Construction /Upgradation of road from Thill Hakima road to Mohalla Chain Kumar house by way of pucca drain and protection work at village Thill Hakima.

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: OFFICE OF THE EXECUTIVE ENGINEER PWD(R&B) DIVISION NOWSHERA

Name of Work: construction /Upgradation of road from Thill Hakima road to Mohalla Chain Kumar house by way of pucca drain and protection work at village Thill Hakima.

Contract No: e-NIT No. 129 of 2025-26 Advertised Cost = Rs. 8.35 lacs Time Limit: 01 Month

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : Cum Excess(+) Full Conversion INR

Supplying and stacking of graded stone aggregate at site of size range. (Excluding Carriage) 63 mm to 45mm Cum Excess(+) Full Conversion INR

Supplying and stacking at site stone screening of size (excluding carriage) 13.2 mm nominal size (Type A) Cum Excess(+) Full Conversion INR

Supplying and stacking at site stone dust (excluding carriage) Cum Excess(+) Full Conversion INR

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density 63 mm to 45mm Cum Excess(+) Full Conversion INR

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge Cum Excess(+) Full Conversion INR

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. Sqm Excess(+) Full Conversion INR

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) Cum Excess(+) Full Conversion INR

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Cum Excess(+) Full Conversion INR

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 6591.25 Excess(+) Full Conversion INR

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Cum Excess(+) Full Conversion INR

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg Excess(+) Full Conversion INR

Centring and Shuttering including strutting, propping etc and removal of form work for

Foundations, footings, bases of columns etc. for mass concrete Sqm Excess(+) Full Conversion INR

Suspended floors, roofs, landings, balconies and access platforms Sqm Excess(+) Full Conversion INR

Carriage of material by mechanical transport from source to the site of work including loading/unloading and stakcing complete.

Sand for an av. lead 80 Kms distance Cum Excess(+) Full Conversion INR

Bajree/Stone aggregates below 40mm nominal size for an av. 20 Kms distance Cum Excess(+) Full Conversion INR

Stone aggregate 63mm to 45mm size for an av.20 Kms distance . Cum Excess(+) Full Conversion INR

Stone for an av.lead of 20 Kms distance. Cum Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information