AUGMENTATION AND SITC OF SEWAGE PUMPING STATION WITH RELATED MECHANICAL, ELECTRICAL,INSTRUMENTATION AND CIVIL WORK WITH FIVE YEARS OF OPERATION & COMPREHENSIVE MAINTENANCE FOR SHAHIBAG SPS OF AHMEDABAD MUNICIPAL CORPORATION (AMC).

estimated cost, as mentioned above. Amount of my / our tender works out for Rs. ________________ (in figures)

Estimated amount put to tender Rs. Estimated amount put to tender Rs.

2) Lump Sum Amount Quoted for Buy Back Items (as per Annexure-I) in Scope of Work (Section A-3, A.3.8), Rs. _____________

Signature of Contractor

Company’s seal:

1. Bidder has to quote % Above (Premium) or % Below (Discount) or As par of total Job, Rs. 2,73,65,202/- (i.e. Total Estimated Project Cost w/o

buyback value) and has to carry out work at Ordered Value with any Excess -Less Qty. mentioned in above items as per site requirement and

instruction of Engineer-in-charge.

2. Bidder shall quote for buyback items as per Annexure-1 in Scope of Work, Section A-3(A.3.8) separately online at Sr.

as indicated above. Bidder to note that net amount quoted by the bidder shall be determined by deducting the total amount

as indicated above. Bidder to note that net amount quoted by the bidder shall be determined by deducting the total amount

of buyback quoted by bidder from the amount quoted for works as above at Sr. No. 1 and the net amount so derived shall

be considered for Price Evaluation purpose to determine lowest bid.

SUMMARY OF COST

Augmentation and SITC of Sewage Pumping station with Related Mechanical,

Electrical, Instrumentation and Civil Work with Five Years of Operation &

Comprehensive Maintenance For Shahibag SPS of Ahmedabad Municipal

Corporation (AMC).

SR. NO. ITEM DESCRIPTION AMOUNT

A MECHANICAL WORK

B. INSTRUMENTATION WORK

C ELECTRICAL WORK

E TOTAL OF CAPITAL COST (A + B + C + D)

F OPERATION & MAINTENANCE WORK

G TOOLS & TEST EQUIPMENTS

TENDER ESTIMATED AMOUNT WITH 5 YEARS OF O&M

( E + F + G ) (WITHOUT GST)

I BUY BACK AMOUNT IN RS. (AS PER ANNEXURE-I)

TOTAL AMOUNT AFTER DEDUCTION OF BUY BACK VALUE

TOTAL AMOUNT AFTER DEDUCTION OF BUY BACK VALUE

Augmentation and SITC of Sewage Pumping station with Related Mechanical, Electrical,

Instrumentation and Civil Work with Five Years of Operation & Comprehensive Maintenance

For Shahibag SPS of Ahmedabad Municipal Corporation (AMC).

MECHANICAL WORK

Sr. No. Item Qty. Unit Amount

SUBMERSIBLE NON-CLOG PUMP SET

Supply, Installation, Testing and

Commissioning (SITC) of Submersible NC

Pump-Motor set suitable for sewage

application with semi-open or enclosed or

suitable type Impeller & wear Rings in CF8M

with CI FG 260 Casing & casing cover, SS

shaft & with motor suitable for 3-Phase, 415 V,

50 Hz., AC induction Air filled dry type

submersible motor of mini. rating as specified

having max. 1500 RPM sync. speed, insulation

Class 'F' With temp. rise limited to class B and

IP-68 protection.

The scope shall include all required accessories

viz. automatic coupling device, SS- 304 heavy

duty & of suitable size double guide pipes of

length to suit the sump height with required

supports, SS-304 or suitable stainless steel

grade Chain with shackles (shall be with dual

hook / shackles of 100 mm or suitable higher

size at app. every 1.5m C-C distance) & of

length as per sump height + min. 3m,

Submersible Power & control cable (copper

flexible & stranded type conductor of reqd.

cores & size for each pump motor set) & length

of sump height + min. 5 m long each run with

necessary electrical termination connection at

junction box /starter panel and RCC foundation

blocks for auto coupling & delivery bend, PMU

etc. complete as per IS, Tender Drawings and

Specification and also including in scope any

other parts / accessories / fittings required to

complete the work in all respects & satisfactory

operation of pump set.

Pump Capacity :625 m3 / hr.

Motor Rating: min. 30 kW (or higher rating

as reco. by pump manufacturer)

1.1.2 SUBMERSIBLE NON-CLOG PUMP SET 1 Nos. 6,67,927.00

(For Store supply item as per above

Pump Capacity :625 m3 / hr.

Motor Rating: min. 30 kW (or higher rating

as reco. by pump manufacturer)

SUBMERSIBLE NON-CLOG PUMP SET

(For SITC item as Per Above Description.)

Pump Capacity :450 m3 / hr.

Motor Rating: min. 30 kW (or higher rating

as reco. by pump manufacturer)

2.1.1 VALVESSupply of Manually gear operated 2 Nos. 4,527.00

CI/DI Double Flanged, Sluice Valve

conforming to IS 14846 PN 1.0 with SS

seat rings and SS spindle with hot dipped

galvanised hardware's, bolts, nuts & washers,

gaskets, etc. as per data sheet.size : 100 mm NB

(Manually Operated On Header Drain valve)

2.1.2 Size : 300 mm NB (Delivery Pipe)(Pump Type- 4 Nos. 25,071.00

2.2.1 Installation, testing and commissioning 2 Nos. 439.00

Manually gear operated CI/DI Double

Flanged, Sluice Valve conforming to IS

size : 100 mm NB (Manually Operated On

Header Drain valve)

2.2.2 Size : 300 mm NB (Delivery Pipe)(Pump Type- 4 Nos. 1,141.00

2.3.1 Supply, Installation, Testing and 4 Nos. 37,587.00

Commissioning of CI/DI Double flanged Non

Return Valve conforming to IS 5312-Part-2,

PN 1.6 having swing check, Single door design

with dead weight arrangement for nonslam

having CI door, SS hinge as per IS with all

stainless steel hardware and gaskets, etc. as per

specification of following sizes:.

Size : 300 mm NB ( Delivery Side) (Pump

2.4.1 SITC of CI/DI Tempor proof Flanged Air 2 Nos. 16,758.00

Valve with Isolation Sluice Valve as per IS

14845 PN-1.0 & IS-14846 PN-1.0 respectively

with SS304 float, gun metal nozzle, complete

hardware's, bolts, nuts & washers, gaskets etc.

including all taxes, Insurance, Transportation,

freight charges, Inspection charges, loading,

unloading, conveyance to departmental stores,

stacking, security etc. as per IS and

Size: 100 mm NB - Pn 1.0 (On Each Header

2.5.1 Supply, installation, testing and commissioning 1 Nos. 36,403.00

of Menual Gear operated CI/DI Non-Rising

Spindle DF Butterfly Valve, conforming to IS

13095 / BS EN 593, PN 1.0 with SS

renewable seat rings , indicator, gear box with

bolts, nuts & washers, gaskets, etc. as per

specifications.

Size: 450 mm NB (On Header Pipe For Pump

2.5.2 Size: 350 mm NB (On Header Pipe For Pump 1 Nos. 30,144.00

3.1.1 C.I. PIPES & SPECIALS 2954 kg 58.00

Manufacture, Supply and delivery of CI flange

ended Pipes complete as per IS 1536 /

Class B or its latest revision for various dia

meter and classes The delivery of pipes to be

made to Pump house/site including all taxes

loading carting, unloading, stacking, insurance,

octroi, inspection charges etc. complete as per

IS and as per specifications.

Size : 200 mm Dia Above

3.1.2 Labour Charge of CI flange ended Pipes 2954 kg 11.00

complete as per IS 1536 / 1537, Class B or its

latest revision for various dia meter and classes

The delivery of pipes to be made to Pump

house/site including all taxes , loading carting,

unloading, stacking, insurance, octroi,

inspection charges etc. complete as per IS and

as per specifications.

Size : 200 mm Dia Above

3.2.1 CI FITTING & SPECIALS 2500 kg 58.00

Supply of suction, delivery , header , testing

and commistioning of Flanged CI fittings and

specials like 90 deg, bend, Blind Flanges,

Reducer/ Expander, Duck Foot Bend, TEE etc,

conforming to IS 1538 and complete in all

Size : 200 mm NB and Above

3.2.2 Labour Charge of suction, delivery , header , 2500 kg 11.00

testing and commistioning of Flanged CI

fittings and specials like 90 deg, bend, Blind

Flanges, Reducer/ Expander, Duck Foot Bend,

TEE etc, conforming to IS 1538 and complete

in all respect. Size

: 200 mm NB and Above

4.1.1 Supply, installation, testing and commissioning 4 Nos. 10,200.00

of double flanged Expansion Bellows

confirming to EJMA/IS standard with PN

rating & all necessary St.St. hardware's.

Size : 300 mm x 300 mm ( L ) (For Delivery

side of Pump Type-1 & 2 )

4.1.2 Size : 450 mm x 300 mm ( L ) (For Pump 1 Nos. 18,780.00

Type-1 Header Line)

4.1.3 Size : 350 mm x 300 mm ( L ) (For Pump 1 Nos. 12,840.00

Type-2 Header Line)

4.2.1 Flanged Joints of Pipes, Fittings and 4 Nos. 477.00

Supply, Installation, Making of Flanged Pipes

as per IS 1538 , Fittings and Specials Joints

with all jointing materials, rubber packing, nut

bolts, labour etc.for complete connection.

Size : 100 mm dia

4.2.2 Size : 300 mm dia 6 Nos. 1,223.00

4.2.3 Size: 350 mm dia 12 Nos. 1,442.00

4.2.4 Size : 450 mm dia 20 Nos. 2,131.00

5.1.1 MS PIPES & SPECIALS 5 RMT 3,106.00

Supply, Gas cutting of pipe, Fabrication,

welding, Installation, testing and

commissioning of MS pipe & Specials,

reducer, expander, Y-Joint, Tee, Band etc.

conforming to IS 3589 & flanges confirming to

IS 6392-PN-1.0, fabricated from MS. plate

with necessary supports & anchoring. Pipe

fabricated from MS plate. (Excluding supply of

Size : 300 mm NB X 5.6 mm Thk

5.1.2 Size : 350 mm NB X 5.6 mm Thk 5 RMT 3,416.00

5.1.3 Size: 450 mm NB X 6.3 mm Thk 20 RMT 4,948.00

5.2.1 Providing epoxy coating to inside pipe line 3 Sq.m 332.00

with two parts of Solvent free high build liquid

epoxy lining as per AWWA C210-07 Suitable

for potable water application & shall be

approved by CFTRI- India/BS 6920-

UK/international standard /NSF/ANSI/-61

2004 to be fit for contact with potable water for

human consumption with 406 micron

thickness. inclusive of necessary materials

labour ,Equipment ,Contractor's overhead

charges and profit and including all taxes.

Size : 300 mm NB X 5.6 mm Thk

5.2.2 Size : 350 mm NB X 5.6 mm Thk 4 Sq.m 332.00

5.2.3 Size: 450 mm NB X 6.3 mm Thk 19 Sq.m 332.00

5.3.1 Supply and installation of MS Blind flange 1 Nos. 4,214.00

conforming to IS- 1538 with gaskets, hardware

and required accessories as per specifications.

