Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.7 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | L2₹20.4 L+₹2.2 L (12.3%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹20.9 L+₹2.7 L (15.0%)Rejected-Finance VILL CHOMON ADAMPUR JALANDHAR PUNJAB 144103 UDYAM PB 10 0011450 | JALANDHAR | PUNJAB | 144103 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹21.2 L+₹3.0 L (16.6%)Rejected-Finance 205L MODEL TOWN LUDHIANA | LUDHIANA | LUDHIANA | PUNJAB | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹21.4 L+₹3.2 L (17.8%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹25.3 L
EMD Value
₹50,600
Closing Date
12 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAMBA
GE SAMBA
SPL REPAIR TO BLDG NO P 19 OR MD ACCN AT CHOPRA LINE AT MIL STN SAMBA
2022_MES_557443_1
GE/SMB/T-54/2022-23
Open Tender
Civil Works
Item Rate
270 days
SAMBA
REF NIT
8 documents required · 8 mandatory
₹500
Yes
GE SAMBA
₹50,600
Yes
13 Dec 2022
14 Oct 2022
14 Nov 2022
14 Oct 2022
12 Nov 2022
29 Oct 2022
14 Oct 2022 - 17 Oct 2022
Amount
Taking down cement plaster on brick/concrete surfaces or stone walls, ceiling, etc, including raking out joints, hacking for key, scrubbing down with water etc and removing outside defence area, complete all as specified and directed . NOTE- Work will be carried out upto 2nd storey of bldgs also as per direction of Engr-in-charge including necessary scaffolding required as per site conditions & no extra payment shall be made on this account.
Rendering 15 mm thick cement plaster in cement mortar 1:4 in two layers 5 mm thick over 10 mm thick on brick /stone/concrete surfaces finished even and smooth without using extra cement (upto 2nd storey with necessary scaffolding), complete all as specified and directed.
Rendering 10 mm thick cement plaster in cement mortar 1:6 on on brick /stone/concrete surfaces finished even and smooth without using extra cement , complete all as specified and directed.
Rendering 5 mm thick on concrete surfaces in CM 1:3 on ceiling finished even and smooth without using extra cement , complete all as specified and directed .
Demolition of cement concrete (unreinforced) of any description ground to 2nd floors and removing the rubbish from the work site out side defence premises, complete all as specified and as directed.
Rendering 15 mm thick in CM 1:3 on concrete surfaces mixed with WPC compound, finished even and smooth using neeru finish to plastering as specified in sunken slab , complete all as specified and as directed. Note: WPC shall be measured and paid for separately
Cleaning of dust removal to all loose existing sunken floor any material manually and with heat tark gun to get smooth plain finished surface including removing of vegetation/plantation with no loose material on surface. Repair all joints and cracks with highly elastic bituminous cold applied putty of tarplasic having penetration after setting upto 8mm. Levelling of surface to give proper slope will be done as per site requirements with Shalipatch or equivalent make as approved by GE cold applied.Bituminous mortar and cold emulsion cum water proofing liquid of Shalikote-T-10 or equivalent make as approved by GE, created SSD condition on surface with water. Prime the surface with Tarfelt LM or equivalent make as approved by GE mixed with portable water in the ratio of 1:1 and apply @ 400gm per Sqm (as per surface condition). Apply first coat of Tarfelt LM or equivalent make as approved by GE having alongwith 200% conforming to ASTM-C-412 & having crack bridging of 8mm conforming to ASTM-C-836 with tensile strength after 7 days 0.50mm conforming to ASTM-C-412 with no diluation water on primed surface while the surface is still tacky with consumption of 700gm /Sqm. Lay Geotex of 45 GSM/fiber mesh simultaneously and paste it properly with overlap of 50mm.
