AMRUT-2.0- Pathanamthitta Municipality- Design, Construction and commissioning of 10 MLD WTP at Pampoorippara, supply and laying RWPM, CWPM, Pump sets and Transformer etc

Amount

Appendix 1 A -Laying 400 mm DI RW Pumping Main from Pump House at Kallarakkadavu to WTP at Pampoorippara -Working Charges

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.14.7:Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials: 400mm diameter Ductile Iron Class K-9 Pipes.

18.70.7:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:400 mm dia pipes

18.83.9:Labour for cutting C.I. pipe with steel saw.400 mm diameter C.I. pipe

18.30.12:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:600 mm diameter pipe

18.69.1:Providing and laying D.I Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :Upto 600 mm dia

18.73.7:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :400 mm dia Ductile Iron Double Flanged

100.35.7:Testing 400mm DI/CI pipeline with potable water to the required test pressure. 400 mm dia Observed Data derived from item no.1026 of PHED DATA

100.37.11.1:In situ fabrication of M.S. pipes of size 400mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.11.2:Fabricating M.S. flanges of diameter 400mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.11.3:Cutting 400mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.11.4:Welding 400mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.11.5:Grinding cut and weld edges of 400mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.32.5:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 100mm Double Acting Air Valve.

18.31.1.2:Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately): 100 mm diameterClass II

100.31.2.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class II.

100.59.1:Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 200mm along the sides of proposed alignment of the pipe to be laid without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffic diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means and carrying out the excavation.

15.59:Dismantling of flexible pavement ( bituminous courses ) by mechanical means and disposal of dismantled material up to a lead of 1 kilo metre, as per direction of Engineer-in-charge.

16.78.2:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD88933/2022-2023:Supply and installation, Testing and commissioning of NR Valve 400 mm Dia with IS specification.

18.72.19:Providing and laying S & S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:300 mm dia Ductile iron Class K-9 pipes

OD238708/2023-2024:Supplying and fixing C.I with cover and frame for manholes;560 mm diameter (heavy duty) the weight to be not less than 208Kg.

Appendix 1 B -Laying 400 mm DI RW Pumping Main from Pump House at Kallarakkadavu to WTP at Pampoorippara -Cost of Materials

100.98.121:Supply of DI K9 Pipe Conforming to IS 8329/2000, 400mm Dia.

100.98.451:Supply of CI Air Valve with Flanges, Conforming to IS 14845 - 2000, Kinetic Air Valve Type DS1, Size 100mm.

100.98.458:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 100mm.

100.98.463:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 300mm.

Appendix 2 A- Laying Clear Water Pumping Main from WTP to existing OHSR at KWA office compound-Working Charges

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.14.7:Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials: 400mm diameter Ductile Iron Class K-9 Pipes.

OD89670/2022-2023:Labour for cutting C.I./D.I pipe with steel saw: 400mm diameter C.I./D.I pipe.

18.69.1:Providing and laying D.I Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :Upto 600 mm dia

18.68.1:Providing and laying D.I specials of class K - 12 suitable for push - on jointing as per IS : 9523 :Upt 600 mm dia

18.70.7:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:400 mm dia pipes

18.30.9:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:400 mm diameter pipe

100.37.11.1:In situ fabrication of M.S. pipes of size 400mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.11.2:Fabricating M.S. flanges of diameter 400mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.11.3:Cutting 400mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.11.4:Welding 400mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.11.5:Grinding cut and weld edges of 400mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

18.73.7:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :400 mm dia Ductile Iron Double Flanged

100.31.2.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class II.

100.32.4:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 80mm Double Acting Air Valve.

100.31.2.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class II.

100.35.7:Testing 400mm DI/CI pipeline with potable water to the required test pressure. 400 mm dia Observed Data derived from item no.1026 of PHED DATA

OD180010/2023-2024:Supply and installation of Cast Steel NR Valve 400 mm Dia

OD180022/2023-2024:Fixing 400 mm CW pumping main along the pillar of the OH reservoir at Pampoorippara using fabricated MS clamps made from 8 mm thick plates including material cost fabrication fixing using anchor bolts fixed to the column as per the direction of Department in charge including painting and making good the cut portion with concrete. ( item excludes the cost of laying /fixing pipes which will be paid extra)

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

18.72.19:Providing and laying S & S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:300 mm dia Ductile iron Class K-9 pipes

OD238707/2023-2024:Supplying and fixing C.I with cover and frame for manholes;560 mm diameter (heavy duty) the weight to be not less than 208Kg.