Size : 350 mm (Blind) - On Main Header end

5.3.2 Size : 450 mm (Blind) - On Main Header end 1 Nos. 6,566.00

For Pump Type-1

5.3.3 Supply, welding , Installation, testing & 35 Nos. 3,931.00

commissioning of MS flat machnied faced

flanges confirming to IS 6392 & drilled to IS -

1538 with drilling off center bolt holes and

flange thickness as per PN 1.0 including cutting

Size : 300 mm NB (Drilled)

5.3.4 Size : 350 mm NB (Drilled) 20 Nos. 5,061.00

5.3.5 Size : 450 mm NB (Drilled) 20 Nos. 7,001.00

6.1.1 Supplying & Fixing SMC Chequered plate 20 Sq. 4,493.00

having 10 mm thickness, made out of SMC Mtr.

Confirming to IS 13410 & by Hot press

Compression Moulding technique Suitable cut

& fixed with MS Angle Frame to Fit Trench

Widths as per site requirement approved by

engineer in-charge.

Provide as per Actual Site Requirements.

7.1.1 G.I. PIPES & FITTINGS: 10 RMT 735.00

Supply, installation, connection with

equipments as required, testing and

commissioning of GI pipe conforming to IS-

1239 , Medium Duty with coupling, tee, bend,

union, elbow, flanges , etc as all required

fittings for connection complete with gaskets,

hardware, and required accessories as per IS &

Size : 100 mm NB

8.1.1 PORTABLE DEWATERING PUMP 1 Nos. 1,46,348.00

Supply and testing of Submersible Non Clog

Portable Dewatering Pumpset with C.I. casing

& CF8M impeller, 25 m flexible PVC hose

pipe of pump delivery size, rated for 6.0 kg /

cm2 presure, 15 mtr SS lifting chain, 20m pair

of cable for motor

to starter panel, suitable for 3Phase, 415 V,

Hz AC supply and min. motor rating as

indicated here below, Switch-Starter panel with

PMU suitable inter lock for winding protection,

moisture controller for fault detection and auto

with buit-in level switch for dry run protection

and auto stop facility, 20 m suitable size power

supply cable to starter panel, GI/CI pump stool

and other required accessories for wet well.

Capacity : 25 m3 / hr.

Motor Rating: Mini. 3 HP (or higher rating

as reco. by pump manufacturer)

9.1.1 MONORAIL EOT WITH ELECTRIC 2 Nos. 2,36,256.50

CHAIN HOISTSupply, installation, testing &

commissioning of Electrically Operated Chain

Hoist & Electrically operated Trolley, suitable

to operate on Mono Rail Girder having

motorised motion, manufactured as per

IS:6547-1972-Class-II & IS-3177- Class-II,

complete with brake, chain-gear, motors, safety

device, pendant push button, starter panel,

cables from motor to starter panel and all other

required accessories like limit switches, power

supply system (Fastoon cable type), fasteners,

epoxy painting, etc. tested for over load as per

IS and as per specifications, complete in all

respect.Capacity : min. 2.0 Ton. Min. (For SCF

Pump )Lift : 16.00 m as mini. or as per site

req.Bay Length : 10 m (w/o MONORAIL

GIRDER & MS supporting structure)Note:

Minimum as specified capacity or higher as per

requirement such that EOT with ECH capacity

is min.1.25 times of the pump /motor OR single

heaviest component to be lifted within pump

10.1.1 Providing and Supplying at site of work with 2500 kg 72.91

M.S. anchor bolts, channels, angles,

chequered plates, all other type of inserts,

ladder, ISMB etc. in concrete members during

concreting as per instructions in all positions

and at any level including keeping them in

correct position and alignment, including

adjustment of reinforcement and shuttering,

etc. complete and including two coats of

approved oil paint over one coat of zinc-rich

primer over exposed surfaces of above

mentioned inserts after embedment, etc. all

as specified."Providing and Supplying at site of

work with M.S. anchor bolts, channels,

angles, chequered plates , all other type of

inserts, ladder, ISMB etc. in concrete members

during concreting as per instructions in all

positions and at any level including keeping

them in correct position and alignment,

including adjustment of reinforcement and

shuttering, etc. complete and including two

coats of approved oil paint over one coat of

zinc-rich primer over exposed surfaces of

above mentioned inserts after embedment,

etc. all as specified. (min. 250 mm I-Beam

gireder for Vertical & Horinzontal column, for

Monorail etc. as required to complete the work

in all respects & satisfactory operation of

Manual Chain Hoist)

For Construction of monorail girder for

Fixed Electric Hoist And Monorail EOT

with electrical Chain Hoist With all required

accessories and hardware and as per

instruction given by Engineer In-Charge.

10.1.2 Labor Charges for lowering,laying,fixing with 2500 Kg 11.36

fabrication at site with M.S. anchor bolts,

channels, angles, chequered plates, all other

type of inserts, ladder, ISMB etc. in concrete

members during concreting as per instructions

in all positions and at any level including

keeping them in correct position and alignment,

including adjustment of reinforcement and

shuttering, etc. complete and including two

coats of approved oil paint over one coat of

zinc-rich primer over exposed surfaces of

above mentioned inserts after embedment,

etc. all as specified. (min. 250 mm I-Beam

gireder for Vertical & Horinzontal column, for

Monorail etc. as required to complete the work

in all respects & satisfactory operation of

Manual Chain Hoist)

For Construction of monorail girder for

Fixed Electric Hoist And Monorail EOT

with electrical Chain Hoist With all required

accessories and hardware and as per

instruction given by Engineer In-Charge.

11.1.1 Construction of Shed :1.80 mm FRP sheet 30 Sq. Mtr 216.10

used for Construction of Shed for Sump and

shad size should be as per instruction given by

Engineer In-Charge.

12.1.1 Providing, Supply of Structure Steel at site of 2000 Kg 64.83

work with freight, loading, unloading carting,

etc. including all taxes and duties complete

such as joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered

(below 10mm thickness) for cable trench etc.

required for support structure of all Electro-

mechanical equipment, piping, etc. for support

on floor / wall / beam / brackets etc. as per

12.1.2 Labour Charges for lowering, laying, Fixing 2000 Kg 11.37

with fabrication various size section of MS

such as joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates,n Chequered

plates, for cable trench etc Complete with two

coats of red oxide and two coats of approved

colour shade of epoxy paint as per relevant IS

and as per specification.

13.1.1 DISMANTALING OF PUMP-MOTOR 1 Job 30,000.00

Dismantling of existing All HNC Pump-

Motor set, NC-SCF Pump etc. coveringwith

Plastic and packing with all required

accessories and the bidder has to Carryout

dismantled Items as per the Buyback sheet or

store to the AMC Store / Site or As Per

Instruction Given by the Engineer In-Charge.

13.1.2 DISMANTALING OF MECHANICAL 1 Job 30,000.00

Dismantling of existing Reducers,

Expanders, Expansion bellows, All Tyep

Valves, chain Pully Block, DPCV

coveringwith Plastic and packing with all

required accessories and the bidder has to

Carryout dismantled Items as per the Buyback

sheet or store to the AMC Store / Site or As Per

Instruction Given by the Engineer In-Charge.

13.1.3 DISMANTLING OF ELECTRICAL 1 Job 30,000.00

Dismantling of all existing All Type Cubical

Panel, APFC Panel, Cables, Cable Trays,

and all Accessories of Exsiting Pump House

coveringwith Plastic and packing with all

required accessories and the bidder has to

Carryout dismantled Items as per the Buyback

sheet or Store to the AMC Store / Site or As Per

Instruction Given by the Engineer In-Charge.

Reconnect Existing PLC / SCADA Panel of

Pump House to New PMMC Panel and putting

in Satisfactorily Working Condition as petr

instruction given by the Engineer In-Charge

(As Applicable).

TOTAL ESIMATE OF MECHANICAL WORK (W/O GST)

Name Augmentation and SITC of Sewage Pumping station with Related Mechanical, Electrical,

Of Instrumentation and Civil Work with Five Years of Operation & Comprehensive Maintenance For

Work Shahibag SPS of Ahmedabad Municipal Corporation (AMC).

INSTRUMENTATION WORK

Sr. No. Items Qty. Unit Amount

1.1.1 PRESSURE MEASURMENT SYSTEM 4 Nos. 1,412.00

Supply, installation, testing & commissioning of Bourden

type Pressure Guage glycerene filled having 150 mm dial

with necessary fittings / accessories (Manifold valve,

nipples, etc. shall be in SS 316 only) as per specifications

& complete in all respects.

(On delivery of each Pump).

Range : 0 - 6 kg / sq.cm.

1.1.2 Supply, installation, testing and commissioning of 2 Nos. 29,147.00

Pressure Transmitter along with, manifold valve,

required fittings, tubing (all valves, fittings, tubings, etc.

shall be in SS 316 only) all accessories, hardware, etc.

complete in all respects as per specifications and having

following measurement ranges:

Range : 0 - 6 Kg/cm2 (On Main Header)

2.1.1 LEVEL MEASURING SYSTEM FOR SUMP 2 Nos. 1,89,175.00

Supply, installation, testing and commissioning of Non-

Contact Radar Type Level Transmitter with 20 meter cable

along with Process Indicator for Local Display (local

mounted process indicator shall be 2 wire supported) in WP

enclosure with signal retransmission, required length of

power and signal cable from ICP cubicle, gland,

termination, required accessories, hardware, consumables,

mounting stand, etc. complete in all respects and as per

specification etc. and having following measurement

ranges for Sewage application:

Meas. Range: up to 20 m (at sump)

The scope also includes providing 4" flanged puddle pipe

approximate 300 mm long including fixing of the same in

existing civil structure slab of Sump for mounting of sensor

.The work also include all necessary work like make hole,

repair / modification in existing slab, etc.

2.1.2 Supply, installation, testing and commissioning of Float 2 Nos. 12,802.00

type Level Switch along with 15 mtr. Cable and WP

Junction Box (at Upstream of Manual Screen for high level

alarm and wet well for Dry run Protection of Pump)

complete in all respects and as per specification.The scope

also includes providing 4" flanged , puddle pipe

approximate 300 mm long including

fixing of the same in existing civil structure slabe of pump

house for mounting of level switch.The work also include

all necessary work like make hole, repair / modificationin

existing slab, etc.

Meas. Range: upto 10 m

2.1.3 Supply, installation, testing & commissioning of Float & 2 Nos. 17,718.00

Board type level indicator along with all accessories,

hardware, etc. complete in all respects as per specifications

and having following measurement ranges:

Meas. Range: up to 15 m (as per Existing Sump)

3.1.1 ELECTRO MAGNETIC FLOW METER 1 Nos. 2,26,181.00

Supply, installation, testing and commissioning of remote

type Full Bore Electromagnetic flow meter comprising of

IP-68 Sensor, IP-65/66 remote transmitter with 10m cable

between sensor and transmitter,Panel mounted flow

indicator cum Totalizer along with all mounting

accessories, hardware, etc. complete in all respect and as

per specs and shall have following size and measurement

range. The scope also includes necessary connection with

header pipe.Meter

Pipe size: 450 mm

Pipe Material : C.I. / M.S.

3.1.2 As per Above Item Specification. 1 Nos. 1,85,900.00

Meter Size: 350 mm

Pipe size: 350 mm

Pipe Material: C.I. / M.S.

