CA NO.CWE BLY/ GE (W) /44 OF 2024-25 SPECIAL REPAIRS TO MAIN ROAD FROM CSD DEPOT CHOWK TO MAIN ENTRANCE GATE NEAR OLD POST OFFICE INFRONT OF SHO AND ASC COY SPL REPAIR OF 1200 MTR ROAD IN DEPOT AREA AT ASC COY (SUP) UNDER GE (WEST) BAREILLY

Amount

M&L for repair to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed

scarifying or picking exc 50mm and not exc 100mm deep gravelled macadam or bitumininious macadam surfaces in area exc 400 sqm include racking over and grading the broken up surfaces to the proper camber etc as required and removing all as specified and directed

M&L for Preparing of black top surfaces by brushing with brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with agunny bags to remove all loose dirt and applying evenly a priming/ tack coat with bituminous primer at 05 Kg per 10 Sqm complete all as specified and directed.

Supplying, laying, spreading upto 75mm or less consolidated thickness of premix bituminous macadam carpet filling in depression (using 20mm graded stone aggregate) in single layer using mechanical paver using bituminous binder (VG-30) at the rate 4% by weight of total mix, laid/rolled and compacted/consolidated to required camber and gradient with 8 to 10 tone power roller to a uniform smooth surface complete all as specified and directed.

M&L for Preparing of black top bituminous surfaces by brushing with brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air pressure through air jet using air compressor to remove all loose dirt etc incl removing mud etc to a distance minimum 1.50 m from edge of road and applying evenly a tack coat of bituminous primer using paving bitumen (VG-10) at the rate of 5 Kg per 10 Sqm of road surface by sprayer operated hot pressure mechanisum, supplying, laying, spreading 40 mm consolidated thickness of semi dense asphaltic bituminous concrete carpet (VG-30) with 0.406 cum crushed and graded coarse aggregates with design mix formula with bitumen not less than 6% binder content incl using cement as in filler of minimum 2% using paver with mechanical paver all as specified in clause device for automatic leveling and profile control within the specified tolerance as mentioned in SSR Part-I , rolled with 8 to 10 tone powar Roller to uniform smooth surface and consolidated to required camber and gradient with power roller for uniform smooth surface complete all as specified and directed.

Material and labour for painting lines, dashes, arrows letter, marking etc of 3mm thick film on new surface or previously treated road surface with hot applied retro-reflective thermoplastic exc 10 cm wide n exc 15cm wide road marking paint (white/golden/yellow) conforming to MORTH (Clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160°C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed.

S&F in replacement delineator 1200mm long made of 2 mm thick steel sheet rectangular OD size 75 x 100mm. Bottom plate 2mm thick of size 150 x 150 mm for firm grip welded to base. Top end closed with 2mm steel sheet. At top on both sides diamond grade cube corner micro white reflector of size 75 x 125mm laminated in 2mm deep cavity to make it scratch resistant. Post to have two bands all around of white/yellow/red reflective sheet of width 225mm by keeping black coat as bands for greater night visibility. All coated with heat process and baked to 120°C or powder coated to make all weather resistant and fixing in PCC(1:2:4) with size of block 150mm x 150mm x300mm deep including required excavation and earthwork complete all as specified and directed. (Note: The rate of PCC and earth work shall be included in the unit rate quoted by the bidder)

S&F in replacement cat eye solar reflective type of metal body alloy of size 100 mm x 100mm x 20mm of red/yellow/white with PAMA striplens reflector of medel No DA 972.0 fixed with 100gm epoxy mixture and placing the cats eye without applying excessive pressure and fixed as per manufacturers instructions complete all as specified and directed.

Supply and fix in replacement solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65 mm) of high efficiency Mono crystafie solar panel 2.4V /0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactureres instructions etc all as specified and directed.

S&F rubber speed breaker made from heavy duty rubber and polythylene with high resistance wear and tear properly, height 3" for speed restriction, colours black and yellow combination, high reflective mark showing arrows in white marked on both side of yelow and black pieces, each side having each cap of size 250x1000x75mm and middle size of the speed breaker as 500x500 mm with four holes fixed with epoxy and heardner and bolt with epoxy and hardener as per manufacturers instrucitons complete all as specified and directed

M&L for painting to surfaces of stone, concrete surfaces of any description over 10cm girth or width not otherwise described with two coats of synthetic enamel paint over a coat of primer including preparation of old painted surfaces all as specified or as directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse, sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required compete

M&L for laying and compacting 75mm thick (compacted thickness) wet mix macadam (WMM) grading as per table 400-13 of MORTH specifications for road and bridge works 2013 manufactured in WMM plant material comprising of clean crushed, graded aggregate and granular material premixed withi water to a dense mass, spreading with sensor paver and rollign with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surfaces tolerances to be as per Table 900-1 of MORTH specifications for Road and Bridge works 2013

M&L for preparing wet mix macadam surface, potholes repair surfaces and by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loosse dirt etc and applying evenly a priming / tack coat with bituminous primer at 10 kg per 10 sqm all as specified and directed

M/s J P Bhatia (BID ID -3159261)

TEAM ACC INFRABUILD PRIVATE LIMITED (BID ID -3154090)