Construction of Damaged Compound wall in Market Yard, Bhattiprolu of A.M.C, Vemuru in Bapatla District

Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.

Filling of foundations with sand including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.

P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work ( By Machine mixing)

VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work

a) For Footings

b) For Pedestal

d) For Plinth beam

Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work

Brick Masonry in C.M. (1:6) prop. Using 2nd class well burnt bricks Bricks traditional size 23 x 11 x 7 cms from approved quarry free from warping, distortion cracks, chips, flows stones and nodules free from lime in accordance with IS-3495-1966 and screened sand including cost and conveyance of all materials to site, scaffolding charges of all materials, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers.

Plastering 12mm thick in single coat in CM(1:5) for even surfaces including cost and conveyance of all materials like cement, sand (screened), water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work

Plastering 20mm thick in single coat in CM(1:5) for even surfaces including cost and conveyance of all materials like cement, sand (screened), water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work

Painting to walls with 2 coats of plastic emulsion paint of Over 1Coat of primer approved brand and shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work.

Supply and fixing in position M.S Ornamental Grill Gates using M.S flats, square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in RCC or Masonry works and making good the same where ever necessary, including cost and conveyance of all materials, labour charges and all other incidental and operational charges etc., complete as directed by the departmental officers.

Painting to new Iron work 2 coats with synthetic enamel paint of first grade approved brand and colour of ISI make over a primary coat including cost and conveyance of all materials including all labour charges for preparing the surface for painting all taxes etc., complete for finished item of work.