Discription count down as per srl item no 7.00 Allowed of first coat to dry for 10 to 12 hrs. Apply 2nd coat on cured first coat with consumption @ 700gm/Sqm in opposite direction of 1st coat by brush or roller. Allow it to dry for 10-12 hrs after apply 3rd coat with consumption @ 700gm/Sqm. Ensure final curing time of 36 hrs before allowing/carrying out any further work. Conduct ponding test after minimum 7 days applying 2 coats of U V Resistand Elastomeric Exterior Axcrylic weather resistant water proof coating of Shalicryl - 215 or eauivalent make as approved by GE having elongation of 300% after curing of 14 days conforming to ASTM D-6083, for U V protection of bituminous Elastomeric Acrylic emulsified liquid membrance of Tarfelt LM or equivalent make as approved by GE to give long life and prevent its deterioration from sunlight. Note : Application of water proofing treatment will be done by authorised applicator only.
Plain Cement concrete 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in sunken filling and mass concrete, complete all as specified and directed
Supply only of liquid water proofing compound ISI marked complete all as specified and directed
G.I. Tubing 40 mm dia heavy grade galvanised laid over floors as a spout pipe in sunken floors, complete all as specified and directed.
Taking down cement plaster from chajjas or facias etc, incl. dismantling of damage conerete & repair the same with PCC 1:2:4 type B-0 (using 12.5mm crushed stone aggregate) on chajjas of any width and applying 10mm thick cement plaster in CM 1:3 mixed with water proofing compound, finished even & smooth using extra cement, complete all as specified and as directed. Noe- Rate quoted shall be deemed to include for scaffolding/formwork for single/double storey building of height 8.0 mtr and making good the disturbed surfaces.(Water proofing compound shall be measured & paid separately)
Demolition of reinforced cement concrete of any description ground to 2nd floors and removing the rubbish from the work site out side defence premises, complete all as specified and as directed.
RCC M-15 (Nominal mix) 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roof slab, landing, balconies, canopies, deck slabs, shelves and the like etc complete all as specified and directed.
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, chajjjas, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) incl fair finished surface complete all as specified and directed.
Use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor, roof and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete, complete all as specified & directed
Complete removal of existing water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Preparing existing surface of floor and brushing neat cement slurry with 3.0 kg of cement per sqm (b) Rendering 15mm thick in Cement mortar (1:4) on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 2% by weight of cement. (c) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (d) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface.
Cound down description as per srl item no. 17.00 (e) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm. APP membrane shall laid acorss the slope from lowest line of sloping roof towards ridge. (f) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat (g) Prepare newly surface of APP and applying two coats of water based bituminious aluminium paint @ 200 ml/sqm. Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed by Engr-In-Charge. Sketches of ponding shall be produced at the time of RAR. (iii) Water proofing compound shall be measured and paid for separately.
PCC 1:2:4 type B-0(using 12.5 mm graded stone crushed aggregate) as in roof padding coping, bed blocks etc complete all as specified and directed.
Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.
Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc complete all as specified and directed .
Brick work with sub class 'B' burnt bricks straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed .
Brick work with sub class 'B' burnt old size bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 but except bricks,complete all as specified and as directed.
Brick work with sub class 'B' burnt bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed .
PCC 1:2:4 type B-1 (using 20 mm graded stone crushed aggregate) as in coping, bed blocks etc complete all as specified and directed.
Rotational moulded polye- thylene water storage tanks of capacity 500 ltrs (cylindrical vertical with closed top) three layeres hoisted and fixed in position including all necessary connections all as specified in SSR Part I & including dismantling old unserviceable tank, complete all as specified and as directed.
Disconnecting of existing water tanks of capacity 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as directed.
Cleaning and removing all scale and dirt etc, from water tanks exc. 250 and n.exc. 500 ltr capacity in any position and from mouths of circulating pipes etc and disinfection completely by making all the arrangements and writing date of cleaning on side of tanks also obtaining completion from user ,complete all as specified and directed.
Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe of 15 mm bore pipe including making connections, fixed in repair, complete all as specified and directed.
Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20 mm bore pipe including making connections, fixed in repair, complete all as specified and directed.
20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repair minimum weight 20 mm size-210 gms),complete all as specified and as directed.
