Operation, maintenance and providing electrical maintenance (including facility management services, if any) for offices and residential complex for 05 months at Krishanshila Project.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Carriage of material by Mechanical Transport including loading, unloading and stacking Earth Lead - 2 Km

CARRIAGE OF MATERIALS by Mechanical Transport including loading, unloading and stacking-Lime, moorum, building rubbish Lead - 1 Km

Carriage of material by Mechanical Transport including loading, unloading and stacking Manure or sludge Lead - 2 Km

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for all heights: Foundations, footings, bases of columns, etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for all heights: Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for all heights: Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering including strutting, propping etc. and removal of form for all heights: Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for all heights: Columns, Pillars, Piers, Abutments, Posts and Struts.

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

25mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (12.50mm nominal size stone aggregates )

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Providing and laying matt finished vitrified tile of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Welding by gas or electric plant including transportation of plant at site etc. complete.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. In cement mortar

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm

Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of thickness 4 mm

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I. plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified.

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I. plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion: Shoe (Plain) 110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Neat cement punning

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer.

Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat.

French spirit polishing : Two or more coats on new works including a coat of wood filler

Removing and uprooting of unwanted vegetation grown over the drainage pipes, walls, Chajjas, balcony, and similar location of building upto floor Vth level with all tools & plants requireds with safety precautions and making good the same with plaster including disposal of material/ tree roots etc at the required place all complete as per instruction of EIC.

Lettering with black Japan paint of approved brand and manufacture

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade pigment using 50% white cement 50% Grey cement

Brickwork with non-modular non modular FALG bricks (FALG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc. complete in all respect.- in foundation and plinth level in :. In cement Mortar 1:6 ( 1 cement : 6 Coarse sand)

Half-Brickwork with non-modular non modular FALG bricks (FALG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc. complete in all respect.- in foundation and plinth level in :. In cement Mortar 1:4 ( 1 cement : 4 Coarse sand)

Brickwork with non-modular non modular FALG bricks (FALG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc. complete in all respect.-In superstructure above plinth level upto floor V level. In cement Mortar 1:6 ( 1 cement : 6 Coarse sand)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 gm per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood. 30 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Kiln seasoned and chemically treated hollock wood.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 18 mm thick

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 30 mm thick shutters. with ISI marked M.S. pressed butt hinges bright finished of required size - Kiln seasoned and chemically treated hollock wood.

Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type ) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness

Providing sunmica for wood work as per instruction of EIC

Providing ans pasting of metallica II wall paper of approved manufacture with using fevicaol and other chemical in proper portion as aadhesive for pasting on wall paper,wall paper should be pasted on wzall faces fre from wrinkles and as directed by Engineer in Charge including tools and tackles complete

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 75 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm

Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 100x58x1.90 mm

Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 50x37x1.50 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 30 mm thick plain PVC door shutters.

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement : 4 fine sand).

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and fixing aluminum U beading of required size to Pre-laminated/ flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 90 mm

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick

Lifting the damaged submersible pump and motor cable etc replacing it with working one and lowering the pump and motor assembly includingcable in bore holes dismentling the pipe during lifting and fixing the pipe during lowering with all materials and labour tools and plant etc complete as per inst.EIC)

Repairing of submersible Pump & motor with motor winding of submersisble pump set including changing of oil seal , rotor bush, oring impellers etc as required as per instruction of EIC with a guarantee period 6 Months:

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of approved by Engineer - in - charge.quality and make as

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

p/F WC extended floor mounting of cera or other approved make of approved shap including with dual flush fitting, including seat cover, fittinfs, nuts, bolts and gasket etc

P/F hand shower of jaguar make or equivalent (ALD-565)

P/F corner glass shelf (with bracket) of jaguar make or equivalent (ACN-1173)

P/F single lever wall mixer with provision of hand shower, but without hand shower (Jaguar make or equivalent((KUP-35119PM)

P/F exposed part Kit of single lever basin mixer wall mounted consisting of operating lever, wall flang, nipple and spout (suitable for item ALD-233 & ALD-235) (Jaguar make or equivalent ) (KUP-35233KPM)