3.2.1 PLC BASED INSTRUMENT CONTROL PANEL 1 Lot. 9,03,000.00

Supply, Installation, Testing & Commissioning of PLC

Based Instrument control Panel with 10" Color Touch

Screen HMI, 4G or Latest GPRS modem for remote data

transmission in future to Central SCADA of AMC,

Communication with MFM at PMCC Panel, Ethernet

Switch etc., Multiplication relay for Dry run protection of

pump, etc. Instrument Control Panel '(PLC Enclosure /

Panel ) with necessary PLC based logic and wiring , Min

nos. flow indicator/totalizer, Min. 1 no. process Indicator,

Min 2 no. analog signal multiplier, Min. 1 kVA UPS (with

30 min backup alongwith filter for harmonic, suitable rating

SMF batteries alongwith battery charger, cabling between

UPS and battery and all other accessories as per standard),

etc. complete in all respects and as per specs PLC having

minimum I/O count of 48DI / 24DO / 4AI / 0AO.

All work shall be carried out complete in all respects and as

per tender specification.

Note: PLC Scada Panel should be hook-up to Existing

Central Scada Panel and all work shall be carried out

complete in all respects and as per tender specification.

3.2.2 Necessary modification /provision in existing Central 1 Lot 50,000.00

SCADA System at Central Control Room of AMC to

monitor and control SPS from Central Control Room.

The Scope shall include acqusition of data of SPS , graphics

development, Data mapping, Alarm management, logic

development, Storage and Screen development, etc for

monitoring and control from existing Central SCADA shall

be carried out by sucessfull bidder or existing SCADA

contractor / Vendor and if it is carried outby the existing

SCADA contractor the required charges as per this item

shall be paid by successfull bidder of SP to Existing Central

SCADA Contractor.

Client/ AMC shall provide necessary support to bidder for

access in existing Central SCADA for necessary

modification & development as described above.

4.1.1 INSTRUMENT CABLE & ACCESSORIES 200 MTR 147.00

Supply, Laying, Installation, Connection, Termination,

Testing & Commissioning of Instrument Cables, along with

cable glands, lugs, cable trays, required junction boxes,

fittings and accessores as per specs.The unit rate shall

includea. Supply, loading & unloading of the cable at site

from store.B. Shifitng of cable from site store to place of

installation.c. Fixing of cable clamps, brackets, supports,

route markers etc. where ever required to fix the cables

safely.d. Excavation, back filling and levelling of ground

alongwith laying of fine sand, protection bricks and other

necessary civil material for laying cables outside the

building.e Testing and submission of sketches & reports of

all the cables laid.

POWER CABLE-3C x 1.5sq.mm.

Cable Length is Approx. Provide as per Actual Site

4.1.2 CONTROL CABLE 200 MTR 128.00

Cable Length is Approx. Provide as per Actual Site

4.1.3 SIGNAL CABLE 200 MTR 150.00

Cable Length is Approx. Provide as per Actual Site

4.2.1 INSTRUMENT CABLE TRAY 100 MTR 302.00

GI Perorated type cable tray shall be made out of galvanized

MS sheets of 2.0 mm thickness with required asccessories .

All material shall be Hot dip galvanised (816 g/m2) as per

IS 2629 as mentioned in specification and tray hardware

shall be in GI.

50 x 50 mm - Perforated type

Cable Length is Approx. Provide as per Actual Site

4.3.1 CABLE END TERMINATION AND CONNECTION 10 Nos. 151.00

'Supply, fixing, connection, testing and commissioning of

double compression brass cable glands and crimping type

Bimetalic lugs / sockets with necessary tools and

equipments as specified in specifications and IS complete

in all respects. The glands and lugs / sockets shall be

suitable for cable size and type mentioned above. The job

also includes earthing the glands and armour of the cable

with common earth bar or flexible copper mesh as

4.3.2 CONTROL CABLE 10 Nos. 143.00

4.3.3 SIGNAL CABLE 10 Nos. 135.00

5.1.1 EARTHING 2 Nos. 7,797.00

SITC of standard plate type earthing system conforming to

IS:3043 with latest amendment for various electrical

equipments and systems as per IS. 'SITC of 600 x 600 x

3.15mm Copper. Plate type Earth Pit etc. complete in all

respects.Earthing system shall be complete with following

job as a minimum:1)Excavation in hard murram.2) Supply

of copper plateelectode. 3) Supply & fixing of watering

pipe, funnel, clamp etc.4)Supply of civil material and

preperation of brick masonry earth pit chamber with C.I.

frame and covers of suitable size etc. 5)Supply and

providing of charcoal and salt for filling in earth pit. 6)

Supply of tools and tackles necessary for excavation to a

desired depth and doing necessary civil work etc. 7) Testing

earth resistivity before earthing and earth electrode

resistance after completion of work. 8) Supply and fixing

of Equipotential bar with housing alongwith necessary

mounting accessories. 9) Supply and labour charges for

interconnecting the earthing stations to respective

equipments, in built up trenches, cable tray, walls / ceiling,

buried in ground etc. complete with required size of

earthing strip/wire. 10) Supply of earthing clamp, saddle

5.1.2 SITC and labour charges for interconnecting the earthing 20 Kg 787.00

stations to respective equipments with fixing accessories

like earthing clamp, saddle etc. in built up trenches, cable

tray, walls / ceiling, buried in ground etc complete with:

25 x 3 Copper strips

TOTAL ESTIMATE OF INSTRUMENTATION WORK (W/O GST)

Name Augmentation and SITC of Sewage Pumping station with Related Mechanical, Electrical,

Of Instrumentation and Civil Work with Five Years of Operation & Comprehensive Maintenance

Work For Shahibag SPS of Ahmedabad Municipal Corporation (AMC).

ELECTRICAL WORK

Sr. No. Item Qty. Unit Amount

1.1.1 ELECTRICAL WORK 1 Lot 51,303.00

TPN MCCB (For LT Service Obtaining

SITC of 320 A TPN microprocessor MCCB (50kA)

with O/L, S/C & E/F protection with Extended rotary

handle, Terminal spreader, Auxiliary change over&

Trip contact, with Outdoor Enclosure with canopy

2mm thick , Single/double door & Wall mounted/

stand mounted as per site requirement (with incoming

& outgoing cable entry at bottom )with Cable end

boxes with RYB indicating lamp, Digital voltmeter,

VSS, ON,OFF & Trip indicating lamp etc as per

Power supply company requirements & location.

Including all civil works for fixing of panel on wall.

(Wall mounted at Location as per PSC req.)

1.2.1 MEDIUM VOLTAGE PANEL BOARD 1 Lot 9,99,600.00

SITC of PMCC Panel (50kA), compartmentalized,

Stand mounted, operating height maximum

1800/1900 mm, Extensible on both ends, suitable for

Manual & Auto operation - Local & through

PLC/SCADA operation as per site conditions

complete in all respects as per Tender SLD /

Specification / IS and including following as

(1) One no. Incoming feeder FP 320A

Microprocessor MCCB (50kA), LSIG for I/c with

Digital Voltmeter, Voltmeter selector switch, Digital

Ammeter, Ammeter selector switch, Digital PF

meter, MFM with RS-485 of Class-0.5, Indicating

lamps R,Y,B,On,off,Trip, 3nos. 320A/5A, Cl.-0.5

metering CT, CL 0.5 CT for APFC relay etc.

Constant voltage/control voltage transformer

1500VA, 415V/230V AC, with tapping +/-5% in

steps of 2.5%, 16A DP MCB.

(2) 320A TPN Main Aluminium busbars. (main

busbars size with current density 0.8A/Sq.mm)

(3) 4 Nos (3W+1S) Star-Delta starter for min.

kW Motor or higher as per pump Manufacturer reco.

with 125A TPN MP MCCB with Adjustable O/L &

Adjustable S/C Protection, (95A, 95A, 50A) AC3

duty Contactors (3 Nos.), O/L relay, Star-Delta

Timer, MFM with RS-485 CL.0.5, Resin Cast CT

Cl:0.5, MPR with RS-485,PMU, CBCT, SPP, Auto-

Manual, Local-Remote Selector Switch, on, off, trip

Indicating lamps & ON, Push Buttons for S/D Starter

& LCS for Pump- MOV Actuator with Indication &

push button etc.

(4) One nos. 125 A TPN Microprocessor MCCB

feeder for APFC Panel.

(5) Four nos.63A TPN MCCB feeders (for PDB -

Auxiliary accessories load & 2 Nos Monorail EOT

With Electrical Chain hoist & Spare).

(6) Two nos. 32A TPN MCCB spare feeder.

(7) One no. Outdoor lighting LDB feeder with

32ATPN 'C' curve MCB with 32A contactor & Time

(8) 6 nos. 32A 'C' curve MCB feeders (for Indoor and

Outdoor LDB, 4 nos. spare feeders).

(9) 3 nos. 16A DP MCB feeders (for 3 Spare.)

(10) 3nos. 320A/5A, Cl.-0.5 Metering CT.

(11) 1 nos. 320A/5A, Cl.-1.CT for 1nos. APFC Panel.

(12) 2nos. Multiplication relay for dry run protection

2.1.1 SITC of 80 kVAR APFC Panel complete in all 1 Lot. 1,88,070.00

respects as per SLD / Specification / IS and including

following as minimum:

(1) 125A TPN Microprocessor MCCB I/C.

(2) 10 Steps Microprocessor APFC Relay with

sensitivity 10mA.

(3)2 no. 20kVAR capacitor bank with 40A 'D' curve

MCB & 20kVAR Capacitor duty contactor with

(4) 2 nos. 10kVAR capacitor bank with 20 A 'D'

curve MCB & 10kVAR Capacitor duty contactor

(5) 3 no. 5 kVAR capacitor bank with 16 A 'D' curve

MCB & 5 kVAR Capacitor duty contactor with timer.

(6) 2 nos. 2 kVAR capacitor bank with 10 A 'D' curve

MCB & 2 kVAR Capacitor duty contactor with timer.

(7) 1 no. 1 kVAR capacitor bank with 10 A 'D' curve

MCB & 1 kVAR Capacitor duty contactor with timer.

(8)All capacitors shall be Gas Filled type with

dielectric losses ≤ 0.2w/kVAR. (Suitable for 0.95 or

better Correction).

3.1.1 SITC of Lighting Distribution Board (LDB) as 2 Nos. 6,502.00

3 Phase 4 Wire TPN, 6 way Prewired LDB (One each

for Indoor & Outdoor Lighting) Suitable to house :

Incoming: 32A FP, ELMCB (30mA)

Outgoing: 20A SP MCB 'C' curve (9 nos.) & 16A SP

MCB 'C' curve (9 nos.)

(At Panel Room)

3.1.2 SITC of Power Distribution Board (PDB) : 1 Nos. 9,051.00

3 Phase 4 Wire TPN, 8 way Prewired MOV-PDB for

Actuator of valves power supply (For MOV Pump

delivery valves, valve at Header & spare):

Incoming: 63A TPN, MCB 'C' Curve

Outgoing: 6 nos. 32A TP MCB 'C' Curve

3.2.1 SITC of stand / wall mounting type MS Junction Box, 4 Nos 2,050.00

minimum 2.5mm thick, with detachable cable gland

plate of 3mm thick, duly powder coated, with

earthing terminals, steel structure stand for mounting

of JB, etc. for Jointing/Termination suitable for

kV Submersible Flexible Copper Power cable with

Aluminium/ Copper armoured power cable from

MCC . Scope shall include providing suitable rating

AL busbars, Support insulators, Crimping type

lugs,nuts,bolts,washers etc. complete in all respects

as instructed by E.I.C. Drawing shall be got approved

before SITC of the same. Lugs of cables shall not be

connected directly. (Structure steel for Stand shall be

measured separately)JB of minimum Size: 300mm x

300mm x 100mm or higher as required. or higher as

required (for Each Pump Type-2)

3.2.2 SITC of stand / wall mounting type MS Junction Box, 4 Nos 2,050.00

minimum 2.5mm thick, with detachable cable gland

plate of 3mm thick, duly powder coated, with

earthing terminals, steel structure stand for mounting

of JB, etc. for Joining/Termination suitable for 1.1 kV

Submersible Flexible Control Cables of Submersible

pump with control cable from MCC. Scope shall

include providing Terminal connectors for

connecting control cable, copper lugs, etc. complete

in all respects as instructed by E.I.C. 20%

additional/spare Terminal connector shall be

provided. Drawing shall be got approved before

SITC of the same. SMC/FRP/Bakelite separator shall

be provided between Power cable section & Control

cable section. Lugs of cables shall not be connected

directly (Structure steel for Stand shall be measured

JB of minimum Size: 300mm x 300mm x 100mm or

higher as required. or higher as required (for Each

3.3.1 LOCAL CONTROL STATION 5 Nos. 2,800.00

SITC of Pendant type ON_OFF LCS with

pushbutton set complete with Enclosure, necessary

mounting/ fixing arrangement on wall / pipe support

etc. to be installed near motors for remote operation,

etc. as per IS and specifications. (including structural

steel) (For Each Pumps)

3.3.2 SITC of Local Control Station with pendant type 5 Nos. 4,500.00

Open_Stop_Close pushbutton set and with Open,

Close, Trip & Local / Remote Indicating Lamps

complete with Enclouser, necessary mounting/ fixing

arrangement on wall / pipe support etc. to be installed

near motors for remote operation, etc. as per IS and

specifications (including structural steel)

(For Delievery Valve Actuator of Each Pumps &

4.1.1 LOW VOLTAGE (LT) CABLES 100 Mtr 504.00

Supply and unloading & delivery at site, storage &

security at site of 1.1 kV, A2XFY/2XWY XLPE

insulated (IS 7098) / PVC insulated (IS 1554) AL /

Cu conductor cables as per specification & IS. The

cable when laid outside the building shall be laid

underground in excavated trench, as per specified

method and shall be laid in prepared trench on cable

tray when laid inside the building.

3.5C x 150 sq. mm. A2XFY Cable (1Runs for PSB

Cable Length is Approx. Provide as per Actual

Site Requirements.

4.1.2 3.5C x 50 sq. mm. A2XFY Cable (1 Runs for each 30 Mtr 211.00

Cable Length is Approx. Provide as per Actual

Site Requirements.

4.1.3 3C x 35 sq. mm. A2XFY Cable (2 Runs for each 30 400 Mtr 144.00

kWPump Motor (or higher as per pump manufacturer

Cable Length is Approx. Provide as per Actual

Site Requirements.

4.1.4 4C x 6 sq. mm. A2XFY Cable (For WR-DB with 200 Mtr 78.00

TPN MCB at Sump & Pump House, Outdoor LDB,

Indoor LDB, 1nos. MOVPDB)

Cable Length is Approx. Provide as per Actual

Site Requirements.

4.1.5 4C x 4 sq. mm. 2XWY/2XFY Cable (Motor Heater, 300 Mtr 141.00

motor pushbutton, 2nos. Portable Pumps,Monorail

EOT with chain Hoist.)

Cable Length is Approx. Provide as per Actual

Site Requirements.

4.1.6 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For 1 no. 400 Mtr 81.00

TPN MCB for Monorail EOT with Electric Chain

Hoist at Pump House, 1 TPN MCB at PMCC room

& Pump house maintenance floor & Pump House

floor, Motor Operated Valves)

Cable Length is Approx. Provide as per Actual

Site Requirements.

4.1.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each 400 Mtr 177.00

Motor space heater(as required, for 1 nos. APFC CT

& X'mer marshaling box Single Phase Supply, for

Cable Length is Approx. Provide as per Actual

Site Requirements.

4.1.8 5C x 1.5 sq. mm. 2XWY/2XFY Cable (For 2 Nos. 100 Mtr 130.00

Portable Pump LCS )Cable Length is Approx.

Provide as per Actual Site Requirements.

4.1.9 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For Each 300 Mtr 115.00

Motor LCS with Ameter. )

Cable Length is Approx. Provide as per Actual

Site Requirements.

4.1.10 12C x 1.5 sq.mm. 2XWY/2XFY Cable (For Actuator 500 Mtr 393.00

LCS of Each Pump and 2 nos.Header, 2 nos. PMU)

Cable Length is Approx. Provide as per Actual

Site Requirements.

4.1.11 10Tride x 1.0 sq.mm. individual triad and overall 300 Mtr 460.00

shielded with aluminum mylar tape Signal Cable for

RTD & BTD of motor (1Run Motor to S/S Panel)

4.2.1 CABLE END TERMINATION AND 2 Nos. 512.00

SITC of Double compression Weather proof type Ni-

Plated brass cable glands and crimping type

Bimetalic lugs / sockets with necessary tools and

equipments as specified in specifications and IS.

The glands and lugs / sockets shall be suitable for

cable size and type mentioned below & as per

specificaitons.

1) Earthing the glands and armouring with earthing

clamp and jumper and also connecting to common

2) The job also includes, if necessary, supply & fixing

of extension busbar of same material on MCCB or

panel board terminal / connector to connect more than

one no. of parallel cables or to connect higher size

cable to lower size unit. The job also includes

earthing the glands and armour of the cable with

common earth bar or flexible copper mesh.(Cable

termination qty. shall be as per site

3.5C x 150 sq. mm. A2XFY Cable (1 Runs for PSB

4.2.2 3.5C x 50 sq. mm. A2XFY Cable (1 Runs for each 2 Nos. 260.00

4.2.3 3C x 35 sq. mm. A2XFY Cable (2 Runs for each 30 8 Nos. 219.00

kW Pump Motor (or higher as per pump

manufacturer reco. )

4.2.4 4C x 6 sq. mm. A2XFY Cable (For WR-DB with 20 Nos. 111.00

TPN MCB at Sump & Pump House, Outdoor LDB,

Indoor LDB, 1nos. MOVPDB)

4.2.5 4C x 4 sq. mm. 2XWY/2XFY Cable (Motor Heater, 20 Nos. 111.00

2nos. Portable Pumps, Monorail EOT with Chain

4.2.6 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For 1 no. TPN 9 Nos. 77.00

MCB for Monorail EOT with Electric Chain Hoist at

Pump House,TPN MCB at PMCC room & Pump

house maintenance floor & Pump House floor, Motor

Operated Valves)

4.2.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each. 16 Nos. 75.00

Motor space heater(as required, for 2nos. APFC CT

& X'mer marshaling box Single Phase Supply, for

4.2.8 5C x 1.5 sq. mm. 2XWY/2XFY Cable (For 2 Nos. 4 Nos. 150.00

Portable Pump-Motor LCS )

4.2.9 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For Each 10 Nos. 75.00

Motor LCS with Ameter. )

4.2.10 12C x 1.5 sq.mm. 2XWY/2XFY Cable (For Actuator 14 Nos. 105.00

LCS of Each Pump and Header, 2 nos. PMU)

4.2.11 10Tride x 1.0 sq.mm. individual triad and overall 10 Nos. 185.00

shielded with aluminum mylar tape Signal Cable for

RTD & BTD of motor (1Run Motor to S/S Panel)

5.1.1 CABLE TRAY 50 Mtr. 456.00

SITC of GI ladder type cable trays with side channels

of size - 75 x 15 x 15 mm/ 100 x 15 x 15 mm & rungs

of size - 35 x15 x 15 mm spaced at 250 mm apart,

fabricated from 2 mm thick sheet steel in standard

length of 2.5 meter, duly hot dipped galvanized after

fabrication as per IS 2629- 1989/ IS 4759-1984

including accessories such as coupler plates/ fish

plates, bends, tees, reducers, elbows, covers and

electro- galvanized hardware etc, erected on existing

support as per specification and instruction of

engineer in charge.300 x 100 mm - Ladder type

(Cable Tray Length is Approx. Provide as per Actual

Site Requirements.)

5.1.2 150 x 100 mm - Ladder type (Cable Tray Length is 50 Mtr. 402.00

Approx. Provide as per Actual Site Requirements.)

5.2.1 Supply & laying GI perforated type cable trays 50 Mtr. 296.00

with returned edge/ flange, fabricated from 2.0 mm

thk sheet steel in the standard length of 2.5 mtrs, duly

hot dipped galvanized after fabrication as per IS

2629-1989 / IS 4759-1984 including accessories such

as coupler plates/ fish plates, bends, tees, reducers,

elbows, covers and electro-galvanized hardware etc,

erected on existing support as per specification and

instruction of engineer in charge.

150 x 35 mm x 2.0 mm thick

5.2.2 100 x 35 mm x 2.0 mm thick 50 Mtr 228.00

5.3.1 Supply, laying and erection of 120 mm approved 50 Mtr 136.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground /

road surface for enclosing cable and back filling the

same to make ground as per original.

(DWC Length is Approx. Provide as per Actual

Site Requirements.)

5.3.2 Supply, laying and erection of 90 mm approved 50 Mtr 95.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground /

road surface for enclosing cable and back filling the

same to make ground as per original.

(DWC Length is Approx. Provide as per Actual

Site Requirements.)

5.3.3 Supply, laying and erection of 50 mm approved 100 Mtr 62.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground /

road surface for enclosing cable and back filling the

same to make ground as per original.

(DWC Length is Approx. Provide as per Actual

Site Requirements.)

6.1.1 CHEMICAL EARTHING SYSTEM 8 Nos 7,025.00

SITC of chemical earthing with earthpit of minimum

bore size dia. 225mm Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS-

3043:1987 made of corrosion free G.I. Pipes having

Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising or copper coated solid steel road

/ flat strip type connection terminal 14mm dia with

constant ohmic value surrounded by highly

conductive corrosion resistant chemical compound

with high charge dissipation suitable for electrical

installation of 440V of 2Mtr. length of Pipe with one

no. 25Kg. bag of Back filling compound..

( 2 Nos of PMCC and APFC & Each Nos. Motor)

6.1.2 SITC of 50mm(w) x 6mm(T) etc. sizes as required, 250 Kg 77.00

HOT deep GI Strip including supply & fixing using

GI spacers, saddles when laid inside the building and

inclusive of excavation & refilling of earth when laid

outside the building & interconnection with earth pit

& all electro-mechanical equipments.

(50X6 G.I Strip wt.2.3 kg/m, 2.3x 100 Mt.=250kg.)

(PMCC & APFC Panel etc.)

6.1.3 Supply, laying and erection of 25mm(w) x 3mm(T) 60 Kg 77.00

etc. sizes as required, HOT deep GI Strip including

supply & fixing using GI spacers, saddles when laid

inside the building and inclusive of excavation &

refilling of earth when laid outside the building &

interconnection with earth pit & all electro-

mechanical equipments.

(25X3 G.I Strip, 0.6 Kg/m, 0.6x100Mt.=60Kg.)

(Pump-Motor etc.)

6.1.4 SITC of HOT Dip Galvanized iron strip wire 8 SWG 21 Kg 77.00

(For LDB, PDB, LCS, etc.)

(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 200Mt.=21)

7.1.1 INTERNAL WIRING 300 Mtr 115.00

SITC of Mains & outlet points wiring with 1.1 kV

grade FRLS PVC insulated ISI marked flexible

stranded copper conductor wires with medium class

min. 25mm. dia. Rigid PVC pipe and accessories

to be erected concealed in / to be run on surface / wall

/ ceiling with following sizes as mentioned below.

The unit rate wirings shall be with connector, PVC

junction box, wires, holder, ceiling rose, angle

holder, switch, sockets, switch board, brass

chromium / cadmium plated machine screws, phase

and neutral wires, green Earth continuity wires etc. as

required to complete wiring from LDB panel to the

final outlet termination points. The wiring shall be

as per IS:732, IS:4648 and as per tender

specification / IS.

(a) SITC of Mains wiring with 3 wire 1.5 sq.mm.

7.1.2 As per Above Item SITC (b) of Mains wiring with 3 200 Mtr 134.00

wire 2.5 sq.mm.

7.1.3 As per Above Item1 (c) SITC of Mains wiring with 4 200 Mtr 123.00

wire 1.5 sq.mm.

7.1.4 As per Above Item(d) SITC of Mains wiring with 4 200 Mtr 158.00

8.1.1 SITC of Point wiring for Light / fan / Bell / 25 Nos 351.00

Primary Point with 2nos. 1.5 sq. mm & earth wire

of 1.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multistrand copper wires,

pipe to be erected concealed in flushed on wall

/ ceiling, complete with 6A Tissino Type ISI marked

flush type switch / bell push & accessories erected on

metal / PVC Box covered with 3 mm thick PC

(Polycarbonate) / Acrylic sheet with necessary

lamp holder / ceiling Rose / H. D. connector as

directed with medium class Rigid PVC pipe &

accessories.(a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ceiling

8.1.2 SITC of 6A independent Plug with 2nos. 1.5 sq.mm 5 Nos 310.00

Cu. Mains size wiring & earthwire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires with

medium class Rigid PVC pipe and accessories to be

erected on wall / ceiling, complete with ISI marked

/ 5 Pin socket and tissino type switch erected with

earth continuity connection erected on Metal / PVC

box covered with 3 mm thick PC(Polycarbonet) /

Acrylic sheet. ( 3 nos. at Pump House & 2 Nos at

8.1.3 SITC of One 300/380 mm dia. Ex fan 16A 6 Nos 829.00

independent Plug point near Ex. Fan with 2nos.

sq.mm Cu. Mains size wiring & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires with

medium class Rigid PVC pipe and accessories to

be erected on wall / ceiling, complete with ISI

marked 3Pin socket and tissino type switch erected

with earth continuity connection erected on Metal /

PVC box covered with 3 mm thick PC(Polycarbonet)

/ Acrylic sheet. Plug point shall be near Ex.Fan.

(For 4nos. Pump House, 2 Nos LT Panel room)

8.1.4 SITC of 6/16A independent Plug with 2nos. 4 4 Nos 601.00

sq.mm Cu. Mains size wiring & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires

with medium class Rigid PVC pipe and accessories

to be erected on wall / ceiling, complete with ISI

marked 3 / 5 Pin socket and tissino type switch

erected with earth continuity connection erected on

Metal / PVC box covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet.

( For 4 nos. Pump House/ LT Room)

8.1.5 SITC of Single Phase 20A 3 Pin Matal clad 4 Nos. 845.00

Industrial Type Socket with plug top and 20A

SPMCB, suitable for flush mounting, in 16 SWG MS

box of suitable size and covered with 3 mm thick

electrical grade hylam sheet or eqivalent ISI marked

Electrical grade bakelite sheet and earthing with

2.5 sq.mm insulated copper wire run inside the

conduit including interconnections etc. complete as

required. (2 no.PMCC Room & 2 Nos. pump House)

8.1.6 SITC of 415V Four Pole MCB Switch (C Curve) 3 Nos 573.00

having 10KA breaking capacity & confirms to

IS:8828 having capacity, 32A, CAT-III (For 1no.

Pump House, 1 No LT Room, For Elect. Hoist at

8.1.7 SITC of 3 watts LED Lamps integral type,cool white 2 Nos. 69.00

with PC diffuser suitable for B22 LAMP holder.

(For Panel room, Pump house)

8.1.8 1200mm sweep ceiling fan, capacitor type, 5 Set 1,581.00

having double ball bearing 450mm down rod,

canopies, shackle, rubber bush, blades, electronic

speed regulator, suitable to operate on 230V,50Hz

AC supply conforming to IS: 374/1979.Fan shall be

painted with white colour.

(5 Nos For office room / LT Panel)

8.1.9 380mm sweep 1400 R.P.M exhaust fan, capacitor 3 Nos. 3,052.00

type, having double ball bearing, M.S.blades,

mounting frame, forearms, suitable to operate on

230V,50 HZ AC supply conforming to IS: 2312.Fan

shall be painted with epoxy grey colour controlled by

one 6 A flush type switch on board and 6A plug point

(3 Nos. LT Room)

9.1.1 LED LIGHT FIXTURES: 16 Nos 530.00

SITC of Indoor wall mounting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA polyester powder coated and high U.V. &

corrosion resistance with diffuser and/or

Polycarbonate optics with company mark/name

to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

(Each fitting required LM-79 & LM-80 Certificates)

36 Watt or up to 25% higher wattage Tube Light

with integral / non-integral driver, Surge-4KV,

IP-20, 4 feet, Cat-III

(For 16 nos. LT Room/ Pump House)

9.1.2 SITC of Surface mounted LED Indoor Flood light 10 Nos. 6,028.00

fittings with High power White LEDs wattage of

1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

120 to 300 V,Power Factor more than 0.95, THD <

Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80 certificates)

90 Watt Indoor Flood Light (IP-65), Surge -4KV

(10 Nos. for pump house,/LT Panel room )

9.1.3 SITC of 'B' class galvanised iron pipe 32 mm outside 10 Nos. 340.00

dia 45 cmslong duly welded on 20 cms x 20 cms x

mm thick M.S. base plate, erected on wall or corner

for mounting luminaire with necessary hardware

materials duly painted for wall mounting indoor flood

light fixtures on Wall of Buildings.

9.2.1 EXTERNAL LED LIGHT FIXTURES & 12 Nos. 6,028.00

SITC of Wall mounted 80W LED Outdoor Flood

Light fittings with High power White LEDs wattage

of 1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

embossed 120 to 300 V,Power Factor more than 0.95,

THD < 10 %, CCT 5000 K to 5700K, Uniformity

ratio >0.45, Luminaire efficacy> 85 lumens/watt .

LED driver efficiency > 85 %. ( Each fittings

required LM-79 & LM-80 certificates) Flood Light

(IP-65), Surge -4KV, 80 watt Cat-III

(12 Nos For Outdoor on wall of LT Room & Pump

9.2.2 SITC of 'B' class galvanised iron pipe 32 mm 12 Nos 340.00

outside dia 45 cms long duly welded on 20 cms x

cms x 3 mm thick M.S. base plate, erected on wall or

corner for mounting luminaire with necessary

hardware materials duly painted for wall mounting

indoor & outdoor flood light fixtures on Wall of

10.1.1 SAFETY ACCESSORIES 2 Nos 8,586.00

SITC of following safety accessories complete

with necessary fixing brackets, other accessories

and tools etc. as required to complete the job.

Supply & Erecting carbon dioxide (CO2) fire

extinguisher of 6.5kg capacity with necessary clamps

made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete. (For 2 nos At LT panel

10.1.2 Supplying stand first AID box with anticeptic cream, 2 Nos. 297.00

medicine for use on wounds due burn, crepe bandage,

guage bandage, medicated ready to use bandage

(Band-aid) adhesive tape for medicinal user, scissors,

anticeptic solution (Savlon or similar) etc. (All above

contents shall be of standard makes) (For Pump

house / LT Room)

10.1.3 Providing printed instruction (First Aid) Chart 2 Nos. 129.00

both in English and Gujarati and duly framed with

front glasses, for treatment of person suffering from

electric shock. (1no. for HT Room & 1no. For LT

10.1.4 Supplying & fixing of FIRE bucket round bottom 3 Set 212.00

of 9 litres capacity made out of 24 guage G.I. sheet

with extra handle at bottom duly painted white inside

and Red outside with FIRE mark, filled with dry sand

and kept on stand provided or hung on wall hook.

10.1.5 Supplying and erecting floor mounting stand for 1 Nos. 933.00

keeping four nos. of FIRE buckets comprising

mm in length, 900 mm height frame made out of

30mm X 30 mm X 4 mm angle iron with cross

supports for legs, welded with 4 hooks and duly

painted with one coat of red lead and two coats of

approved enamelled silver paint.

10.1.6 Supply and laying of Synthetic Insulating Mat of 8 Mtr 763.00

Class - A of min. thickness 2 mm as per IS:15652 and

with good electrical insulation property for

1.1KV/3.3KV as per site requirement. .

(for PMCC & APFC etc. Panels)

11.1.1 MISCELLANEOUS: 1000 kg 64.84

Providing, Supply of Structure Steel at site of work

with freight, loading, unloading carting, etc.

including all taxes and duties complete such as joints,

channels, angles, Iron Rails, ISA/ISMC/ISMB/MS

flat, Plates, Chequered plates (below 10mm

thickness) etc. required for support structure of

Elecrto-Mechanical equipments etc. for support on

floor / wall / beam / brackets etc. as per tender and IS.

11.1.2 Labour Charges for lowering, laying, Fixing with 1000 kg 11.37

fabrication various size section of MS such as joints,

channels, angles, Iron Rails, ISA/ISMC/ISMB/MS

flat, Plates, Chequered plates etc Complete with two

coats of red oxide and two coats of approved colour

shade of epoxy paint as per relevant IS and as per

12.1.1 LIASONING CHARGES FOR OBTAINING 1 Ls 25,000.00

Liasoning Charges for obtaining N.O.C from

Electrical Inspector / Statutory authority for Power /

Ele. Installation. (Fees shall be paid by tenderer for

obtaining N.O.C. from Electrical Inspector /

Statutory authority on behalf of client and shall be

reimbursed on submission of orignial receipt to

Client). Liasoning Charges shall include preparing

required attasted documents & drawing for obtaining

NOC on behalf of client (Applicable Fees / deposits

shall be reimburse by Client).

TOTAL ESTIMATE OF ELECTRICAL WORK (W/O GST)

Name Augmentation and SITC of Sewage Pumping station with Related Mechanical, Electrical,

of Instrumentation and Civil Work with Five Years of Operation & Comprehensive Maintenance

Work For Shahibag SPS of Ahmedabad Municipal Corporation (AMC).

Description Qty. Unit Amount (in

Excavation for foundation for loose and soft

soil including sorting out and stacking of

useful materials and disposing of the

1 excavated stuff up to 50 meter lead.

Extra over item no. 1 above for lead from

2 m to 5 Kms. as directed. 85.00 Cmt. 408.41

Extra over item no. 1 above for lead from

3 Kms. to 10 Kms. as directed. 25.00 Cmt. 454.71

Filling with available excavated earth

(excluding rock) in trenches, plinth, sides of

4 foundation in layers not exceeding 20 cm in

depth consolidating each deposited layer by

ramming and watering. 100.00 Cmt. 129.10

Extra rate over item of excavation of earth if

excavation is to be done in wet. condition

5 without resorting to pumping but incl. of

bailing out of water. (Based on Previously

approved rate by C E sir ) 100.00 Cmt. 17.86

Providing and casting in situ C.C. in grade M-

15 (approx. corresp. to prop. 1:2:4)

(proportions as per mix design or as per Table

9 of IS456 2000 in masses by weigh batching

) using granite, quartzite trap metal of size

mm to 20 mm for RCC work, including

6 scaffolding centering, form work, needle

vibrated consolidation, curing comp.

(excluding cost of reinforcement and neat

finishing) with centering and

shuttering/deshuttering etc. comp. for

structure for other than water retaining.

Footing (without form work) 65.00 Cmt. 4,732.00

'Providing and casting in situ C.C. in grade

M-15 (approx. corresp. to prop. 1:2:4)

(proportions as per mix design or as per Table

9 of IS456 2000 in masses by weigh batching

) using granite, quartzite trap metal of size

mm to 20 mm for RCC work, including

7 scaffolding centering, form work, needle

vibrated consolidation, curing comp.

(excluding cost of reinforcement and neat

finishing) with centering and

shuttering/deshuttering etc. comp. for

structure for other than water retaining.

Footing (with form work) 15.00 Cmt. 4,906.00

Providing and cast in situ C.C. in grade M-30

proportions of ingredients as per mix design

by weigh batching using granite, quartzite

trap metal of size 12 mm to 20 mm and or

mm to 12 mm including scaffolding

centering formwork, needle vibrated

consolidation, curing and hydraulic testing

etc. complete (excluding cost of

reinforcement) with centering and

shuttering/deshuttering etc. camp. up to

meter height /depth Av. G.L.for all water

retaining structures -

a) R.C.C. Raft and footings with shuttering 25.00 Cmt. 8,213.00

b) R.C.C. walls 65.00 Cmt. 8,083.00

c) R.C.C. Staircase & Beam 25.00 Cmt. 8,486.00

d) Columns 5.00 Cmt. 9,317.00

e) Top Slab of Sump 15.00 Cmt. 8,213.00

Providing and cast in situ C.C. in grade M-25

proportions of ingredients as per mix design

by weigh batching using granite, quartzite

trap metal of size 12 mm to 20 mm and or

mm to 12 mm including scaffolding

centering formwork, needle vibrated

consolidation, curing and hydrulic testing etc.

complete (excluding cost of reinforcement)

9 with centering & shuttering/ deshuttering etc.

for all water retaining structures. -

a) R.C.C. footings & Raft with shutterig 15.00 Cmt. 8,077.00

b) R.C.C. Verticle Wall 10.00 Cmt. 7,936.00

c) R.C.C. Columns 10.00 Cmt. 9,195.00

d) R.C.C. beams, lintels and bracket for

gantry or chain pully blocks, plinth beams, tie

beams, weather shed, staircase etc. 10.00 Cmt. 8,347.00

e) R.C.C. slabs and platform 5.00 Cmt. 8,077.00

Providing and cast in situ C.C. in grade M-20

( proportions as per mix design or as per table

of IS456 2000 in masses by weigh batching)

using granite, quartzite trap metal of size

mm to 20 mm for RCC Work including

scaffolding centering formwork, needle

vibrated consolidation, curing complete up to

6 meter depth or height (excluding cost of

reinforcement and neat finishing) with

centering and shuttering/ deshuttering etc.

complete for structure other than water

retaining.(Without W.P. Chemical) -

10 a) R.C.C. footings & Raft

b) R.C.C. Verticle Wall

c) R.C.C. Columns

d) R.C.C. beams, lintels and bracket for

gantry or chain pully blocks, plinth beams, tie

beams, weather shed etc. 15.00 Cmt 6,722.00

e) R.C.C. slabs and platform

Supply cutting, Bending, Binding and

placing in position steel as per plan and

design and as per ISS 2502 including cost of

steel and binding wire for reservoirs/

structures only including lift up to 6 meter

height or depth below G.L. for all diameters.

Deformed(TMT)bars confirming to relevant

IS Fe-500 grade for all diameters. 25.00 MT 77,504.00

Brick work using common burnt clay

building bricks having crushing strength not

less than 35kg / Sq. C. M. in Foundation &

12 Plinth in cement morter1:5 (1 cement :

coarse sand) including racking out joints,

curing, scaffolding required if any etc.

complete, as directed. (B) Conventional 15.00 Cmt. 4,011.66

Brick masonry in cement mortar (1:5) using

common burnt clay building bricks having

crushing strength not less than 35kg/csmt

including scaffolding,curing, etc. complete

for walls, parapets, etc. at all levels. (B)

Conventional 40.00 Cmt. 4,283.91

Providing and applying 20 mm thick inside

cement plaster with water proofing agent on

inside of sump consisting of 12 mm thick

backing coat of CM 1:2 (1 cement : 2 sand)

and 8 mm thick finishing coat of CM 1:1 (1

cement : 1 sand) etc. complete including

necessary curing, scaffolding required if any

etc. complete. 375.00 Smt 202.00

Interior plain faced 15 mm thick cement

plaster (1:3) with floating coat of neat cement

slurry on Underneath Ceiling, where

specified on drawings at all levels including

scaffolding, curing, etc. complete. This rate

shall include moulding where specified. The

rate shall include 2% approved quality water

proofing compound (by weight) of cement. 500.00 Smt 295.90

Providing and applying 15 mm thick cement

plaster in single coat on brick work with

floating coat of net cement slurry for interior

plastering of pumphouse and outside

16 plastering of sump upto finished even and

smooth in Cement motar 1 : 3 (1 cement :

sand) including racking out joint curing,

scaffolding required if any, with necessary

cement finishing etc. complete as directed. 465.00 Smt 222.56

20 mm thick sand faced cement plaster on

walls upto height 10 metres above ground

level consisting of 12mm thick backing coat

17 of C.M. 1:3 (1-cement : 3-sand) and 8 mm

thick finishing coat of C.M. 1:1 (1-cement :

sand) etc. complete. (including around Pump

house) 500.00 Smt 297.68

Providing and laying cement concrete

flooring 1:2:4 (1 cement : 2 coarse sand :

graded stone aggregate 20 mm nominal size)

including water proofing compound finishing

with a floating of neat cement slurry etc.

complete laid in one layer finished including

necessary curing at bottom of sump.

50mm Thickness 115.00 Smt 348.08

Providing and laying cement concrete

flooring 1:2:4 (1 cement : 2 coarse sand :

graded stone aggregate 20 mm nominal size)

19 with iornite powder including finishing with

a floating of neat cement slurry etc. complete

laid in one layer finished including necessary

curing at Top of sump.40 mm Thickness 100.00 Smt 297.68

Providing and laying polished Kota stone

slab flooring over 20 mm (average) thick

base of cement mortar 1:6 (1 cement :

20 coarse sand) laid over and jointed with grey

cement slurry including rubbing and

polishing etc. complete

30mm Thick 100.00 Smt 1,085.48

Providing and laying polished Kota stone

slab 25 mm thick in riser of steps, skirting

Dedo & pillars laid on 10 mm thick cement

mortar 1:3 (1 cement : 3 coarse sand) and

jointed with grey cement slurry including

rubbing and polishing etc. complete 100.00 Smt 1,176.03

Applying two coats of Birla(white cement

based) or Asian (acryliclapy putty) or

equivalent & two coats of primer of approved

brand and manufacture on new wall surface

to give an even shade including thoroughly

brushing the surface free from mortar

dropping and other foreign matte rand sand

papered smooth. 490.00 Smt 40.19

Distempering (two coats) with oil bound

distemper of approved brand and

manufacture and or required shade on

undecorated wall surface to give an even

shade, over and including a priming coat with

distemper primer of approved brand and

manufacturer after thoroughly brushing the

surface free from mortar dropping and other

foreign matter also including preparing the

surface even and sand papered smooth. 490.00 Smt 76.08

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to removal

dirt, and remains of loose powdered

materials.etc complete 1050.00 Smt 113.40

Paint on soffit of tank roof slab with 2 coats

of bituminous paint including cleaning the

surface by scrapping and air blowers as

directed by engineer in-charge. 85.00 Smt 143.00

Providing and fixing window having

extruded aluminum Colour anodized section

frame main outer size 95mm x 24mm x

mm (of Jindal Section no : 2459 @ wt. of

0.738 Kg/mt), horizontal Three track member

size 92mm x 31.75 mm x 1.30 mm (of Jindal

Section no. 8688, @ Wt. 1.07 Kg/mt),

vertical member of size 92mm x 31.75mm x

1.50 mm (of Jindal Section no. 8933, @ Wt.

26 1.06 Kg/mt.) with sliding shutters of

horizontal member size 40mm x 18mm x .29

mm (of Jindal section no. 8947 @ wt.

Kg/mt.) vertical member of size 40mm x

18mm x 1.29mm (of Jindal Section no.

@ wt. of 0.456 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass

with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass

fixing to frame as per details etc. 20.00 Smt 1,568.27

Providing & fixing in position aluminium

grill with 15 micron natural matt brush finish

anodised as per over all size shown on the

drawings and aluminium sections of

approved make conforming to IS:733 and IS

: 1285, made out of DG - 104 design ( Jindal

or equivivelent ) fixed with required size F

channel, rawl plugs and screws or with fixing

clips, or with expansion hold esters including

27 necessary filling up of gaps at junctions, at

top, bottom and sides with required

PVC/neoprene felt etc. and aluminium snap

beading for glazing / panelling, C.

P.brass/stainless steel screws, including

standard anodised aluminium fittings and

fixtures of approved make and of adequate

size and in adequate numbers, including cost

and fixing of fixtures etc. complete as per

detailed drawings with all lead and lifts. 20.00 Smt 1,750.00

Providing and fixing standared extruded of

alluminimum section of size 63mm x

38.10mm x 1.2mm (Jindal Section : 2434, @

28 Wt. 0.643 Kg/mt.) with colour powder coated

alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete for

Ventilation 20.00 Smt 1,163.92

Providing and fixing 35 mm thick shutters for

Doors, windows and clerestory windows

including Indian teak wood frames 10 cm x

29 cm. size including anodized alluminium

fixtures and fastenings including primer coat

of approved quality and two coats of oil

painting etc, complete. (ii) Fully Panelled. 15.00 Smt 5,285.45

Providing and fixing in position 60 cm wide

MS ladder with angle of 75 x 75 x 6 mm as

support and 50 x 50 x 5 mm angle as step at

200 mm c/c including (both side) GI side

railing with ISA 75 support including fixing

in cement concrete for any height including

30 making holes in RCC walls if any and making

good the RCC wall / masonry wall after

fixing work of staircase etc. complete as

directed including two coats of approved

quality oil paint directed including two coats

of approved quality oil paint over one coat of

approved quality primer. 300.00 Kg. 5,616.00

Supplying, cleaning, cutting, bending,

welding, fabricating, erecting, structural steel

in position irrespictive of location and levels

31 as per drawings including handling and

transport, etc. complete including applying

two (2) coats of primer red oxide and two (2)

coats of approved quality paints 1600.00 Kg. 82.50

Providing and fixing Plastic Moulded

Reinforced Steps with 10 mm TOR Steel bar

with Plastic Polyproclene (P.P)

material(Vergin) Etc. Completed. 20.00 No 77.68

Grouting with 1:3 cement, sand mortar for

anchor bolt pockets, machine bases, pipe

33 sleeves, pockets holes, etc. including

roughening and cleaning of concrete

surfaces, curing, etc. complete. 10.00 Cmt. 4,536.00

Providing Cement Vata( 10cm x 10cm ) size

vata Quarter Round in Cement mortar 1:1

including neat cement finishing watering etc.

complete. 100.00 Rmt 23.45

Providing 100 mm x 100 mm size vata in

cement concrete (1:2:4) including water

35 proofing compounds, smooth finish, curing,

etc. complete for the internal side of the

sump, pump house 50.00 Rmt 40.00

Providing and fixing 40mm dia. GI pipe

medium weight quality as openable type with

angle iron support at 1.5 m c/c using 75 x

x 10 mm angles, 1 m long with three rows of

36 pipes as railing including necessary painting

with two coats of approved quality oil paint

over one coat of approved primer including

necessary welding, bolting required, if any. 50.00 Rmt 1,397.00

Providing and fixing M.S.Flanges to M.S.

Pipe as per IS specification and as directed by

Engineer in charge. -

a) Ring flange - M.S.Special Flanged ends -

37 Upto 300mm dia. 500.00 Kg. 98.00

300 mm dia and above 500.00 Kg. 98.00

b) Blank flange - M.S.Special Flanged ends -

Upto 300mm dia. 500.00 Kg. 98.00

300 mm dia and above 500.00 Kg. 98.00

Dismentaling tiled of stone floors laid in

mortar including stacking of serviceable

materil as and disposal of unserviceable

materials with all lead and lift. 5.00 Smt 47.25

Filling in plinth with sand under floors

39 including water ramming, consolidating and

dressing complete. 10.00 Cmt 455.63

Half brick masonary in common burnt

clay building bricks having crushing

40 strength not less than 35 Kg./sq.cm. in

cement mortar (1:4) in foundation & Plinth.

Conventional 5.00 Cu.m. 593.90

Providing and laying chequered precast

cement concrete tiles 22 mm thick with

aggregate of sizes upto 6 mm. laid in floors,

treades of steps and landing on a bed of

mm thick C.M. 1:6 (1 cement : sand) or

L.M.1:1.5 )1 lime putty : 1.5 coarse sand)

joint with neat cement slurry with pigments

to match the shade of tiles 100.00 smt 522.78

Providing and laying broken chine mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

42 tempered to bring mortar crème out up to

surface using white cement including

rounding off junctions and extending them up

to 15 cm along the wall,clearing with water

and oxalic acid etc.as directed. 105.00 Smt 739.89

Demolition of Brick work & stone masonry

including stacking of serviceable materials

and disposal of unserviceable materials with

all lead and lift. (i) In cement Mortar.

Demolition and disposal of unserviceable

44 materials with all lead and lift.(i)

Unreinforced cement concrete 50.00 Cmt 603.230

Demolition and disposal of stacking of

serviceable materials and disposal of

unserviceable materials with all lead and lift

(i) R.C.C work 50.00 Cmt 1047.380

Supplying Electric breakar machine for RCC

slab or Asphalt demolishing work on site by

using operator, fuel, power supply etc.

complete as directed.(no payment should be

46 allowed for non working condition of

machinary and for pipeline excavation and

M.H. work.allowed only for break down

work)(based on previously approved rate by

CE Sir) 10.00 Shift 956.63

Providing and Laying of Rubber Moulded

Paver Block Grey/Coloured 60 mm thick, M-

35 Grade of any size ; shape (Usually Uni-

Paver Blocks) using black trap good quality

aggregate of 20 mm nominal size for

footpath, parking areas, service lanes and

other areas as mentioned in the drawing /

instruction of engineer in charge. Cost

includes formworks using rubber mould,

Rate providing and laying paver blocks as per

required grading and specification. The paver

block shall be mechanically compacted. The

work of paving blocks shall be executed in

line and level by skill mason of flooring work

only. It should be laid in such a way that the

no cutting of the paver block to be necessary.

If cutting of paver block necessary then it

should be cut by machine only and carting.

The finished surface of the paver block shall

have reasonably good, plain finished. Paver

blocks shall be compacted and shall be relaid

if necessary. Gravel or such type of materials

shall not be allowed for production. Laying

on 5 cms thick sand bedding 150.00 Sq.mt 342.00

Providing and fixing wsh down watercloset

(Europeantype,W.C.Pan) with integral Por S

trap including jointing the trap with soil pipei

n Cement Mortar1:1(1-Cement:1-fine sand)

(Seal and cover to beme asured and paid for

separately) (A)vitreous China Pattern :(i) in

32 dia. C. P. brass half turn flush cock

complete including earthwork, bed concrete

Providing and fixing flat back white colour

vitreous china wash basin 550 mm x 400 mm

size with CI brackets painted white. Wash

basin shall have 15 mm dia GI supply pipe,

overflow chase, 15 mm dia pillar cock and

stop cock with PVC bottle trap and PVC pipe

piece upto wall plus 32 mm dia PVC waste

pipe upto floor level connected to 32 mm dia

CI pipe below floor and connected to nearby

floor trap complete with unions and

plumber's white soldered joints with

necessary cleaning eye, complete. All chases

cut in wall for fixing pipes shall be made

Providing and fixing Flat Back Urinal (

Hindware- 44cmx31.5cmx26.5cm) or

equivalent approved and of approved shade

including fixing the same in concealed CI

50 brackets, CP spreader, CP dome shaped

waste coupling, CP bottle trap with flanges,

CP angle cock flush pipe making inlet and

out let connections all complete as per the

instruction of Engineer - In - Charge 1.00 1,535.63

Providing, laying and jointing in true line and

level U.P.V.C. Pipe (SCH-40) for including

fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at

51 every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including

cost of all materials. -

Providing & fixing gun metal check or non

return full way wheel valve' -

Providing and fixing brass screw down stop

Providing and fixing screw down bib taps of

54 following size.(C)Gun metal screw down bib

tap. i) 15mm dia. 2.00 No 210.79

Constructing brick masonry chamber for

under ground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg.Cm 2in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm internal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23Kg.) and Wt. of frame

55 15Kg.) (R.C.C. top slab e with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete

etc. complete. (ii) Inside dimensions

500mmx700mm and 450mm deep for pipe

line with one or two inlets. (upto 10 ton)'

Providing and laying white glazed tiles 6 mm

thick in flooring, treads of steps,walls and

landing laid on a bed of 10 mm thick cement

56 mortar 1:3 (1 cement : 3 coarse sand)

finishing with flush pointing in white cement

(Upto 10 ton) In Dedo

Kota stone in Jams and Sills of the window

and ventilation and Door with one molding as

57 directed by Engineer-in-charge.

Supplying, fixing Push and Pull, 20 gauge

rolling shutter of approved make for the sizes

indicated on drawings including hood cover,

channel sliding assembly, helical coil

58 springs, brackets, interlocking latches,

locking arrangements, painting with 2 coats

of enamel paint over one coat of approved

primer paint etc. complete. Shutters having

width below 3.5M (gear Operated) 15.00 Smt 4277.000

Removing any kind of pavement incl

stacking of serviceble material disposal of

unserviceble material with 50 meter lead and

lift. 100.00 Smt 14

Labour work for fixing above interlocking

blocks on up to 50mm th sand bedding,

levelling, watering and fixing. Rate incl.

60 average 30cm depth for excavation and or

filling, carting away debries/excavated

material up to 5 km and cleaning the site etc.

Comp. as directed. 100.00 Smt 61.29

Excavation for pipe line trenches etc. for all

with shoring and strutting if required as per

required gradient and line including safety

provisions using siterails and stacking

excavated suff including upto all required

61 lead cleaning the site etc. complete for all lifts

and strata as specified. In all sort of soils and

Manufacture, Supply & Delivery, Laying of

Electric Resistance Welded (Up to 400mm)/

Submerged Arc Welded(Above 400mm)

M.S.Pipe having beveled ends plate or coil

conforming to IS-3589-2001 or its latest

revision/ ammendment for following

thickness outside diameter at GWSSB store

or site anywhere in Gujarat State including all

taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading,

62 unloading conveyance to Departmental

stores, stacking etc. all complete. (Rate

forMS Pipe based on the ex. works price of

HR Coil as Rs.54500.00 per MT (Above

mm to 10 mm) & Rs. 55000.00 per MT

(Above 10 mm) as on March-21 .( WPI Index

of H. R Coil of February-21 is 132.6) -

a) upto 914mm OD & upto 10mm Thickness

of Plate/Pipe 1,500.00 Kg. 70.67

b) Above 914mm OD & Above 10mm

Thickness of Plate/Pipe 1,000.00 Kg. 70.17

Gas cutting ( Either square cut or V cut)

pipes, plates etc. complete for following

63 thickness plate -

a) Above 10 mm thickness plate 100.00 Rmt 72.00

b) 5 to 10 mm thickness 50.00 Rmt 56.00

Welding in all positions with required

number of runs, for M.S. pipes internally and

/ or externally including gauzing wherever

64 necessary, fixing appurtenances and other

accessories in connection with pipe laying

work as per specification. Butt joints with

convex fillet welds Lag Lengths. -

a) Above 7 mm thickness plate 100.00 Rmt 729.00

b) 4 to 7 mm thickness 50.00 Rmt 681.00

Providing and supplying ISI Standard R.C.C.

NP3 pipes(of Sulphate Resisting Cement) in

standard lengths of following class and

diameter suitable for either collar joints or

rubber ring joints including all taxes,

insurance, transportation, freight charges,

octroi, inspection charges, loading,

unloading, conveyance to departmental

stores, stacking etc. One collar should be

supplied with each full length plain ended

RCC pipe, cost included in rates below. One

rubber ring should be supplied with each full

length socketed pipe, cost included in rates

300 mm dia. Sewer line 10.00 Rmt 755.00

450 mm dia. Sewer line 10.00 Rmt 1,361.00

600 mm dia. Sewer line 10.00 Rmt 1,946.00

900 mm dia. Sewer line 10.00 Rmt 3,601.00

1200 mm dia. Sewer line 10.00 Rmt 5,899.00

Lowering, laying and jointing R. C. C. pipes

including of following diameters in proper

position, grade and alignment at all level as

directed by Engineer-in-charge including

conveyance from stores to site of work,

labour, giving hydraulic testing as per ISI

300 mm dia. Sewer line 10.00 Rmt. 119.00

450 mm dia. Sewer line 10.00 Rmt. 171.00

600 mm dia. Sewer line 10.00 Rmt. 228.00

900 mm dia. Sewer line 10.00 Rmt. 340.00

1200 mm dia. Sewer line 10.00 Rmt. 440.00

1800 mm dia. Sewer line - Rmt. 650.00 -

Providing and constructing Sewer machine

hole s, scraper machine hole s and unit house

connection chamber, as per the type design in

brick masonry in C M 1 5 and inside and

outside 20mm thick plastering in C. M

necessary 100 mm coping with reinforcement

in RCCM 200 fixing C I steps and fixing

machine hole frame and covers (But

excluding supply of machine hole frame and

covers) over machine hole s and house

connection chambers and fixing machine

hole covers (but excluding supplying of

machine hole covers) over scraper machine

hole etc complete, providing and fixing

safety chain wherever necessary as per the

stipulations in the type design complete as

per latest CPHEEO manual (excl.

67 excavation) -

Scraper Machine hole type "S1" rectangular

type for 600 mm dia to 1200 mm dia sewer

line pipes and for depth 2.5m to 9.0m -

Scraper machine hole type "S1" as above but

Extra depth beyond 2.5 m and upto 9.0 m

depth for type "SI" scraper machine hole

above. 10.00 Rmt 31,907.00

Scraper Machine hole type "S2" rectangular

type for 1400 mm dia sewer line pipes and for

depth 2.5m to 9.0m -

Scraper machine hole type "S1" as above but

Extra depth beyond 2.5 m and upto 9.0 m

depth for type "SI" scraper machine hole

above. 10.00 Rmt 31,907.00

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment

etc. complete and stacking them within all

lead and lift.(i) Not exceeding 3 Sq.M. in

area. 20.00 Each 185.850

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

69 architraves, holdfasts and other attachment

etc. complete and stacking them within all

lead and lift.(ii) Exceeding 3 Sq.M. in area.

Dismentling barbed wire in fencing including

making rolls and also including dismentling

fencing posts including all earth work

concrete in base and making good the

disturbed ground stacking useful materials as

directed and disposing as directed and

disposing of the unserviceable materials with

all lead and lift. 500.00 Rmt 66.150

Removing and scraping of old deteriorated

plaster of any thickness from all Structural &

Non Structural member including stacking of

71 serviceable material and disposal of

unserviceable from site of work with all lead

Providing in line level plumb, fabricating and

fixing three row horizontal barbed wire

fencing and punched tape concertina coil of

turns per meter of 610 mm diameter fixied

with clips on top of the angle iron posts. The

punched tape concertina coil having sharp

barbs at every 25 mm spacing shall be

mm thick and 19 mm width and weighting

Kg./100 mtr. (Average) as per manufacture's

specification. The rate shall also include

providing and fixed 1.20 mt. total long MS

angle 40 x 40 x 6 mm @ 3.00 mt. c/c spacing

embedded in RCC column, angle posts shall

be painted with one coats of red oxide and

two coats of enamel paint of approved quality

at top of compound wall. 50.00 Rmt 449.00

Provide everything else required for

diversion of flow by pumping and / or

bypassing and to maintain the sewerage

system functioning normal and managing the

flow without any surcharging, overflows etc.

during the Desilting / rehabilitation works of

the sewer line to the satisfaction of the

engineer in charge of the work -

300mm dia & Below 10.00 Rmt 100.000

2000mm dia and above 10.00 Rmt 1200.000

Fixing of Rebar on concrete structure for

connection with new structure using

Hilti/Fischer or equivalent technology

including all labour, tools & tackels

temporary arrangement, safety measures etc.

10 mm dia. Bar 100.00 Nos 351.00

12 mm dia. Bar 200.00 Nos 420.00

16 mm dia. Bar 200.00 Nos 490.00

20 mm dia. Bar 100.00 Nos 560.00

Dewatering by pumping set of required

capacity including temporary platform

75 carting pumping at site and fixing the same

in position including all accessories, and

fuel and labour etc. complete 5000.00 HP/Hr 18.32

Providing the gunniting to interior surface of

cement / masonry / Water Tank of various

capacities as specified at various places with

cement mortar (1:2) in thickness of 40 mm

including chiselling and scraping loose

concrete and plaster incl. providing and

fixing in position 6 mm dia. mild steel bars

76 reinforcement at 15 cm c/c both ways

including fabricating and cost of binding

wires including centering , staging all

equipments etc. complete including

scaffolding , carting of all type of material

and equipments to site of work and giving

hydraulic testing up to satisfaction of

engineer in – charge 500.00 Smt 428.570

TOTAL ESTIMATE OF CIVIL WORK (W/O GST)

AHMEDABAD MUNICIPAL CORPORATION (AMC)

SCHEDULE OF QUANTITIES FOR

Augmentation and SITC of Sewage Pumping station with Related Mechanical, Electrical,

Instrumentation and Civil Work with Five Years of Operation & Comprehensive Maintenance

For Shahibag SPS of Ahmedabad Municipal Corporation (AMC).

(C) OPERATION & MAINTENANCE WORK

The works of this schedule comprises of the supply of all spare parts as required including the

supply of all labour (including reliever to ensure presence of specified type and no. of manpower

per shift), materials, consumables (except electrical power ), equipment, tools and tackles and

comprehensive operations and maintenance of At Shahibag SPS OF AMC.

Item Item of Work Dura Unit Rate Per Amount

No. - Month in per Year

tion Rs. in Rs.

Part PRE- O&M Cost (For 9 (Nine)

1.1.1 The works of this schedule comprises of 9 Months 53,883.00

the supply of all spare parts as required

including the supply of all labour

(including reliever to ensure presence of

specified type and no. of manpower per

shift), materials, consumables (except

electrical power), equipment, tools and

tackles and comprehensive operations,

repair and maintenance of SPS in AT

Shahibag SPS during the Nine Month of

Pre-O&M period during SITC work.

Total Staff salaryfor O&M period (of

months) for Operation, security, repairing

and maintenance for the complete Pre-

a) Pump operator- (ITI-

Wireman/Electrician/Experience person)

(3nos - One for each shift of 8 hours.)

Rate inclusive of PF, ESI, Bonus etc. as

per prevailing labour laws and regulation

1.1.2 During 9 (Nine) Month: 9 Months 17,128.00

b) Helper cum sweeper cum Mali

(10th pass-of age < 45 years ) (nos. - One

for General Shift.)

Rate inclusive of PF, ESI, Bonus etc. as

per prevailing labour laws and regulation

2 Comprehensive Maintenance

2.1.1 Comprehensive repairing, spares and 9 Months 14,300.00

maintenance of entire works alongwith

administration & managements charges

including running office, cost of

lubricants, consumables, spares, tools,

statutory periodical approvals & testing of

equipments etc. required in all except

supply of ele. power and sewage during

Pre-O&M period during SITC work.

A TOTAL PRE-O&M WORK COST

(Excluding GST)

O&M Cost (For 5 Year)

1.1.1 The works of this schedule comprises of 12 Months 53,883.00

the supply of all spare parts as required

including the supply of all labour

(including reliever to ensure presence of

specified type and no. of manpower per

shift), materials, consumables ( except

electrical power ), equipment, tools and

tackles and comprehensive operations,

repair and maintenance of SPS in AT

Shahibag SPS during the Five Year of

O&M period from the date of successful

Total Staff salary for O&M period (of

months) for Operation, security, repairing

and maintenance for the complete O&M

a) Pump operator- (ITI-

Wireman/Electrician/Experience person)

(3nos - One for each shift of 8 hours.)

Rate inclusive of PF, ESI, Bonus etc. as

per prevailing labour laws and regulation

1.1.2 During Second Year: 12 Months 56,577.00

Total of manpower, pump operator as

above (5% of Escalation on previous year)

1.1.3 During Third Year: 12 Months 59,406.00

Total of manpower, pump operator as

above (5% of Escalation on previous year)

1.1.4 During Foutrh Year: 12 Months 62,376.00

Total of manpower, pump operator as

above (5% of Escalation on previous year)

1.1.5 During Fifth Year: 12 Months 65,495.00

Total of manpower, pump operator as

above (5% of Escalation on previous

1.2.1 During First Year: 12 Months 17,128.00

b) Helper cum sweeper cum Mali (10th

pass-of age < 45 years ) (nos. - One for

General Shift.)

Rate inclusive of PF, ESI, Bonus etc. as

per prevailing labour laws and regulation

1.2.2 During Second Year: 12 Months 17,984.00

Helper cum sweeper cum Mali (5% of

Escalation on previous year)

1.2.3 During Third Year: 12 Months 18,883.00

Helper cum sweeper cum Mali (5% of

Escalation on previous year)

1.2.4 During Fourth Year: 12 Months 19,827.00

Helper cum sweeper cum Mali (5% of

Escalation on previous year)

1.2.5 During Fifth Year: 12 Months 20,818.00

Helper cum sweeper cum Mali (5% of

Escalation on previous year)

2 Comprehensive Maintenance

2.1.1 Comprehensive repairing, spares and 12 Months - -

maintenance of entire works along with

administration & managements charges

including running office, cost of

lubricants, consumables, spares, tools,

statutory periodical approvals & testing of

equipments etc. required in all except

supply of ele. power and sewage during

O&M period for First Year of O&M

(Covered under Defect Liablity Period

for First Year)

2.1.2 Total of Comprehensive Maintenance for 12 Months 14,300.00

2.1.3 Total of Comprehensive Maintenance for 12 Months 15,015.00

Third Year (5% of Escalation on previous

2.1.4 Total of Comprehensive Maintenance for 12 Months 15,766.00

Forth Year (5% of Escalation on previous

2.1.5 Total of Comprehensive Maintenance for 12 Months 16,554.00

Fifth Year (5% of Escalation on previous

3 Other Expenses

a) Monthly charges for SIM card for remote 60 Months 300.00

data transmittion to central SCADA of

B TOTAL O&M WORK COST (For 5 Year) (Excluding GST)

TOTAL OPERATION & MAINTENANCE WORK COST (A+B)

(Excluding GST)

Augmentation and SITC of Sewage Pumping station with Related Mechanical,

Electrical, Instrumentation and Civil Work with Five Years of Operation &

Comprehensive Maintenance For Shahibag SPS of Ahmedabad Municipal

Corporation (AMC).

Item Description Qty. Unit Unit Rate Total

No. (in Rs.) Amount

1 OFFICE FURNITURE 1 Nos. 6,128.00

Office Table of size 1200 mm length X 600 mm

2 Steel Office Chair 3 Nos. 1,649.00

GRAND TOTAL OF TOOLS, TEST EQUIPMENTS & SPARE PARTS

GRAND TOTAL OF TOOLS, TEST EQUIPMENTS & SPARE PARTS

Note: Above items shall be handed over to AMC before the commencement of O&M period for

Shahibag Sewage Pumping Station of AMC.

Name Augmentation and SITC of Sewage Pumping station with Related Mechanical, Electrical,

of Instrumentation and Civil Work with Five Years of Operation & Comprehensive Maintenance

Work For Shahibag SPS of Ahmedabad Municipal Corporation (AMC).

No. Rate Amount

1 Existing All Cubical Starter Panel For Pumps / All Switch Gear 1 Lot. - -

Panel (As per instruction given by the E-I-C.)

2 Existing APFC Panel (As per instruction given by the E-I-C.) 1 Lot. - -

3 Existing Chain Hoist Pully Block (As per instruction given by 1 Nos.

4 Existing HNC Pump Motor set (As per instruction given by the

5 Existing NC-SCF Pump Motor Set (As per instruction given by 2 Nos.

TOTAL OF BUYBACK AMOUNT -

Notes: The rate of the items shall be deducted from the capital cost of the tender and contractor

shall carryout all items.

AMC will take final decision whether to sell item or not. If AMC does not sell particular

item, the bidder will not get rebate amount of that item.