PVC water tank covers for 500 ltr to 1000 ltr capacity, complete all as specified and directed.
Taking down GI pipe 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed
GI water tubing medium grade of bore 15 mm dia with all fitting like as (Elbow, Tee, Sockets, Union, Nipple, and bend etc) on wall for water heater, complete all as specified and directed.
G.I. pipe 15 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors , but except pipe, complete all as specified and directed
Taking down GI pipe 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed
GI water tubing medium grade of bore 20 mm dia with all fitting like as (Elbow, Tee, Sockets, Union, Nipple, and bend etc) on wall for water heater, complete all as specified and directed.
G.I. pipe 20 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors , but except pipe, complete all as specified and directed
Taking down GI pipe 25 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed
GI water tubing medium grade of bore 25 mm dia with all fitting like as (Elbow, Tee, Sockets, Union, Nipple, and bend etc) on wall for water heater, complete all as specified and directed.
G.I. pipe 25 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors , but except pipe, complete all as specified and directed
Cutting chases,pining in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades ,shelves,lintels,etc.; and cutting chases for concealed water tubing or concealed conduit,wiring,etc,and making good cutting not exceeding 10 cm girth in brick walls. complete all as specified and directed.
Repair to existing PVC pipe/CI pipe including making the joints water tight by using suitable material including cleaning if required and refixing of any dia, complete all as specified and directed. Note - Work to be carried out up to 2nd storey building in any condition of working place / area.
Dismanting of floor hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed.
Non-skid Coloured ceramic tiles (1st quality) 7 to 8 mm thick (square / rectangular joint free) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a layer of mortor 15 mm thick in CM 1:6, complete all as specified and directed
Glazed coloured digital ceramic tiles (1st quality) joint free in vertical surfaces of wall of size 450x300x7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 on brick /concrete surfaces complete all as specified and directed .
Vitrified tiles (1st quality) light shade 10 mm thick(square/rectangular joint free) , double charged, polished area of each tiles exc. 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed
Vitrified tiles (1st quality) light shade 10 mm thick(square/rectangular joint free) , double charged, in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering on brick or concrete surface of wall 10 mm thick screed bed in CM 1:4, complete all as specified and directed
Taking down shutter of any description not exc. 1.0 sqm each and removing to store.complete all as specified and as directed.
Taking down shutter of any description exc 1.00 Sqm but not exc. 2.0 sqm each and removing to store.complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.5 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm but not exceeding 4 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.
Pressed steel frames 105mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed .
Pressed steel frames 125mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed .
2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed .
2nd class hard wood Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed .
Factory made solid PVC door frame of size 50x47mm made out of 5mm thick prelam PVC sheet with one or more rebate reinforced with MS square tube, fixed in opening as per specification & drawing No CEPZ/TD-378/11 sheet No 1/1, etc complete all as specified and directed.
Factory made Solid panel PVC Door Shutter, 30mm thick (style),consisting of frame made of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beadding and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
Box type steel windows with double shutter comprised of tubular frame and shutters made out of outer frame ERW tube 'P' section (60x45x25)mm and shutters of ERW tube 'P' section (50x35x20)mm openable shutters side hung including piston hinges with two nos of MS tower bolts 150 mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings / opening for cooler / AC where required. Steel windows will be double shutter external glazed and internal wire glazed complete all as specified and as per drawings no. CEPZ/TD-324/07 sheet 1/3 to 3/3. NOTE- The quoted rate against the above item shall also include- (i) 4 Nos MS steel lugs of 20x5 mm MS flat 20 cm long over all welded to frames (ii) PCC block for embedding lugs.
Box type steel ventilators with double shutters comprised of tubular frame and shutters made out of outer frame ERW tube 'P' section (60x45x25)mm and shutters of ERW tube 'P' section (50x35x20)mm openable shutters side hung including piston hinges with two nos of MS tower bolts 150 mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings / opening for cooler / AC where required. Steel ventilators will be double shutter external glazed and internal wire glazed complete all as specified and as per drawings no. CEPZ/TD-324/07 sheet 1/3 to 3/3. NOTE- The quoted rate against the above item shall also include- (i) 4 Nos MS steel lugs of 20x5 mm MS flat 20 cm long over all welded to frames (ii) PCC block for embedding lugs.
