REPAIRS MAINT OF WOODEN FURNITURE ITEMS TRADE PATTEREN AND OPS WORK FURNITURES INCLUDING PAINTING AND POLISHING ETC AT JOSHIMATH RUDRAPRYAG GAUCHAR HARSIL SUKHI TEKLA NELONG MANA AULI AND NARENDRA NAGAR UNDER GE 871 EWS

Amount

Note:- Following unserviceable parts of existing wooden furniture shall be removed and replaced/repaired carefully without disturbing the adjoining parts including tightening, screwing, glueing, nailing wherever applicable and work will be executed where the furniture exists at BSO furniture yard of GE 871 EWS and Various locations at Joshimath under jurisdiction of GE 871 EWS as directed. Note :-area of maint can be increase/decreased as per direction received by higher authority.

Bed Hard Wooden with ply Top , FD- 246 :

Removing old unserviceable head board and supply & fixing new head board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete teak wood beading shall be provided all around as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note:- Plywood shall be make of Archid Ply/Green Ply/Century Ply/Kitplay

Removing old unserviceable foot board and supply and fixing new foot board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete 4mm thick teak wood beading shall be all around provided as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note:- Plywood shall be make of Archid Ply/Green Ply/Century Ply

Removing old broken long rails and supply and fixing new long rails of seasoned shisham/ teak wood of size 1985x100x35mm as per drg duly french polished.

Removing old broken short rails and stiffener and conversion of old broken long rail into short rails and stiffener from obtained from items no 1.13 above and fix the same as per drg as per existing duly french polished.

Removing old U/S worn out ply wood top and supply and fixing new ply wood top of 12 mm thick commercial BWR/ISI mark as approved by GE & rest all as per drg Note Plywood shall be make of Archid Ply/Green Ply/Century Ply

Preparation of wooden surfaces of Bed Hard wooden with plywood top by thoroughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing with french polish of one or more coat to obtain a glossy finish all as specified and directed.

Chair dinning High back (Drg No FD-357)

S&F in repairs first class teak wood rear & front leg all as specified and directed.

S&F in repairs first class teak wood rear/front/side rail all as specified and directed.

S&F in repairs first class teak wood back rest all as specified and directed.

S&F in repairs first class teak wood stiffener all as specified and directed.

M&L providing new Cushion of appropriate size of cool foam with dismantling old one with first class raxine as per sample held with GE. Make- Sleepwell/Featherfoam.

Preparation of surfaces of chair dinning cushioned by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish all as specified and directed.

Chair CBA DB-3942:

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and supply & fixing new side rails made out of seasoned shisham/teak wood duly holed as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood as per drg.

Removing of old unserviceable stiffeners and S&F new stiffeners made out of seasoned shisham/teak wood as per drg.

Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood as per drg.

M&L french polishing to repaired chairs with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Bed Hard Wooden with Ply Top/Bed Hard Special (TP)

Removing old unserviceable head board and supply & fixing new head board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete teak wood beading shall be provided all around as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note:- Plywood shall be make of Archid Ply/Green Ply/Century Ply/Kitplay

Removing old unserviceable foot board and supply and fixing new foot board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete 4mm thick teak wood beading shall be all around provided as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note Plywood shall be make of Archid Ply/Green Ply/Century Ply

Removing old broken long rails and supply and fixing new long rails of seasoned shisham/ teak wood of size 1985x100x35mm as per drg duly french polished.

Removing old broken short rails and stiffener and conversion of old broken long rail into short rails and stiffener from obtained from items no 4.3 above and fix the same as per drg as per existing duly french polished

Removing old U/S worn out ply wood top and supply and fixing new ply wood top of 12 mm thick commercial BWR/ISI mark as approved by GE & rest all as per drg. Note:- Plywood shall be make of Archid Ply/Green Ply/Century Ply/Kit ply

Preparation of wooden surfaces of Bed Hard wooden by thoroughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing with french polish of one or more coat to obtain a glossy finish all as specified and directed.

Chair easy cushioned FD-358 (m)

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg.

Providing new cushion on Back rest & Seat of appropriate size of cool foam complete with dismantling old one with first class raxine/tepstray cloth as per sample held with GE. Make- Sleepwell/Featherfoam

M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Chair dining FD-279 :

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg.

M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Chair writing (Drg No FD-202/ 250/285):

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg.

