HIDCO/AGM(E)IV/FN/NIT132/25-26

O.HB-KITE.01.01 M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm)

Supplying 6 ply galvanised strand wire 19 gauge fitted and fixed complete with necessary eyes, hook and straining bolts (excluding the cost of straining bolts.)

Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete. (i) 10 mm. dia. (b) 200 mm.

Labour for fitting line of wire to posts, tightening by straining bolts and fixing the wire ( in taut condition) to the post with staples (including the cost of cutting and lapping joints in the wire, as necessary and including the cost of staples and straining bolts and also the labour for fixing the staples but excluding the cost of straining bolts) (Payment to be made on length of the individual line of wire) (c) Strand wire (3 to 7 ply) above 6 mm dia

Supplying and application of chemical for post Installed rebar connection by uslng ETA approved for seismic criteria In rebar connection, Including drilling hole to the required depth by rotary hammer drill, cleaning with brush & Jet of clean air, filling chemical uslng serrated nozzle to eliminate mixing error and in a voidless manner including charges for all tools & plants. Application to be designed for post-Installed rebars as per EC2/TR023 or relevant tested and accepted design guidelines and the design document to be furnished by the manufacturer. The chemical should have ETA approval for seismic criteria of rebar fixing which should be furnished by manufacturer. The installation and the setting instructions should be strictly followed as per manufacturer's specifications as approved by EIC prior to drilling along with post-installed rebar embedment design report. The existing concrete member should be scanned using rebar scanned to avoid hitting existing reinforcement in concrete during drilling. iii) Cost of post installed rebaring application with chemical as specified for 12 mm dia per cm of depth

Providing and Painting of structural steel surfaces of bridge members by grit blast cleaning or centrifugal blasting with a suitable abrasive materials like crushed slag in accordance with clause-III of IS 6586 : 1989 immediately before painting , to make the surface free from grease, oil, rust and other foreign materials. The rate includes supply of abrasives and, fuel, cost of paint including all transportation, lead, lift and labour charges, consumables, tools & plants complete in all respect but exclusive of cost for staging/scaffolding. Painting of approved Zinc-phosphate primer of DFT 65 micron followed by finish coat of Micaceous iron oxide pigmented drying oil type paint of DFT 75 micron.

Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. 7.50 metre height

Labour for shifting the scaffolding to one point to the another. Up to 7.50 m. High

Add CGST @9% of total amount to Rs.12,24,937.77

Add SGST @9% of total amount to Rs.12,24,937.77

Add Construction Cess @1% of total amount to Rs.12,24,937.77