Supply of Materials For Construction of Anganawadi in Ward 4

Amount

Supply of Materials

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Coarse sand (zone III)

Portland Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Sundries

wall form panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Stone Aggregate(single size): 10 mm nominal size

Royalty for good earth

Adjustable span ESO+SI (2.35-3.40)

Twisted steel/deformed bars

Solid blocks of size 30x20x20cm

Solid blocks of size 30x20x15cm

Solid blocks of size 40x20x10cm

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Rawl plug 50 mm (designation 10 nos)

48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish

24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish

Fine sand (zone IV)

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Vitrified floor tile 60x60 cm

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Plastic emulsion paint

Synthetic enamel paint in black or chocolate shade

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

One piece European Water Closet S concealed 510 X 295 X 520 mm with seat cover and fittings

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Vitreous china flat back wash basin 550x400 mm

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Brass bib-cock-15 mm dia

PVC pipe 50 mm outer dia.6kgf/cm2

PVC pipe 110 mm outer dia. 4kgf/cm2

PVC bend 110 mm dia

S.W. gully trap type 100x100 mm

C.I. Grating 100x100 mm

C.I. Cover and frame 300X300 mm inside

Common burnt clay F.P.S. (non modular) bricks class designation 7.5

PVC vent cowl 110 mm dia

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

PVC pipe 63 mm outer dia . 6kgf/cm2

PVC pipe 15 mm outer dia 10kgf/cm2

Polyethylene water storage tank with cover and suitable locking arrangemnet

Material - 75 mm valve

Oxidised mild steel tower bolt (barrel type) 200x10 mm

Oxidised mild steel screws 30 mm

Iron hooks & eyes 100 mm

Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles

Anodised Aluminium hanging type door stopper

Chromium plated Brass screws 25 mm

PTMT - Towel Rail (600 mm)

Second class teak wood in scantling

Float Valve 20mm with Rod

Mild steel tubes hot finished welded type

Welding by electric plant

Boulder 50 mm to 200 mm

A F JENSON (BID ID -2220797)