Framed work such as grills,gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 , complete all as specified and directed.
Repairs to steel window, ventilators of any size to make it functional (including slot pin, hinge, hook and eye of standard quality where required), resecuring of windows wire gauge and railings/grills by using welding equipments, complete all as specified and directed.
Repair/ easing of wooden door any type, glazed or panelled, by trimming the side of door shutter where rubbing with chowkhat, unscrew the hinges screws and lift the door and fix with screws, tightening of wire mesh etc complete all as specified and directed.
Pressed steel cup board frame 60x40 mm made out of MS sheet 1.25 mm thick with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 Type B-1 as in filling to back of chowkats including butt hinges 100 mm long.complete all as specified and directed. Note - Piano hinges measured separately.
Prelaminated MDF board 19 mm thick as in shutters/shelves(exteriorgrade), prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed .
Dismantling Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar, complete all as specified and as directed .
16 to 18 mm thick green udaipur marble in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick screed bed CM 1:4, complete all as specified and as directed .
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed .
Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.complete all as specified and as directed .
3.5 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding)
3.5 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron /Steel /Wood /Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.
Securing glass of any description in existing wooden and iron frames glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work ,complete all as specified and as directed . ( New length of frame reputtied shall be measured.
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and as directed .
Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples.complete all as specified and as directed .
Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples fixed in repair,complete all as specified and as directed .
Butt hinges of mild steel cold rolled medium weight of size 100mm complete all as specified and as directed
Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified and as directed
Aluminium handles, fabricated type, anodised Size-100mm, anodised section and fixed complete all as specified.
Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
Hasp & staple safety type aluminium anodised with mild steel hinges spin including bolt to hinges plate fixed with screws of 75 mm in length.complete all as specified and as directed
Aluminium hanging floor door stopper,twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and as directed
50 mm magnetic catches with brass body and striking plate including letting in as fixed complete all as specified and directed.
40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and as directed
Aluminium bottom door seal with brushes, length 1.2 mtr, fix with screw, suitable for wooden door fixed in repair, complete all as specified and as directed
Mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work, fixed in repair, complete all as specified and as directed
Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed
UPVC (SWR) 'B' type pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.
UPVC (SWR) 'B' type pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.
UPVC (SWR) 'B' type pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.
UPVC(SWR) 'B' type pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.
UPVC (SWR) , bends for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.
UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.
UPVC(SWR) , bends for 110 mm bore complete all as specified and as directed by Engineer-in-charge.
UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge.
UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.
UPVC (SWR) , reducers 110 mm dia complete all as specified.
UPVC (SWR) vent cowl 75 mm dia complete all as specified.
UPVC (SWR) floor trap plain with grating having dia of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repair, complete all as specified and directed.
UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, fixed in repair, complete all as specified.
25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windowsIncluding necessary fittings, fixed in repair,complete all specified and directed.
Sink Cock with swinging casted spout (Wall Mounted model) with wall flange, fixed in repair, complete all as specified Make:- Jaquar, Cat No-CQT-23347 or equivalent model in Cera/Hindware
Bib Cock with wall flange cast copper alloy, chromium plated fancy type, fixed in repair ,complete all as specified. Make :-Jaquar, Cat No:-SQT-23047 or equivalent model in Cera/hindware.
15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, fixed in repair,complete all as specified.
15mm bore CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair, complete all as specified.
Tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed in repair, complete all as specified.
Chromium plated, towel ring , complete all as specified.
Corner Glass Shelf (with Bracket) , fixed in repair as per directed by Engr-in-charge.
PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore, fixed in repair.
Brass chromium plated shower rose with or without swivel joints, 125mm size, including fixing to steel pipe or union, fixed in repair.