P/F maze overhead shower 300mm round shape single flow(body & face plate stainless steel with chrome finish) with rubit cleaning system (Jaguar make or eauivalent)(OHS-CHR-1633)

P/F rimless single piece WC with UF soft close seat cover, tornado flushing, hinges , fixing accessories ste, cistern, fittings, S-trap 300mm. (Jaguar make or equivalent)(OPS-WHT-15851SN)

P/F swivel mirror of Jaguar make or equivalent (CAN-1195N)

P/F towel rack with lower hanger (stainless steel) with hook (Jaguar make or euiavalent)(AHS-1581H)

P/F soap dish holder of Jaguar make or equivalent (ACN-1131N)

p/f c.p. brass angle valve of jagur or other approved make for basin mixer and geyser points- 15mm nominal bore

p/f c.p. brass pillar cock of jaguar or other make for wash basin-15 mm nominal bore

p/f c.p. brass towel rail of jaguar or other approved

p/f liquid soap dispenser of jaguar make or other approved

p/f glass self of jaguar or other approved

p/f towel ring of jaguar or other approved

p/f white vitreous china round or suare type wash basined cera or other to be provided on granite top stone including making all connection

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT pillar cock of approved quality and colour . 15mm nominal bore, 107 mm long. Weighing not less than 110 gms.

Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing PTMT stop cock of approved quality and colour. 20 mm nominal bore, 89 mm long, weighing not less than 88 gms

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450 mm

Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board610x460 mm bowl depth 200 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - coloured

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid

Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter

Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729

Providing and fixing plain bend of required degree. 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 20 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 25 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 40 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 50 mm dia. nominal bore

Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore.

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore.

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore.

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 50 mm nominal bore.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 20 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 25 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 40 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 50 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 80 mm dia. nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore

Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 100 mm diameter pipe

Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 150 mm diameter pipe

Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 200 mm diameter pipe

Supplying pig lead at site of work.

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class I

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter Class I

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 200 mm diameter Class I

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes: Internal work - Exposed on wall 15 mm nominal outer dia. Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes: Internal work - Exposed on wall 20 mm nominal outer dia. Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes: Internal work - Exposed on wall 25 mm nominal outer dia. Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes: Internal work - Exposed on wall 40 mm nominal outer dia. Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes: Internal work - Exposed on wall 50 mm nominal outer dia. Pipes.

Repairing of sluice valve spindle by breezing proper machinery as per instruction of EIC 100mm to 125mm size

Supply of rubber gasket & standard quality

Labour rate for fixing G.I. pipes complete with G.I. fittings and making good the walls etc. Internal work - Exposed on wall 15 to 40 mm dia nominal bore

