log extruded brass handles fabricated type polished complete all as specified and directed.

Dismantling floor, hearth or wall tiling /kota/udaipur/ granite stone tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified

M&L for brick work using sub class "B" brick work straght or curvd on plan exc 6mtr mean radius built in cement mortar 1:4 (old size brick) including demolation of brick work and removal out side IMA premises complete all as specified and directed.

M & L for brick work in half brick thick wall using sub class "B' bricks in cement mortar (1:4) complete all as specified.

M&L for 25 mm thick cemant concrete type B-1 , 1:2:4 (using 20mm graded crushed stone aggregate) as in sub base of floor complete all as specified.

M & L for Vitrified glazed ceramic ( light shade), / designer tiles 8-9 mm thick (Square/rectangular ) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in same color tile grout to match the shade of tiles with & including screed bed or beading layer of morter 15mm thick in cement morter (1:6) for laying floor finishes all as specified and directed.

M & L for Vitrified glazed ceramic dark shade double charge designer tiles 8-9 mm thick (Square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and in same color tile grout to match the shade of tiles with & including screed bed or beading layer of morter 15mm thick in cement morter (1:6) for laying floor finishes all as specified and directed.

All as per item No. 40 above but on vertical surfaces such as dado, skirting etc over and including 10 mm thick cement plaster finished even and rough to receive tiles in Cement mortar (1:4) complete all as specified.

M&L for 7-8mm thick non skid ceramic coloured tiles area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm & 7 to 8 mm thick in floor set and jointed in neat cement slurry and pointed in same color tile grout to match the shade of tiles with & including screed bed or beading layer of morter 15mm thick in cement morter (1:6) for laying floor finishes , complete all as specified and directed.

M&L for coloured glazed disigner tiles of size 300x450x6 - 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in same color tile grout to match over and including 10mm thick rendering in cement mortar 1:4, all as specified and directed.

S&F stainless steel curtain rod, 25 mm dia,decorative including S S brackets, decorative finials at both ends complete all as specified Including dismantling of existing rod.etc.

M&L for Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth.

S&F medium grade steel water tubing, 15 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed.

S&F medium grade steel water tubing, 20 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed.

Demolition and breaking up drain pipes, PVC pipes ,CI pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

S & F Cast Iron Soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall 100 mm bore

S & F Stack clamps made out of 50 make mm x 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof 100 mm bore of pipe

S & F Cast Iron Branch pieces, single tee (equal or unequal), ordinary or inverted ( spigot or socket type) or with parallel branches 100 mm bore of pipe.

S&F in repairs Cast Iron cowl 100mm bore.

S&F in repairs PVC (SWR), junction single, (Single T) 110MM equal or unequal.

S & F in repairs Cast iron Nahani trap ditto 100mm.

S & F in repairs PVC (SWR) bend 110 mm any radius complete all as specified and directed.

S & F in repairs PVC (SWR) bend 75 mm any radius complete all as specified and directed directed.

M & L for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches ,or in floor fixed in repairs.

All as per item No. 57 above but 75 mm dia fixed on wall or floors

S & F in repairs vitreous China wash down water closet pan floor mounted single pice ( cascade) ceramic white including flushing cictren , plastic water closet seat , white colour pattren with flat bottom and cover complete all as specified and directed. Make:- Jaquar, Cera, Kajaria

S&F Vitreous china white Table Top Wash hand basin Size 170 x 450 x 450 mm ,one number brass CP waste coupling ,32mm dia , Pvc waste pipe with connector fixed in repair complete all as specified and directed . Make:- Jaquar, Cera, Kajaria

M&L for 16 - 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls and making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed Cement Mortar (1:6) 15 mm thick colour of granite as approved all as specified and directed by Engr-in-Charge.

M&L got Granite stone any decripition providing edges moulding to 16-18mm thick stone of counters vanities etc . Including machine polishing to edge to give high gloss finish etc .

S&F Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to counter top wash hand basin complete all as specified. Make:- Jaquar (Continental prima), Cera (Ruby), Kohler,Kajaria (Kerovit)

M&L at point of contact of wood work by chemical emulsion (in oil or kerosene based solution ) @ 0.5 ltrs /hole by drilling hole at dowanrard angle of 45 digree at 150mm centre to centre and sealing the same all as spfd and directed.

M&L treating of soil under existing floors using emulsion @ one liters per hole , 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse send ) to match the existing floors all as spfd and directed.