Appendix 2B- Supply of materials- Laying Clear Water Pumping Main from WTP to existing OHSR at KWA office compound-Working Charges

100.98.121:Supply of DI K9 Pipe Conforming to IS 8329/2000, 400mm Dia.

100.98.454:Supply of CI Air Valve with Flanges, Conforming to IS 14845 - 2000, Kinetic Air Valve Type DS2, Size 80mm.

100.98.481:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 80mm.

100.98.487:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 300mm.

Appendix 3 -Supply, erection and commissioning of pump sets

OD181555/2023-2024:Supply install and commission 3 HP vacuum pump with motor and all accessories and fittings complete

Appendix - 4-Supply, erection and commissioning of transformer

OD90661/2022-2023:Design Supply, erection, testing and commissioning of 500 KVA, 11KV/433V. 3phase, 50Hz. ONAN cooled , Outdoor type copper wound distribution transformers, suitable for parallel operation, with HV and LV side cable entry box arrangements, on load tap changer with 17 tap positions having +5% to -15% variations in1.25% steps with RTCC panel with AVR control relay, local and remote indication of tap position including first filling of oil, earthing etc. complete with all fittings as per IS 2026 and Kerala Electrical Inspectorate standards. Armoured multi core 2.5 Sqmm copper control cables shall be used for all external & internal interconnections . The cost of neutral grounding CT, control cables both internal and external shall be included in the cost of Transformer

OD90660/2022-2023:Supply, erection, testing and commissioning of 433V, 3phase, 4 pole, 800A, totally enclosed, single bus bar, floor mounting in metal clad, indoor extensible type flush mounted horizontal isolation and drawout type panel board comprising of 5 panel system (1 nos 630A MDO ACB as incomer, and 3 numbers 200 A microprocessor based MCCB (suitable for induction motor application) & 1 no 100MCCB as outgoings) The incomer switchgears, & outgoing switchgears should be suitable for installation in 3 phase , 3wire, 50Hz. AC, 433V, effectively earthed supply system, trip free closing mechanisum and all metering equipments, protective relays, Continuous earth bus at the bottom of the panel etc. complete as approved by Kerala Electrical Inspectorate and relevant standards. Armoured multi core 2.5 Sqmm copper control cables shall be used for all external & internal interconnections. The cost of control cables both internal and external shall be included in the cost of panel

OD90659/2022-2023:11KV Switchgear(Indoor) Supply, erection, testing and commissioning of 11KV, 630A, 350MVA, totally enclosed, single bus bar, floor mounting in metal clad, indoor extensible type flush mounted horizontal isolation and drawout type vacuum circuit breaker single panel system (1 no. VCB ) suitable for installation in 3 phase , 3wire, 50Hz. AC,11kv, effectively earthed supply system,comprising of motorised and spring assisted, independent, trip free closing mechanism and all metering equipments( A, V, KW, PF), protective relays etc. complete as approved by Kerala Electrical Inspectorate and relevant standards. Armoured multi core 2.5 Sqmm copper control cables shall be used for all external & internal interconnections. The cost of control cables both internal and external shall be included in the cost of HT panel.

OD90657/2022-2023:11KV Metering Unit Supply,erection, testing and commissioning of out door type metering unit consisting of the following accessories: Current Transformer CT Ratio 20/5 A( actual ratio may be decided after calculating connected load& maximum demand) Burden 15VA Accuracy Class 0.2S Potential Transformer PT ratio 11KV/110V Burden -100VA. Accuracy Class 0.2 The rate shall include the cost of testing the equipment at KSEB and all other incidental expences. The CT ratio should be fixed only after obtaining the power allocation from KSEB

OD90658/2022-2023:TOD Meter Supply,erection, testing and commissioning of TOD meter with maximum demand in KVA accuracy class 0.2S suitable for the above out door metering set housed in a weather proof out door Kiosk. The TOD meter shall satisfy KSEB specifications in force .The rate shall include the cost of testing the equipment at KSEB and all other incidental charges

OD90655/2022-2023:Supply of all materials and providing 11KV sub station yard using 4nos. 175x85mm. ISMB joist of 9.5M height, 100x50mm. MS chanel cross arms, 2sets of 200A, 11KV gang operated AB switches with operating handles of required length,2 sets of 9.6KV,6KA , Lightning Arrestors, 2sets of 11KV, D.O fuses, Pin insulators, Disc insulators and inter connections of the above items using 8mm dia copper wire with proper copper sockets , including all associated civil works and painting of all structurers with two coats of zinchromate primer and aluminium paint etc. complete including earthing, as per standard construction practices approved by Kerala Electrical Inspectorate and relevant standards