P &F G.I. fittings: G.I. Tee 15 mm dia

P &F of G.I. fittings: G.I. Tee 20 mm dia

P &F of G.I. fittings: G.I. Tee 40 mm dia

P &F of G.I. fittings: G.I. Socket 15 mm dia

P &F of G.I. fittings: G.I. Socket 20 mm dia

P&F of G.I. fittings: G.I. Socket 25 mm dia

P&F of G.I. fittings: G.I. Socket 40 mm dia

P&F of G.I. fittings: G.I. Socket 50 mm dia

P &F of G.I. fittings: G.I. Elbow 15 mm dia

P &F of G.I. fittings: G.I. Elbow 20 mm dia

P &F of G.I. fittings: G.I. Elbow 25 mm dia

P &F of G.I. fittings: G.I. Elbow 40 mm dia

P&F of G.I. fittings: G.I.Elbow 50 mm dia

P&F of G.I. fittings: G.I.Nipple 15 mm dia

P&F of G.I. fittings: G.I.Nipple 20 mm dia

P&F of G.I. fittings: G.I.Nipple 25 mm dia

P&F of G.I. fittings: G.I.Nipple 40 mm dia

P&F of CI sluice valve - 80 mm

P&F of G.I. fittings: G.I.reducer socket 25 to smaller size

P&F of G.I. fittings: G.I.reducer socket 40 to smaller size

P&F of G.I. fittings: G.I.reducer socket 50 to smaller size

P&F of G.I. fittings: G.I.Union 40 mm dia

P&F Bibcock/Pillarcock washer

P&F float valve for low level cistern

P&F syphone for low level cistern

P&F syphone washer for low level cistern

Providing and fixing PVC water tank cover

P/f glanel packing of approved quality…..EIC

P/f M-seal of approved quality

P/f water less urinal of approved quality

Dismantling & cleaning of all the spares of pump & refixing after properly greasing & overhaul. ( 2 skilled + 2 unskilled) x 2shift x 2 days for 01 pump

Repairing of shaft welding electrode XUPER 680CGS04mm

Repairing of shaft XUPER680NH04mm

Repairing of shaft welding charges

Repairing of shaft machining charges

Repairing of shaft key way cutting

Repairing of Impeller (for 4 nos) welding electrode XHD2800 04mm

Repairing of Impeller (for 4 nos) welding charges

Repairing of Impeller (for 4 nos) machining charges

Repairing of Impeller (for 4 nos) Dynamic balancing charges L.S.

Repairing of bearing housing both side for 1 no rotating assly costing for one side C.I. machineable electrodes XUPER 2240 04mm

Repairing of bearing housing both side for 1 no rotating assly costing for one sidewelding charges

Repairing of bearing housing both side for 1 no rotating assly costing for one sidemachining charges

Providing & Fixing coupling bush of approved quality as per instruction of EIC.

Providing & fixing coupling bolt of standard quality as per instruction of EIC

Providing grease of standard quality for pump and motor

Providing/supply of spare parts of kirloskar make for monoblock DSM-2, DSM-3 and DSM-5 as given below:Coupling-DSM-3

Providing liquid chlorine solution, sodium hypochlorite based formulated confirming to IS-11673:1992 Grade-I and 10500-1991 for treatment of potable water.

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Clearing of toilet (floor area upto 10 sqm) including cleaning of dado, skirting, WC pam(indian type/western type), washbasin, urinals, glass shelves, mirror and other fittings, if any for D type or equivalent Quarter including any other wash basin outside the toilet by hand dusting and cleaning with soap solution acids, deodorants, phenyl etc. to make the toilet clean & hygienic all complete with tools, tackles & consumables as per intruction of ELC

Cleaning of toilet (Floor area upto 8 Sqm) including cleaning of dado, skirting, WC pan (Indian type/western type), wash basin, urinals, glass shelves, mirror and other fittings, if any for "C" type or equivalent Qtrs. including any other wash basin outside the toilet by hand dusting and cleaning with soap solution acids, deodorants, phenyl etc.to make the toilet clean & hygienic all complete with tools, tackles & consumables as per instruction of EIC.

Cleaning of toilet attached with hostel rooms, office chamber etc. including cleaning of floors, skirting & dado , WC pan (indian/european type ), wash basins, shelves, mirrors and other fitting ,if any , by hand dusting and cleaning with soap solution ,acids, deodorants, phenyl etc. to make the toilet clean and hygienic including providing naphthalene balls in urinal complete with all tools ,tackles & consumables as per instruction of EIC .(for community & service buildings.)

Cleaning of general/common toilet including cleaning of WC pan (indian/european type ), wash basins, urinals by hand dusting and cleaning with soap solution ,acids, deodorants, phenyl etc. to make the toilet clean and hygienic including providing naphthalene balls in urinal etc complete with all tools ,tackles & consumables as per instruction of EIC .

collection of garbage from door to door disposal of the same through closed vehicle or other suitable arrangement enabled with GPS system for tracking to the specified place within lead of 1KM including sweeping of stair case (for 1st and 2nd floor qtrs.) with all tools and tackles as per instruction of EIC. Ground floor.

collection of garbage from door to door disposal of the same through closed vehicle or other suitable arrangement enabled with GPS system for tracking to the specified place within lead of 1KM including sweeping of stair case (for 1st and 2nd floor qtrs.) with all tools and tackles as per instruction of EIC. First floor.

collection of garbage from door to door disposal of the same through closed vehicle or other suitable arrangement enabled with GPS system for tracking to the specified place within lead of 1KM including sweeping of stair case (for 1st and 2nd floor qtrs.) with all tools and tackles as per instruction of EIC. Second floor.

