PROVN OF ELECTRICALLY OPERATED MECHANICAL LAUNDRY WITH ANCILLARIES AND SPRINKLER AND CONNECTED W/S PIPELINE FOR ARBORICULTURE IN SEPTA AND REPAIR/REPLACE OF BER CENTRIFUGAL PUMP NONCLOG,SEWAGE PUMP AND SUBMERSIBLE PUMP SET FOR BOR WELL GE A JAMNAGAR

Amount

Supply and Installation , commissioning of Washer with hypo Extractor Machine with loading capacity 30 KG dry weight per charge front loading open pocket, heavy duty, high spin, lop suspesion, fully stainless steel cabinat suitable for powder/liquid detergent compartment, electrically heated, stainless steel inner cylinder, outer dum loading door, front SS , inner basket, having three lifter design, single motor with variable frequency (VRF) inverter drive for various speeds for wash distribution low, normal and high spin , turned suspension for less vibration performance fully indication system, solenoid operated water inlet valve electrically operated (motorized) drain valve, operation on AC supply 3 phase, 415 Volts , 50 Hz complete all as specified and directed by Engr in Charge. (Make : Lemison Laundry equipemnts Pvt Ltd or IFB, LG & Samsung )

Supply and Installation, commissioning of Thumble dryer Machine electric heating for automatic drying & cool-down with digital temperature control, step by step shows cycle status, with stainless steel heating elements with galvanised rectangular pins, individually mounted of capacity 30 KG dry weight per change front loading open pocket, heavy duty , operation on AC supply 3 phase, 415 Volts, 50 Hz complete all as specified and directed by Engr in Charge. (Make : Lemison Laundry equipemnts Pvt Ltd or IFB, LG & Samsung )

Supply and Installation, commissioning of Flat Bed Press Hydraulic comprising Hydraulic Operated Buck with Moisture suction, Auto Time Release ,Rocker Arms , Air Cylinder : Rocker arms move on ball bearings. Front head weight is counter balanced by springs. A Hydraulic cylinder is activated by foot push paddle affect raising & lowering of head. Smooth operation of Rocker arms & Head. Centerfugal suction Blower is connected with Bed. 2 Foot push Paddle is used for easy process. One for auto recycle and other for air suction. Auto starts at the time of pressing & stop at the time of the release. Keeps padding dry at all times. Efficient moisture suction. Quick drying time. Digital Time & Temperature at present time automatic release of head. Auto reset for next operation. Digital temprature controller for electric heated model. Safe drying & fine pressing of flat linen, garments or Bed-sheets, heavy duty, operation on AC supply 3 phase, 415 Volts, 50 Hz complete all as specified and directed by engr-in-charge (Make : Lemison Laundry equipemnts Pvt Ltd or IFB, LG & Samsung )

Supply and Installation , commissioning of Vacuum Ironing Table and Automatic Electric Steam Boiler comprising Efficient airflow. Padding remains dry at all times. From high porosity padding. Connected to table top. Mounted on a high torque electric motor for quick start. Activated by spring loaded, full length foot pedal. Low noise & vibration less performance. Efficient moisture suction, quick drying of table top & padding, heavy duty, operation on AC supply 3 Phase , 415 volt ,50 Hz complete all as specified and directed by Engr in Charge. (Make : Lemison Laundry equipemnts Pvt Ltd or IFB, LG & Samsung )

Supply and laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables(heavy duty) with stranded aluminium conductor, 1100 volts grade of size 3.5 core x 35 sq mm complete all as specified and directed by Engr in Charge.

S&F for metal clad box suitable fot Triple pole and earth encolsure with a three pin and earth plug with socket complete with one MCB TPN 63 Amps complete all as specified and directed by Engr in Charge.

Supply and laying for galvanised iron tubbing medium grade and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches of size 25 mm dia complete all as specified and directed by Engr in Charge.

M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in grond (earth pit not less than 2.25 mtrs below normal ground level) with the top edge of the plate not less than 1.5m below the normal ground level connected to GI wire 4.00mm dia protected by 15mm bore GI pipe (light grade) and watering pipe 20mm bore GI pipe(light grade) and chamber PCC (1:4:8) type D2( using 40mm grade stone aggregate), coping shall be PCC (1:3:6) type C1 using 20mm graded stone aggregate and RCC (1:2:4) type B1 using 20mm graded stone aggregate, pit cover 50mm thick reinforced with 8 mm MS bar at 80mm c/c both way in lieu of CI pit cover with lifting hook including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No-3 of SSR part-I and as specified including earth plate packed around with charcoal dust common salt complete including GI sheet funnel, wire mesh, earth lead wire 4mm dia and earth lead connected to earthing test point/ main board. The GI earth wire 8 SWG under the earth and on pole/db upto a height of 1.5m shall also be protected by 15mm dia GI pipe (light grade ) and the GI pipe to be fixed with poles/wall by means of 02 Nos. FI clamp 25x3mm with nuts bolts and washer etc. complete all as specified and directed by Engineer-in-Charge. Note :- GI earthing wire of same size upto 7.5m shall deemed to be included into quoted rate

Excavation in trenches n.exc 1.5M wide and n.exc 1.5 M in depth and getting out in soft/Loose soil all as specified and directed by Engr-In-charge.

Returning, filling in, including levelling, watering and well ramming in layers, n.exc 25 cm each in soil all as specified and directed by Engr-In-charge.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point all as specified and directed by Engr-In-charge.

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable complete all as specified and directed by Engr in Charge.

Supplying and laying un-reinforced precast concrete cable cover, LV low voltage type -I flat size 250 mm x 150 mm x 40 mm complete all as specified and directed by Engr in Charge.

S&F vertical triple pole & neutral double door DB 4 way, metallic modular distribution board conforming to IEC 61439-3, suitable for flush surface mounting with incomming MCCB 4 pole 125 Amps , 16 KA copper busbar for each phase, two fully insulated & shrouded neutral bars, two earthbars, cable ties for cable management, prefitted masking sheet etc having IK 09 & IP 43 protection complete all as specified and directed by Engr in Charge.

M&L for Submain with two run of 6.0 sqmm size main cable and one run of 6.0 sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLSH cable multi standed copper conductors, 1100 volts grade, IS -694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI grade ISI marked & fittings / accessories all fixed to the surface of wall/ceilling complete all as specified and directed by Engr in Charge.

S&F for Submerssible Pump sets of Capacity 12.5 HP (9.3kW) electric driven 415 volts, 3 Phase suitable for 150mm dia bore, 2830 rpm, 15 stage, min Head - 74 mtr & Max Head up to 205 mtr, complete all as specified and directed by Engr in Charge.

S&F Submersible cable, copper conductor multistarnded of size 3 core x 6 Sqmm complete all as specified and as directed by Engineer in Charge.

S&F HDPE pipe for lowering the submersible pump as a column pipe of size 50 mm dia, PE-100 Grade, PN-10 (SDR 13.6) complete all as specified and directed by Engr in Charge.

M&L for Development of existing tube well with compressed air minimum 04 Hr and after with 25% extra capacity pump by pumping muddy water complete all as specified and directed by Engr in Charge.

M&L for motor control panel made out of CRCA sheet 3 mm thick MCCB TPN 63Amps incommer, single phase preventor, Star delta starter suitable for 12.5 HP submersible pump motor, multi functional meter with suitable suitable CTs- 01 set and indicator lamps -01 set etc complete all as specified and directed by Engr in Charge.

M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less' than 1.5 metres below normal ground level, using galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed by Engr-in-charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed by Engr in Charge.

S&F making connections, provide proper alignement and testing after installation of Centrifugalpump set DSM 125/40 in size 150x125mm, in all following material of construction suitable with 75.0 KW /100 HP 1450 RPM TEFC, IE -2 , 3 phase, foot mounted motor with complete base frame & flexible coupling with CI casing and CI impeller complete including dismantling old unserviceable pump motor & shiftng to MES store Yard all as specified and as directed by Engineer in Charge.(Main Pump House Pump set No-02)

S&F Non clog submersible pump motor of 7.5 HP (5.5KW) 3 phase with CI Body, 30mm solid handling capacity, 100mm pipe size, Head 18 mtr with flow rate of 1500 LPM and RPM 3000 complete all as specified and directed by Engineer incharge. (Location : Sewage Pump Houses at OTM Sewage, New Line Sewage, Map Sewage for Standby)

S&F Non clog submersible pump motor of 10 HP (7.5KW) 3 phase with CI Body, 30mm solid handling capacity, 150mm pipe size, Head 14 mtr with flow rate of 1500 LPM and RPM 1440 complete all as specified and directed by Engineer incharge. (Location : Sewage Pump Houses at Dogra Line Sewage & Firing Range Sewage for Standby)

M & L for Cutting the existing MS pipe of size 150mm dia and making necessry arrangement to mount the PUMP motor for the system operational complete all as specified and as directed by engineer in charge.

M & L for MS Fittings such as bends (any type, radius and angle) tapers any type, flange,tee and reducing tees suitable for MS pipes of size 150 dia etc all as specified and directed by Engineer in Charge.

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 90 mm ,including fitting complete all as specified and directed by Engr in Charge.

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 63 mm ,including fittings complete all as specified and directed by Engr in Charge.

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 25 mm ,including fittings complete all as specified and directed by Engr in Charge.

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 20 mm ,including fittings complete all as specified and directed by Engr in Charge.

Supply and fix PPR Gate Valves (Brass Insert) of 90 mm bore complete all as specified and direcetd by Engr-in-Charge

Supply and fix PPR Gate Valves (Brass Insert) of 25 mm bore complete all as specified and direcetd by Engr-in-Charge

Supply and fix PPR Gate Valves (Brass Insert) of 20 mm bore complete all as specified and direcetd by Engr-in-Charge

Supply and fix ISI marked Brass Impact Garden automatic Rotating sprinkler with nozzle heavy duty irrigation sprayer Head of 20mm complete all as specified and directed by Engr in Charge.

M/s. Vimal Enterprise (BID ID -3130325)

Quick Building Service (BID ID -3140292)

fakhrie apostrical (BID ID -3133087)