Vitreous China, wash basin white, flat back , size 400mmx300 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass, fixed in repair, complete all as specified and as directed by Engineer-in-charge. Make :- Cera, Cat No- S2040119 or equivalent model in Jaquar/ Hindware.
Full pedestal for WHB fixed in repair, complete all as specified. Make :- Cera, Cat No- S2090113 or equivalent model in Jaquar/ Hindware.
PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge. Make:- Cera, Cat No- B1010109 ( CONGO) or equivalent model in Jaquar/ Hindware.
WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe(Rate of including in taking out and removal of old WC seat unhygienic condition),fixed in repair, complete all as specified and directed . Make:- Cera, Cat Part No-S3010102 (CALINA) or equivalent model in Jaquar/ Hindware.
Sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 610mm x 460mm bowl size 560mm x 410mm x 200mm complete with CP waste coupling & PVC waste pipe ,fixed in repair, complete all as specified and directed . Make: Jainko, Model No- SSJ-1. & equivalent model in Prayag,Nirali, Jayana.
Sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm & bowl size 410mm x 355mm x 200mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make:- Jainko Model No .-SSJ-8. & equivalent model in Prayag, Nirali, Jayana.
Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (30"x36"x10") fixed with steel fastners or steel screw complete. Make:- Jainko, Model No.KRJ-4. and equivalent model in Prayag, Nirali, Jayana.
Stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement, fixed in repair, complete all as specified and directed . Make:- Jainko, Essco, Parko.
Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.
Preparation of new plastered or unplastered surfaces of walls and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.
Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over and including a coat of wall care putty and applying a coat of primer complete all as specified.
Preparation of new plastered/ concrete surfaces of walls and applying two coats of cement based paint over and including one coat of primer (up to 2nd storey with necessary/scaffolding) complete all as specified and directed by Engr-in-charge.
Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of walls, pillars, cornices etc (upto four storey bldgs) by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, rubbing with sand paper and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.
Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying one coat of white wash on ceiling, complete all as specified and directed.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of oil bound distemper including making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.
Preparation of old decorated surfaces including brooming down with steel wire scrapping down smoke soot moulds moss and efflorencet salts and trading oil and grasy spots etc. and applying one coat oil bound distemper on ceiling complete all as specified.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornices etc (upto 2nd storey with necessary scaffolding complete all as specified and directed.
Preparation of new wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying two coats of synthetic enamel paint on wooden surfaces of any description over acoat of pink primer ( up to 2nd storey with necessary scaffolding) complete all as specified and directed
Preparation of old painted wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying one coat of synthetic enamel paint on wooden surfaces of any description ( up to 2nd storey with necessary scaffolding) complete all as specified and directed
Preparation of new steel surfaces having width/girth exceeding 10 cm including necessry rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over a coat of red oxide primer ( up to 2nd storey with necessary scaffolding) complete all as specified and directed
Preparation of old painted steel surfaces having width/girth exceeding 10 cm including necessry rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface and applying one coat of synthetic enamel paint on steel surfaces of any description ( up to 2nd storey with necessary scaffolding) complete all as specified and directed
Writing letters or figures (Block, Roman. Italic or Indian) n.exc 30cm high including obliterating old writing of any description n.exc 0.2 Sqm with paint to match existing work complete all as specified .
50mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.
Taking down old unserviceable aluminium point wiring (light, fan, socket , power socket and bulk head fittings) from PVC/metallic conduit,on surface wiring, on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc complete all as specfied and directed.
Point wiring for one light/ fan/ exhaust fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) in and including PVC concealed conduit having thickness not less than 1.8 mm with sunken box having thickness not less than 2.0 mm thickness with 3 mm bakelite laminated socket ISI marked for switches and sockets , including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping as required and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed . Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)
All as per srl item No 134 above but for call bell point, complete all as specified and directed.
All as per srl item No 134 above but for 3 pin 5 amps on independent board complete all as specified and directed.
All as per srl item No 134 above but for 3 pin 5 amps on same board complete all as specified and directed.