M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Chair easy FD-229, DB-4174 :

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg.

M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Re-canning of Chairs (FD-228, FD-224, FD-274, FD-250, FD-75, FD-228) :- M&L for removing of old/broken/unserviceable plastic cane and re-canning of chair dining, chair CB without arms/chair writing, chairs CB with arms, chairs writing, chair CB office, chairs easy FD/NF, with 2.00 to 2.5mm semi round cane plastic of white colour. Rest all as per drgs. The canning work shall be done in Godrej pattern.

Teapoy ( Drg No FD-382/ 232 & 278)

Removing the existing unserviceable leg from teapoy and S&F the same made of first class Teak wood to match with the existing all as specified and directed

Removing the existing unserviceable top rail (long/front) from Teapoy and S&F the same made of first class teak wood to match with the existing all as specified and directed

Removing the existing unserviceable top rail (short/side) from teapoy and S&F the same made of first class teak wood to match with the existing all as specified and directed

Removing the existing unserviceable top from teapoy and S&F the same with new one as to match with the existing made of 18mm thick pre-laminated MDF board one side laminated with 4mm thick teak wood beading all as specified and directed Make - Archid ply/Green ply/Century Ply/Kit ply/Bhutan

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for Teapoy all as specified and directed.

Table Dining 6/8 persons -FD-273/376 :-

S&F following components of Table including dismantling unserviceable one all as specified and as directed. Leg Shall be made of first class teak wood

Top made of 18mm thick pre-laminated MDF/Particle board one side teak face including provision of 4mm thick teakwood beading all around complete.

Short Rail shall be made of first class teak wood as directed

Long Rail shall be made of first class teak wood as directed

Preparation of wooden surfaces by thoroughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.

Peg Table:-

S & F following components of Table including dismantling unserviceable one all as specified and as directed. Leg Shall be made of first class teak wood

Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete.

Long rail shall be made of first class teak wood as directed

Short rail shall be made of first class teak wood as directed

Preparation of surfaces by thoroughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.

Table Dressing Gents with mirror ( Drg No FD-379)

M&L for removing the existing unserviceable looking mirror with frame from Table Dressing Gents with mirror and S&F the same of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror including minor repairs all as specified and directed. Note : Make of Mirror should be of Modiguard/St Gobain.

M&L for removing the existing unserviceable drawer from Table Dressing Gents with mirror and S&F new drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board one side laminated finish including provision of knob all as specified and directed.

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for Table Dressing Gents with mirror all as specified and directed.

Table Writing Wooden (Drg No FD-249, 275,33)

Removing the existing unserviceable top of the table writing and S&F new top as to match with existing made out of 18 mm thick pre-laminated MDF board of Make century ply/Green ply/Archid ply one side laminated finish duly providing 4 mm thick teak wood beading all around all as specified and directed

Removing the existing unserviceable leg of the table writing and S&F the same with new one as to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable leg (short) of the table writing and S&F the same with new one to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable side/bottom rail of the table writing and S&F the same with new one to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable back of the table writing and S&F the same with new one as to match with existing made out of 6 mm thick plywood commercial all as specified and directed

Removing the existing unserviceable side of the table writing and S&F the same with new one as to match with existing made out of 18 mm thick MDF board of Make- century ply/Green ply/Archid ply one side laminated finish all as specified and directed

Removing the existing unserviceable stiffener of the table writing and S&F the same with new one as to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable drawer of the table writing and S&F the same with new one to match with existing made out of 18 mm thick MDF board of Make century ply/Green ply/Archid ply one side laminated finish including provision of knob all as specified and shown on drawing. Note :- Knob shall be aluminium anodised (Dark Brown) chromium plated of approved size and quality.

Removing the old unserviceable complete cupboard from the table writing and S&F new cupboard as to match with existing made of 18 mm thick prelaminated MDF board Make of century ply/Green ply/Archid ply including back provided with 6mm thick commercial plywood all as specified and shown in drawing. Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality). (b) Hinges shall be 50 mm of approved quality.

M&L for preparation of wooden surfaces of the table writing with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified.

REPAIR TO TABLE CENTRE(FD-235, 274):

Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18 mm thick preliminated MDF board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood.

Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item.

M&L for preparation of wooden surfaces of the Center Table with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified.

TABLE CENTRE 2 TIER

Removing of old U/S existing top and bottom from center table 2 Tier and S&F new top and bottom of size as per drg. Top and bottom shall be 18 mm thick preliminated MDF/Particle board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood.

Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item.

M&L for preparation of wooden surfaces of the Center Table with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified.

Meat Safe FD- 47 (m):

Removing of old unserviceable front shutters with wire gauge/side wire gauge and S&F new front shutters with wire gauge/sides of wire gauge. Shutter should be fitted with 25mm long butt hinges. Wire gauge shall be of 12mm mesh and of 20 gauge. 75mm hasp and staple should be provided to top of shutter. All wood shall be 1st class teak. Two numbers ball spring catch shall be provided to each shutter and one coat of white paint .all as per shape and size shown on drawing No FD-47

Removing old unserviceable aluminium hasp and staple and S&F New 75mm long aluminium hasp and staple best quality. Drg No FD-47

Removing old unserviceable aluminium handle and S&F new 110mm long aluminium handle of best quality Drg No FD-47

M&L for preparation of old wooden surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply primer where ever required and one coat of synthetic enamel white paint of approved make & quality inside and out side of Meat safe all as specified and as directed by Engr-in-Charge. Drg No FD-47

SOFA SET 4/5 SEATER(FD-281)

M&L for removing the old worn/torn out cushion from sofa sets 4/5 seats and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & quality Make : sleepwell/Feather foam

M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from sofa sets 4/5 seats and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 300/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed.

M&L for removing unserviceable/ broken Front Legs of sofa set 4 and 5 seater and S&F New Front Legs to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken rear legs of sofa set 4 and 5 seater and S&F new rear leg to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken batterns of sofa set 4 and 5 seater and S&F new batterns to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken back rail for three seater of sofa set 5 seater and S&F new back rail to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken front rail for three seater of sofa set 5 seater and S&F new front rail to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken back rail for single seater of sofa set 4 seater and to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken front rail for single seater of sofa set 4 seater and to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken hand rest of sofa set 4 and 5 seater and S&F New hand rest to match the original complete all as specified and directed.

M&L for preparation of surfaces of sofa set 4 seater by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed.

M&L for preparation of surfaces of sofa set 5 seater by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed.

SOFA SET 5 SEATER Special (TP)

M&L for removing the old worn/torn out cushion from SOFA SET 5 SEATER Special (TP) and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & quality Make : sleepwell/Feather foam

M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from SOFA SET 5 SEATER Special (TP) and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 300/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed.

M&L for removing unserviceable/ broken Front Legs of SOFA SET 5 SEATER Special (TP) and S&F New Front Legs to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken rear legs of SOFA SET 5 SEATER Special (TP)and S&F new rear leg to match the original complete all as specified and directed.

M&L for preparation of surfaces of sofa set 5 seater special(TP) by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed.

Sofa Set Single Seater Special (TP)

M&L for removing the old worn/torn out cushion from Sofa Set Single Seater Special (TP) and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & quality Make : sleepwell/Feather foam

M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from Sofa Set Single Seater Special (TP) and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 300/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed.

M&L for removing unserviceable/ broken Front Legs of Sofa Set Single Seater Special (TP) and S&F New Front Legs to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken rear legs of Sofa Set Single Seater Special (TP)and S&F new rear leg to match the original complete all as specified and directed.

M&L for preparation of surfaces of sofa set single seater special(TP) by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed.

Table office Clk wooden.

Removing the existing unserviceable top of the table writing and S&F new top as to match with existing made out of 18 mm thick pre-laminated MDF board Make of century ply/Green ply/Archid ply one side laminated finish duly providing 4 mm thick teak wood beading all around all as specified and directed

Removing the existing unserviceable leg of the table writing and S&F the same with new one as to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable side/bottom rail of the table writing and S&F the same with new one to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable stiffener of the table writing and S&F the same with new one as to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable drawer of the table writing and S&F the same with new one to match with existing made out of 18 mm thick MDF/Particle board of Make century ply/Green ply/Archid ply one side laminated finish including provision of knob all as specified and shown on drawing. Note :- Knob shall be aluminium anodised (Dark Brown) chromium plated of approved size and quality

M&L for preparation of wooden surfaces of the table Office Clk wooden with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified.

m/s MD pandey sons