OD90656/2022-2023:Supply of all materials and providing substation yard fencing using 50 x 50 x 6mm angle iron frame work of size 1500x2500mm fitted with weld mesh of 10 gauge and bolted the same to 100 x 50 x 6 mm vertical channel erected at 1500mm c/c and 2500mm above ground level of substation yard and 500 mm below with 300 x300mm plain cement concrete (1:3:6) base using 40 mm granite aggregate and top surface finished neat including supply and spreading of river sand to a depth of 5 cm from ground level and spreading 40mm granite metal over this to a height of 10cm above grond level for the entire yard area with side protection using cement brick

OD90654/2022-2023:Supply of all materials and providing 2000mm wide 2500mm height weld mesh gate made out of 50 x 50 x 6mm Angles with necessary foundation locking arrangements etc. complete, including painting with two coats of zinchromate primer and aluminium paint as per standards

OD90651/2022-2023:Cabling, Earthing suitable as per the requirements and supply and installation of safety items, other miscellaneous items etc complete

OD90652/2022-2023:Supplying, fixing, testing and commissioning of automatic twin battery charger 200 Ah (float cum Booster) with distribution board with all instruments and protective devices etc. complete as per standards

OD90653/2022-2023:Supplying, fixing, testing and commissioning of Lead acid cell battery suitable voltage and capacity according to control voltage of panels and other equipment’s capacity at 10hrs rate of discharge assembled with plante positive and pasted negative plates with inter cell, inter raw, interior connectors etc. stand and cell insulators, sealed floats, nuts, bolt, washers etc with electrolyte of specific gravity 1.190 and accessories such as voltmeter, Thermometer, Hydrometer, spaners etc with teak wood stand with 3 coats of antiacid paint to accommodate battery

Appendix 5 -Site Clearance and Miscellaneous for WTP.

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.33.1:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

2.33.2:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Appendix 6 - Water Treatment Plant and necessary components

OD229717/2023-2024: Design Charges for WTP that includes comprehensive design of the 10 MLD WTP including vetting of the design by WASCON/ Reputed Engineering College as directed by the Engineer in Charge - Comprehensive design of the WTP including preparation of hydraulic design/structural design preparation of drawings including, General Arrangement, Hydraulic, Structural drawings, For Construction detailed drawings etc. (in AutoCad soft copy and 3 sets authenticated hard copy) Including third party vetting of design from Professionally accredited Agencies like Govt. Engineering Colleges/WASCON as directed by the Engineer in Charge Make assemble and submit a working model covering all the components of the WTP with required wiring motors to fit in a 2Mx 2M supporting stand in steel

OD228574/2023-2024:WTP - Foundation for WTP components, aerator, flash mixer, flocculator, clarifier, filer house sump/pumphouse etc. as per the design including Pile and footing. including pile/footing as per design. PCC, RCC (M25 or above) steel centering and shuttering, upto plinth level, vertical load testing etc, all works as er the Scope of Work complete.

OD228782/2023-2024:Construction of -Aerator, Flash Mixers and Raw Water Channel. - works above plinth level as per the Scope of Work complete. Includes but not limited to:- Cement Concrete work M25 or above for structures and M30 or above for water retaining structures, 1) Providing and laying in position ready mixed M-25/M30 grade concrete for reinforced cement concrete work 2) Centering and shuttering including strutting, etc. and removal of form 3) Steel reinforcement for R.C.C work FE 500 D or more 4) 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 5) Providing and mixing water proofing material in cement plaster work 6) Finishing walls with Acrylic Smooth exterior paint of required shade on all exposed surfaces 7) Providing and laying Ceramic glazed floor tiles of size 300x300 mm 8) Providing and fixing hand rail of approved size by welding 9) Finishing with Epoxy paint over all steel surfaces two or more coats over two coats of metallic primer

OD228822/2023-2024:Construction of Flocculator and Clarifier. as per the Scope of Work Complete Includes :- 1) Filling available excavated earth on sloppy area and compacting to the required compaction levels 2) Providing and laying in position PCC of specified grade 3) Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for rstructures and M30 or more for Water retaining structures 4) Centering and shuttering including strutting, etc. 5) Steel reinforcement for R.C.C work in Mechanically Treated bars of grade Fe-500D or more 6) 12 mm cement plaster of grade or more for water retaining structuresmix:1:4 /1:3 as applicable 8) Providing and mixing water proofing material in cement plaster work 9) Finishing walls with Acrylic Smooth exterior paint of required shade 10) Providing and fixing stainless steel (Grade 304) plates for the Lamellar plate system by fabrication, bending and fixing the SS brackets to the clarifier structure, fixing the SS plates etc complete

OD228831/2023-2024:Construction of Filter House. Includes :- 1) Filling available excavated earth in sloppy area and compacting to the required compaction levels for levelling. 2) Providing and laying in position PCC 1:2:4 (40 mm) 3) Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work and M30 grade or more for water retaining structures 4) Centering and shuttering including strutting, etc. 5) Steel reinforcement for R.C.C work with Mechanically Treated bars of grade Fe-500D or more 6) 12 mm cement plaster of mix:1:4 (as applicable) 7) 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 (as applicable) 8) Providing and mixing water proofing material in cement plaster work 9) Finishing walls with Acrylic Smooth exterior paint of required shade 10) Solid block masonry using pre cast solid blocks (Factory made) 11) Providing and fixing hand rail of approved size by welding etc. , including applying priming coat of approves steel primer. G.I. pipes 12) Providing lintels and sunshades in RCC 1:1.5:3 13) Providing and fixing aluminium work for doors, windows, ventilators and partitions 14) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc 15) Providing and laying vitrified floor tiles in different sizes 16) Providing and laying Ceramic glazed floor tiles of size 300x300 mm

OD228842/2023-2024:Preparation of Filter Media which includes supply and laying of the Pebbles, Sand as per approved design, etc. complete

OD228848/2023-2024:Construction of Offices complex, Solutions tank and wash water tank. as per the approved design and scope of work complete; Includes :- 1) Filling and compacting the earth to level the construction area including construction of retaining wall as required to hold the soil 2) Providing and laying in position PCC 1:2:4 (40mm) 3) Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work and M30grade for water retaining structures. 4) Centering and shuttering including strutting, etc. 5) Steel reinforcement for R.C.C work with Thermo - Mechanically Treated bars of grade Fe-500D or more 6) Solid block masonry using pre cast solid blocks (Factory made) 7) Reinforced cement concrete work for lintels and sunshades in RCC 1:1.5:3 8) Providing and fixing aluminum work for doors, windows, ventilators and partitions 9) Providing and fixing 12 mm thick prelaminated particle board flat pressed 10) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. 11) 12 mm cement plaster of mix:1:4 (as applicable) 12) 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 (as applicable) 13) Providing and mixing water proofing material in cement plaster work 14)Providing and fixing hand rail with G.I. pipes of approved size by welding etc. including applying priming coat of approves steel primer 15) Providing and laying vitrified floor tiles in different sizes 16) Supplying and fixing rolling shutters with ball bearng and gears 17) Providing and fixing ball bearing for rolling shutters. 18) Filling water with 5000 litre tankers 19) Supplying and fixing 500mm dia C.I. manhole 20) Structural steel work riveted, bolted or welded in built up sections 21) Finishing walls with Acrylic Smooth exterior paint of required shade 22) Finishing with Epoxy paint 23) Supply and fixing Vent Crawl 24) Providing and fixing PVC Door Frame 25) 35 mm thick factory made Solid panel PVC Door shutter

OD228849/2023-2024:Construction of sump, wash water tank, recharge mechanism pump house as per Scope of Work complete. Includeing 1) Laying and compacting the filled up earth in sloppy area to level the construction area 2) Providing and laying in position PCC 1:2:4 (40 mm) 3) Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work and M30 Grade for water retaining structures 4) Centering and shuttering including strutting, etc. 5) Steel reinforcement for R.C.C work with Thermo - Mechanically Treated bars of grade Fe-500D or more 6) Solid block masonry using pre cast solid blocks ( Factory made) 7) 12 mm cement plaster of mix:1:4 (as applicable) 8) 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 (as per scope) 9) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. 10) Supplying and fixing rolling shutters 11) Finishing walls with Premium Acrylic Smooth exterior paint 12) Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures 13) Jali Works including supplying fixing and painting 14) Supplying and fixing 500mm dia C.I. manhole 15) Providing and fixing ball bearing for rolling shutters 16) Steel work in built up tubular 17) Providing and fixing hand rail with G.I. pipesof approved size by welding , including applying priming coat of approved steel primer. 18) Excavating trenches 19) Supplying and laying HDPE pipes: 160mm/ 200 mm sor connecting wash water outlet to drains t

OD228865/2023-2024:Miscellaneous requirements of Water Treatment Plant such as flooring i and fencing the plot area Lettering etc as per scope of work complete

OD228866/2023-2024:Supply, installation, Testing, Trial run and commissioning of All Mechanical components of the Water Treatment Plant and recycling plant including, motors and gear arrangements, pumps (except Raw water and clear water pump sets) fabricating flocculating blade for clarifiers and flocculators, hand rails ,Flash mixers and other components as necessary, supply of DI piping systems for connecting components and carrying waste water as required, shutter arrangements in channels, supply, install and fix nozzle system for beds, all valves, flow/level/head loss measuring equipment as required, drainage system including piping /channels upto the wash water tank, Pumps /Blowers of adequate capacity with the Back wash system including by-pass arrangement to the channel in the nearby concrete road, gantry cranes for chlorinator room and for alum/lime lifting arrangement, supply and installation of the chlorinator unit supply, providing testing and commissioning of chlorinator unit with chlorine mixing pump and all connecting accessories(capacity of chlorinator for 100% over load with chlorine cylinders (1000 kg 4 Nos filled up with all certificates.)etc complete as directed by the Engineer in Charge. The pumps/motors etc shall be provided with operating and backup

OD253767/2023-2024:supply, installation, testing, and commissioning of electrical all items inconnection with WTP and recycliing plant like wiring materials,Cables from trans former to WTP ,wiring with sufficient number of Light , Fan, plug pints of light and Power, Yard lighting works as directed by departmental officers, Providing and fixing all fixtures including Ceiling Fan, Exhaust Fan, Pedestal Fan, wall mounted Fan and LED Lights of good quality wherever necessary and all other electrical works , CCTV works for all the areas in the WTP & outside(8Nos 5Mp camera woth all connected items one moth back up ),cables from main panel board to WTP and connected components,All safety works and items as per the standards of Electrical Inspectorate, , lightning arrester as per IS specification, all safety equipment etc complete as per latest IE rules as per directions of departmental officers.items approved by Kerala Electrical Inspectorate, , lightning arresters, and drawings for the electrical inspectorate.(All the work must be in accordance with Electrical Inspectorate standards.) , and all other electrical works for the satisfactory completion of the electrical works.All paper and allied works with Electrical inspectorate for approval and to be got approved by Electrical Inspectorate All the other cable works related to Electrical works, Supply and works of required Earthing, All paper and allied works with the Electrical inspectorate for approval and to be got approved by Electrical Inspectorate and all related mechanical works

OD228939/2023-2024:Provision for furniture, lab equipment, toilet facilities etc as per design. Including the following: 1) Providing and fixing wash basin. - 3 no. 2) Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink - 1 no. 3) Providing and fixing mirror of superior glass. - 1 no. 4) Providing and fixing toilet paper holder - 2 no. 5) Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid - 2 no.s 6) Furniture-Plastic Mid Back with Arm Chair-12 Nos, Almirah multi purpose new look steel locker wardrobe and Almirah Storage cabinet double door -4 Nos, wooden study table with drawer - 5 No.s, Plastic Armless chair - 7 no.s, Sofa set for guest room - 1 no., Double door Refrigerator - 1 no. 7) Supplying and installing ready made PVC Septic tank 8) Lab Equipments and Chemicals : PH monitoring meter - 2 no.s, Turbidity meter- 2 no.s, Jar test equipments - 1 no, Residual Chlorine Test kit - 20 no.s, Test tubes - 100 no.s, 100 ML beakers -30 no.s 9) Supply of 100Kg Chlorine Cylinder - 10 no.s 10) Safety items

OD230743/2023-2024:Supply and fix framed photos pertaining to the WTP including photos of construction stages, site visit of dignitaries/senior officials, major milestones etc as per the direction of the Engineerin charge. Total frame area- 30M2

Flow meter

OD253770/2023-2024:Supplying and fixing ( Including specials) Electro- magnetic flow meter 300mm confirming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD display unit . The flow water meter should have the housing ( flow sensor) to be made of SS 304/ Carbon steel with anti corrosive protection and inside liner to be made up of Hard Rubber or neoprene all conforming to drinking water standards.The flow meter should be coupled with HART data acquisition and transfer, with provision for wireless transfer through GSM. The manufactures should have the calibration standards as per ISO 17025 and product shall have sufficient warranty provisions.as per KWA circular and test certificate from FCRI palakkd.

OD254066/2023-2024:Supplying. providing,testing ,trial run and commission of chanel flow measureing equipment with all connecting accessories at suitable points.

ABU MATHEW

Bidder Name

ABU MATHEW

FINS Engineers and Contractors (P) Ltd