Point wiring for one power point controlled by one switch with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked for switches and sockets , including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)
Switch piano flush type one way 5 amps SP complete all as specified and directed.
Switch piano flush type one way 15 amps SP, 230 volts complete all as specified and directed.
Socket outlet 3 pin 5 amps flush type complete all as specified and directed.
Switch Socket multipurpose 2 in 1, 6 pin 5 and 15 amps controlled by one switch flush type universal.
Bell push flush type with indicator, 6 Amps, complete all as specified and directed.
Electronic bell ding-dong, AC 230 volts, SP, complete all as specified and directed.
Ceiling rose 65 x 50mm three terminals complete all as specified and directed.
Ceiling fan regulator electronic type 5 stage speed variation,socket type is size, ISI marked complete all as specified and directed.
Lamp holder/batton holder/angle holder insulated body(Metal ring) with back bakelite plate suitable for batten fittings, complete all as specified and directed.
LED tube light fitting 20 watt, 230 volt,box type complete bipin holders, connector block and retro LED rod of 20 watt polycarbonate diffuser having high efficacy (single side connection) complete with all accessories internally pre wired batten(single side connection) including connecting up with three core twisted flexible copper conductor cable of suitable size and mounted on PVC square block complete all as specified and directed,LED tube rod ,make :Havells ,cat part no: TITANIANEO1213T8SSTL20WLED865SPC and LED tube light batten ,make :Havells ,cat part no: REGALBATTANT8UPTO1X22WSSBSWH or technocommerically equivalant make of Crompton/Philips/Halonix/Benlo. Note: (i) Contractor shall produce LM 79 & LM 80 test report form OEM owned NABL accredited laboraory. (ii) Contractor shall give gurantee of complete fitting/ fixtures for minimum of 2 years form the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of fittings/fixtures at no extra cost.
Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs. suitable for 10W IP-66 Make: Havells ,cat part no :HEXAFT10WLED857SSYMBOPC or technocommerically equivalant make of Crompton/Philips/Halonix/Benlo.
Sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 25 KA=01 NO (for incoming ) (b) MCB SP 63 amps = 8 Nos (for outgoings) . Note :- (i)The DB shall be VTPN series of Make : Schneider ,cat part no: A9HVD04L or equivalent make of L&T/ ABB/ Legrand/BENLO . (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (iii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble properly crimped. (iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost .
Sheet metal enclousre for DBs when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts single phase 12 ways complete all as specified and directed,
MCB SPN 63 amps 240 Volt 'B' series complete all as specified and directed.
MCB SP 6 to 32 amps 240 Volt 'B' series complete all as specified and as directed.
Submain wiring in and including PVC conduit 1.8 mm thick ,20 mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 4 sqmm(FRLS) and one run of PVC insulated,unsheathed multistranded copper conductor 4 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble etc including taking down old U/S brunt sub main wiring from wooden battens, complete all as specified and directed. (Two run of 4 sqmm plus one run 4 sqmm of earth wire will be measured as 1RM) Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)
Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in the ground (earth pit not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized iron wire 4mm dia as earth lead by means of nuts bolts,washers of GI upto test point,GI tubing light grade 15mm bore protection pipe and GI watering pipe 20mm light grade with funnel and wire mesh ,charcoal and salt,40mm thick pre-cast RCC M-15 (nominal mix) cover reinforced with XPM weight not less than 4 kg /sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover ,PCC M-15 (nominal Mix) pit,excavation and earth work in any type of soil and removing surplus soil to a distance n.exc.50m) and connecting, Testing on complition, Complete all as specified and shown on Electrical Plate No 3 of SSR-2009 Part-1. complete all as specified and directed. Notes:- 1. Earth lead & protection pipes length upto & including 7.50 mtr is included in the quoted rate. 2. Soil should be free from stone, boulders, aggregate, gravels etc.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
M/S NAGAR BUILDERS
M/s Sahib and Company
s k construction co
SIDDAHANT ENTERPRISES
THAKUR BUILDERS AND CO
BALI ENTERPRISES
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .