SPECIAL REPAIR TO BUILDING NO DS 19 OF 433 I SUP PL ASC AT LANSDOWNE UNDER AGE I LANSDOWNE

Amount

Taking down Chowkats with shutter exceeding 1.5 Sqm . but n . Exc 4sqm each (Without taking off shutters from the frames). Complete all as specified and directed

Taking down chowkats with shutter n. exc 1.5 sqm each. (without taking of shutter from the frame) .Complete all as specified and directed

Taking down shutter of any description exc. 1 Sqm but n exc 2 sqm.Complete all as specified and directed

Taking down shutter of any description n. exc. 1 Sqm .Complete all as specified and directed

Providing and fixing windows & ventilators fabricated from Rolled Formed GI Section made of Galvanised steel colour coated(PPGI Sheets) (Base steel as per IS 513 ‘’D’’ quality. Galvanised as per IS 277 with Zinc of 90 Gsm/SqMt w. PAINT: Pre-Painted sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick.GI Section of 0.58mm thick in Double rebate windows in which both glazed shutter and flymesh shutter, 74 X 60mm outer frame , Mullion 72 x 49mm, Glazed shutter 48 x 22mm, Flymesh 41 x 22mm, Beading with round ends for Glass Fixing 12 x 12mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length metre joined with corner PolyVinylChloride brackets centre mullion fixed with PolyVinylChloride Mullion caps . Glass of 4mm thick plain float glass fitted with Ethylene Propylene Diamine Monomer in glazed shutter and wiremesh of Stainless steel of 36 guage to fix mesh in mesh shutter using VC Black Gypsum Drywall screws and Spoon profile of 0.58mm GI Sheet. Corners of the windows should be joined with corner brackets made of polyvinylchloride with crca of zinc phosphate coat.Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 in each, PolyVinylChloride handle 1 in each and Powder coated Peg stay in Glass shutter.Window shall be provided with Powder coated MS Grill/Guard Bars made of 10mm MS Sq Bar welded to 6 x 12mm MS Flat with countersunk holes at both vertical ends . Gap between the bars should not be more than 150mm . Window frames shall be fixed to brick / concrete masonry by using nylon self expension caps & 75/100 mm MS screws after drilling in walls. VC Black Gypsum Drywall screws should be used while fixng corner brackets,stay,hinges,mullion caps of windows. . Windows to be procured from any of the below mentioned companies- i)_Ashwani and sons, 1246/2 Meerut Road,Morta, Murad nagar-201003 ii)TATA Steel-Mumbai iii)Jindal,2-32,Gurgaon, Haryana-122001 iv) Ashish Industries, R-4/66, Raj Nagar, Ghaziabad , Ph-9891542779

M&L for Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165. Complete all as specified and directed

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.Complete all as specified and directed

S& F for 30mm thick, IInd class hard wood (SAL) plain, framed, panelled factory made shutters ( ISI Marked) (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed. Note:- Before procurement of door the contractor has to produce the sample of door(factory made) for approval and refernce

S& F for 40 mm thick, IInd class hard wood (SAL) plain, framed, panelled factory made shutters ( ISI Marked) (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed. Note:- Before procurement of door the contractor has to produce the sample of door(factory made) for approval and refernce

S & F 35 mm thick Second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.Complete all as specified and directed Note:- Before procurement of door the contractor has to produce the sample of door(factory made) for approval and refernce

M&L Second class hard wood plain, solid, straight chowkats (SAL) and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.Complete all as specified and directed by Engineer-in-charge

Resecuring or easing & adjusting without taking down shutter of any descriptio exc. 1 sqm but n exc 2 sqm. Complete all as specified and directed

Resecuring or easing & adjusting without taking down shutter of any descriptio n. exc. 1 sqm . Complete all as specified and directed

S&F, in repair, for Stainless steel wire cloth non megentic of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples. Complete all as specified and directed by Engineer in Charge .

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m. each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.Complete all as specified and directed

S&F for Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane.Complete all as specified and directed

S & F for Aluminium alloy anodised sliding door bolt, of 16 mm dia and size 250 mm (ISI Marked) , with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy.. Complete all as specified and directed

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section (ISI Marked) . Complete all as specified and directed

S&F Stainless non megnetic steel butt hinges of size 100mm.(ISI Marked). Complete all as specified and directed by Engineer in Charge

S&F Stainless non megnetic steel butt hinges of size 75 mm.(ISI Marked). Complete all as specified and directed by Engineer in Charge

S & F aluminium handle 150 mm long anodised, extruded type fixed (ISI Marked) . .Complete all as specified and directed

S & F aluminium handle 125 mm long anodised, cast type fixed (ISI Marked) . .Complete all as specified and directed

M & L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.Complete all as specified and directed

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint (Ordinary tint) .Complete all as specified and directed

M & L for preparation of New or previously untreated steel and iron surfaces of any description, over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide.Complete all as specified and directed

M & L for preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.Complete all as specified and directed

M & L for preparation of new or previously untreated steel and iron surfaces of any description, n. exc 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide..Complete all as specified and directed

Disconnecting existing tanks, setting side (or lowering if required) for repairs, cleaning and removing all scale and dirt etc. from tanks and mouths of circulating pipes etc. and hoisting if required reconnecting and refixing in position exc 250 Ltrs but n .exc 500 Ltrs capacity .Complete all as specified and directed

Dismantling water tanks exc 250 & n exc 500 capacity in litres and removing to store.Complete all as specified and directed

S&F Rotational moulded polyethylene water storage tank 500 liters capacity, double layer construction out door type ISI Marked (cylindrical vertical closed top), hoisted & fixed in position including tank cover with looking arrangment all fittings complete all as specified and as directed.

S&F in repairs 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) Complete all as specified and directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Stone concrete block or slab walls. Complete all as specified and directed

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15 mm dia .complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia .complete all as specified and directed.

S& F for GI tubing 15mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked) , fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed

S& F for GI tubing 20 mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked) , fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed

S&F in repairs Vitreous china Squatting pan (Ist quality) , 'Orissa pattern, white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor. Make : Jaquar Essco model Cat Part No ECS-WHT-451 or equivalent model of make MARC or Hindware . Complete all as specified and directed

S&F in repair Wash hand basin 555x410mm vitreous china (flat back type) incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings.Make : Jaquar Essco model Cat Part No ECS-WHT-801 or equivalent model of make MARC or Hindware complete all as specified and directed.

S&F in repair soap dish brass chromimum plated screw 125mm size complete all as spcified and directed Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repairs PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity of approved make .Complete all as specified and directed

S&F for PVC Connections 15mm size with PTMT nuts of length 600 mm (ISI Marked). complete all as specified and directed.

S&F in repair bib tap cast copper alloy with crutch or butter fly handle, screwed down for iron pipe 15 mm bore of tubing fancy type cromium plated (ISI Marked).Make : Jaquar Essco model Cat Part No MQT-512KN or equivalent model of make MARC or Hindware complete all as specified and directed. ( Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F Stop angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete (fixed in repairs) Make : Jaquar Essco model Cat Part No MQT-526KN or equivalent model of make MARC or Hindware .complete all as specified and directed.Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repair Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe screwed down for 15 mm dia bore GI pipe complete all as specified and directed Make : Jaquar Essco model Cat Part No MQT-508 KN or equivalent model of make MARC or Hindware ( Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repair, Stainless steel non megnatic Towel Rail 20 mm dia, 600 mm long fixed with and including Chromimum plated brass screws and wooden plastic cleats. Make : Jaquar Essco model Cat Part No AEC-1111N or equivalent model of make MARC or Hindware Complete all as specified and directed . Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring ( ISI Marked) joints fixed to walls.complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius with access door ( ISI Marked). complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) junction, single equal or unequal.complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) vent cowl ( ISI Marked) .complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring ( ISI Marked) joints fixed to walls.complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) bends any radius ( ISI Marked) .complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction, single equal or unequal ( ISI Marked) .complete all as specified and directed.

M & L in repairs 75 mm PVC (SWR) floor trap ( ISI Marked) , plain with grating including jointing with solvent cement.complete all as specified and directed.

Demolition of brick / stone work built in cement mortar including all quians, pillars etc. complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.

M & L for rendering 15mm thick in two layers i. e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufactrer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & fair complete all as specified and directed (Note : water proofing compound shall be measured separately) complete all as specified and directed.

M&L rendering 10 mm thick on internal surfaces of wall in cement mortar 1:6 finished even & smooth without using extra cement as specified and directed.

M&L rendering 5mm thick on fair faces of brick work or concrete sufaces in cm (1:4) as in ceilingcomplete all as specified and directed.

M & L preparing new plastered surfaces of walls and applying two coats of cement base paint. complete all as specified and directed.

M&L for preparation of newly plastered surface of internal wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The new surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper The cost of all material T&P and labour required for preparation of surface are deemed to be included in the rates quoted . (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I)

M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge . Note: (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I)

M & L Preparing new ceiling and applying three three coats of white wash complete as specified and as directed.

Demolition of cement concrete (reinforced) not exc. 15 cm thick or of any description & any position and not otherwise specifically provided for .and removing unserviceable material,outside of A 1 defence land complete all as specified and directed

M & L for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, inlcluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Engr-in-Charge

M&L for Pre fabricated factory made RCC manhole cover (RCC 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in man hole cover including necessary form work except slab set in CM 1:4 complete all as specified and directed.

Demolition concrete in situ in ground floors and paving n exc 15 cm thickness(below or above ground floor) or of any description & any position and not otherwise specifically provided for .and removing unserviceable material,outside of A 1 defence land complete all as specified and directed

M & L PCC Type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in surface channels and drains or benching in manholes complete including necessary form work. complete all as specified and directed.

M & L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

M&L cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cement including 4 mm thick glass dividing strip of figured glass, pin headed type, 73 mm wide inserted in position Complete all as specified and directed by Engineer in Charge .

Demolition and breaking up 150 mm internal dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar . complete all as specified and directed.

M&L 150 mm bore Salt-glazed stoneware drain pipes(ISI Marked ) laid in trenches and jointed as specified SGSW drain pipes laid in trenches.complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in concrete bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipes.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and and removing unserviceable material,outside of A 1 defence land complete all as specified and directed

M&L for Non- skid coloured coloured desginer ceramic tiles of any design and pattern, 400X400X7 to 8 mm thick, in floor etc incl 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles.Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects. Note:- Shade of the tiles including Colour, design and pattern shall be approved by GE .Complete all as specified and directed

M&L for Non- skid coloured ceramic tiles of any design and pattern, 300X300X7 to 8 mm thick, in floor etc incl 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles.Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects. Note:- Shade of the tiles including Colour, design and pattern shall be approved by GE .Complete all as specified and directed

M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8 mm thick, as in dado etc incl 10 mm thick rendering in CM 1:4, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles . Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects. Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I) .Complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed .

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ -150) as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as Specified & directed by GE/Eng-in-Charge.Make - Tata Durashine , JSW Colouron+ or equivalent in Roffit( Shiv Shakti Fibre Udyog)

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ- 150) as in ridges, hips, valleys/rain water / roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make - Tata Durashine , JSW Colouron+ or equivalent in Roffit( Shiv Shakti Fibre Udyog)

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Supply only liquid water proofing compound (ISI Marked)complete all as specified and directed.

S&F for 20 mm thick 2nd class hard wood(SAL) boarding planed one side with butt joints and fixed with nails as in roofs, ceiling partition fascia, barge soffit etc (except flooring and skirting) complete all as specified and directed

Supply & Fixied in repair ,tiled false ceiling of Everest tile (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gsm, both side inclusive and black painted groove on all T webs) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32mm made of 0.30mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20x0.40 mm and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width,including making good all the disturbed portion with existing surface with necesary arrangemnets of scaffolding all complete at all heights as per direction of Engineer-in-charge.

Dismantling and taking down U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified and directed. Note :- If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding.

Material & Labour for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with contineous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed PVC conduit ,duly concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and incl decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including white cover cover plate complete all as specified and directed. Note:- i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface shall be deemed to be included in quoted rates ii) If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding.

One light/fan/bell point controlled by one No piano type switch 5 Amps single pole one way

One 3 pin 5 Amps socket outlet on same board controlled by one, one way 5 Amps piano switch.

One socket outlet 5/3 pin 5 Amps controlled by one switch on independent board.

All as per item No 89 above but with 2.5 Sqmm PVC insulated FRLSH cable for 15 Amps power point.

Supply and fixing switch modular, one way 6 Amps, 1 module 240 volts, AC, ISI marked complete all as specified .

Supply and fixing switch modular one way 16 Amps, 1 module, 240 vlts, AC, ISI marked complete all as specified .

Supply and fixing modular socket, 6 A, 2/3 pin combined 2 module complete, ISI marked all as specified

Supply and fixing modular socket, 6 A/16 A 2/3 pin combined 2 module compelte ISI marked all as specified

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting ISI marked complete all as specified & directed Make : Anchor/ Cona / Havells

S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body ISI marked all as specified and directed Make : Anchor/ Cona / Havells

S&F bell push piano flush single pole one way 5/6 Amp all as specified and directed.Make : Anchor/ Cona / Havells

S&F bell ding dong elelctric 230V AC single pole all as speccified and directed Make : Anchor/ Cona / Havells

S&F MCB DB TPN 4 way with 200 amps 415 V rated copper busbar in sheet steel enclosure,double door type,complete all as specified and as directed. Make:- Legrand,Schneider,Siemens,L&T,

S&F MCB DB SPN 8 way with 200 amps 240 volts rated copper busbar in sheet steel enclosure.double door type complete all as specified and as directed. . Make:- Legrand,Schneider,Siemens,L&T,

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. Make:- Legrand,Schneider,Siemens,L&T,

Supply & fixing MCB, SPN, AC, 240 volts of 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. Make:- Legrand,Schneider,Siemens,L&T,

Supply & fixing MCB, TPN, AC, 415 volts of 63 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. Make:- Legrand,Schneider,Siemens,L&T

S&F LED tube light batten 20 Watt, 4ft, Polycarbonate housing, translucent diffuser, With LED Light Source, 2200 Lumens, natural White, Surge Protection range- 2KV, Voltage Protection range – 120 -280VAC, 2 years warranty , System efficacy not less than 110Lm/Watt for the fitting, power factor >0.95, total harmonic distortation<20%, Color rendering index >80, Coefficient Colour Temperature – 6500K, Fixed on site with all accessories all as specified & directed. Cat No: SZSLBMX020 of shakti Cat No,C&S LTTB4F20WLEDof C&S LM79 and LM 80 Reports to be produced. BIS Certification must.

S&F LED Bulb 10 Watt (Cool day light) housing made from polycarbonate, with opaque diffuser, having Colour temp 6500 K and lumen output 950, voltage range 120V-280V AC, power factor >0.9, THD <33% suitable for “B-22 type to fix on batten holder Make : Shakti/Havells/Wipro/C&S.

S&F in repair Wall Bracket light fitting (Bldg Security light) 20W housing made out of die cast aluminium alloy with tougned glass , IP 65 protection having clamp for mounting on building wall working on 240V AC 50 Hz , 20 Watts consisting of reflective lens, wired with appropriate driver PF>0.98 having over voltage protection up to 400 volts, surge protection level 7 - 10 KV, thermal short circuit protection THD<10%, made up of long life LED chips (SMD) in modular with Ra>70 and LED lumen efficiency >120 lumen Per watt, including fixed on wall with 02 Nos MS Clamps made of 40x6 mm FI and bracket made of 40 mm dia light grade GI Pipe bend to shape, not less than 1.2 m long including connecting with 02 single core PVC insulated copper conductor cable 1100 v grade size 1.5 sqmm complete. Make:-SZPCLPM020 of Shakti /LTESSG20WLED of C&S Note : Connection to luminaire shall be done in suitable PVC connector within the bracket/luminaire end and are inclusive in above.

S&F sub main wiring with two single core PVC insulated,unsheathed, stranded copper conductor cable 6 Sqmm with 6 Sqmm FRLSH PVC insulated, unsheathed, stranded copper conductor cable as earth wire in existing surface/recessed steel/PVC conduit and earth wire connected to common earth dolly all as specified & directed. Note: Three run of 6 sqmm cable shall be measured as one unit Make:- Havells,KEI,Universal,RPG,Gloster

Supplying, laying, commisioning and testing of 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 25 sqmm 3.5core complete all as specifed and directed. Note:- The Earth work,GI pipe Shall be measured and paid Sepretely under appropriate item of Sch A

Excavation in trenches in all type of soil not exc 1.5 m wide and not exceeding 1.5m in depth for laying UG cable/foundation etc complete all as specified and directed.

Returning filling in soft/disintegrated soil including spreading levelling watering and well ramming in layers n.exc 25cm each layer complete all as specified and directed.

Removal of excavated surplus soft/disintegrated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Material and Labour for sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and directed. (Note:- Punned thickness shall be considered for payment purpose.)

Supply and laying well burnt clay brick old size class 'B' laid dry flat for protection over the cable, width equal to the length of brick complete all as specified and directed.

Supplying, laying & jointing GI water tubing, 40 mm bore, light grade as in sleeving etc laid in trenches / pole post /under culvert/ under road for cable protection etc. complete all as specified and directed .

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by 4 mm GI wire as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items.

PIONEER REFRIGERATION AND ELECTRICALS

Panwar Electrical

M/S Balaji Builders

NAND KISHORE ANIL KUMAR