S&F PVC connection , reinforced 450mm long 15mm in size with brass check nut and PVC washers at both ends complete

S&F 15mm Angle stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe or for unions and fixed in repairs. Make:- Jaquar (Continental prima), Cera (Ruby), Kohler,Kajaria (Kerovit)

S&F Bib tap cast copper alloy , chromium plated suitable for 15mm bore iron pipe with long body fancy type with wall flange complete fixed in repairs. Make:- Jaquar (Continental prima), Cera (Ruby), Kohler,Kajaria (Kerovit)

S&F in repairs 15mm brass CP Mixer for mixing hot & cold water screwed dowan for iron pipe and fixed complete all as specified. Make:- Jaquar (Continental prima), Cera (Ruby), Kohler,Kajaria (Kerovit)

S&F brass chromium plated shower rose of 150 mm squre size, with or without swivel joints including fixing to steel pipe or union.fixed in repairs. Make:- Jaquar, Cera, Prayag

S&F brass chromimum plated Towel ring fixed with and including Chromium plated brasss screws and wooden / plastic cleats ( Minimum weight 90 gms) complete fixed in repair complete all as specified. Make:- Jaquar, Cera, Prayag

S&F Brass chhromium plated tubular Towel Rack with Lower Hanger (Stainless Steel) with hook fixed in repair. Make:- Jaquar, Cera, Prayag

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make:- Jaquar, Cera, Kajaria Kerovit.

S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed." all as specified and directed fixed in repair. Make:- Jaquar, Cera, Kajaria Kerovit.

S&F Soap dish stainless steel chromium plated fixed in repair with brass screws and rawl plug complete all as specified. Make:- Jaquar, Cera, Kajaria Kerovit.

S&F Sheet glass corner shelf of Chromium plated fixed with and incl of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railling 60cm long fixed in repair. with brass screws and rawl plug complete all as specified. Make:- Prayag, Cera, Jaquar

S & F in repairs for 0.75 mtr X 0.90 mtr bevelled edge looking mirror of any size 5.5mm thick fixed with plugs with chromium plated brass screw and cup washer complete all as specified

S&F 2000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

Demolition of cement concrete in ground floor and paving not exc 15Cm thickness (below or above ground level) and removing surplus spoil out of IMA premises complete all as specified and directed

M&L for 75 mm thick PCC (1:3:6) type C-1 (using 20mm crushed stone aggregate) as in plinth protection/ Path finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggt) as in sub base filling and mass concrete complete finished evenand fair all as specified and directed.

M & L for chequered heavy duty glossy finish cement tiles 30cm X 30cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement mixed with colour pigments complete all as spd. & directed. Make:- Sagar tiles/ Ferrocon/ Tulip tiles.

M & L for 20 mm thick scred bed or bedding layer of mortar in 1:6 for laying of flooring complete all as specified and directed.

Prepration of new steel surface of any description over 10cm width or girth and applying two coat of synthic enamel paint over a coat of red oxide primer complete all as spfd and directed.

S&F MS angle/TEE/Hollow/tubular section as in main and cross beams,hips,and jack rafter, purlins where connected to common rafters and etc. all as directed by engr- incharge confoming to Fe-410- W(Gde- E-250) quality- B. Make:- Tata Steel/ JSW Steel/ Jindal Steel.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/ridge/cladding to wall/Valley gutters to be fixed with self tapping screws all as specified. Make:- Tata Blue scope/ JSW Steel color on+/ Charminar

S&F pre-painted galvalume aluminium zinc coating GI based tile profile corrugated steeel sheet 0.50mm thick any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall fixed with self tapping screws as specified. all as specified. Make:- Tata Blue scope/ JSW Steel color on+/ Charminar

Providing & fixing false ceiling at all heights with RGR (Glass Fiber Reinforced Gypsum) false ciling tiles of Seze 595x595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225 :1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 00.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm , cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of szie 15x32mm of length 600mm to form grid module of size 600 x600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-In-Charge. with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. Make:- Gyproc,Armstrong,Diamond Ceiling

Construction of brick soak well 3.00 m dia and 5.00 m depth, excavation in soft/ loose soil for foundation in PCC 1:3:6 using 40 mm graded stone aggregate, honeycomb brick work in cement mortar 1:4, RCC 1:2:4 type B-1 as in slab, filling with brick bats including necessary earth work complete in repair and all as specified and shown on drg No. TD/309 Sheet 1/4 to 4/4.

M/S PUNDIR BUILDERS

Aggrawal Builders and Furnishers

M/S SURAT SINGH AND SONS

M/s RAM RATAN AND SONS

Arun Construction Co.

MOHAN LAL GUPTA

V S ENTERPRISES

Shree Durgai Construction Co.

M/s RK ENTERPRISES

M/S Manmohan Singh Anand