Disposal of dead animal including transportation to the specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime bleaching power etc. and refilling the pit with earth all complete with tools,tackles and consumables as per instruction of EIC. Big animal (Cow, Buffalo, Ox and the like)

Disposal of dead animal including transportation to the specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime bleaching power etc. and refilling the pit with earth all complete with tools,tackles and consumables as per instruction of EIC. Small animal (Dog, Cat,fox, Pig, Birds and the like)

Cleaning of inspection chamber of all size and disposal etc. all specified place outside the colony with all leads including removal & replacing of top cover, mending the damages of cover and chamber, if any etc. as per instruction of EIC.

Cleaning of sludge line and traps (kitchen & toilets) of all diameters at different floor including opening of joints, cleaning of pipe line and again jointing &flushing with fresh water all complete with tools & tackles as per instruction of EIC.

cleaning of choked sewer line & sludge line of all dia meters including removal of earth opening of joints, cleaning of pipe line, making joints leak proof etc. all complete including disposal of sludge materials outside the colony with all leads at specified place with tools & tackles as per instruction of EIC.

cleaning of roof top water tank, including draining out water,cleaning,disinfecting the tank by bleaching powder etc. and washing the tank with fresh water, writing of cleaning date with paint on the outer face of tank all complete with tools ,tackles & consumables as per instruction of EIC .

Cleaning of all types of roof including removal of dry leaves, weedings and cleaning dram holes, brooming etc. all complete with tool and tackle and stacking the garbage at specified place as per instruction of EIC

Cleaning of ground water reservoir including scraping of stains and muck from wall & floor and removal of muck from reservoir, disinfecting the tank by lime/bleaching powder etc. and washing the tank with fresh water, writing the cleaning date with paint on the outer surface of the tank all complete with tools, tackles and consumables as per instruction of EIC

Cleaning, mopping & washing of floor of public building/ other places neatly with detergent/bleaching powder etc all complete with tools, tackles and consumable to make the floor clean & hygienic as per instruction of EIC

Cleaning of door shutters, window shutters including chowkhats, window grills, glass panes, cobwebs etc. of service/community buildings with necessary detergents, chemicals etc. complete as per instuction of EIC

Brooming & cleaning of all roads in colony and within the premises of service building and other places as required with all tool and tackle and stacking the garbage at specified place as per instruction of EIC

Cleaning of surface drain including disposal of muck/sludge through trolley orm other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools & tackles as per instruction of EIC . A) upto 300 mm wide

Cleaning of surface drain including disposal of muck/sludge through trolley orm other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools & tackles as per instruction of EIC . A) above 300mm and upto 600mm wide

Toilet Soap

Bleaching powder

Hand wash refill

cost of material/tools/Uniform/safety equipments shoe (4 pair per year) Uniform & tools and tackles ( 4 set per year) Gloves and mask (48 set per year) Helmet ( 4 n0 per year) bacteria for culture/ decomposition of biodegradable waste ( 144 litres per year)

Transportation cost for disposal of dry waste from krishnashia to near by cement plant (i.e Dala)

Operation cost solid waste processing by transformation of solid waste including kitchen waste ti bio degradable nature (solid compost and liquid fertilizer) this will include fine segregation as per requirement and further cutting of grass, leave etc and segregation of kitchen waste and making it in properform of decomposting, decomposting of solid waste, composting of de-compost material using aerobic/bed/drum composting, drying and sieving of prepared compost, packaging in bags for solid compost and in canes for liquid ferlizers etc all works as per instruction of site in-charge. other misc work/requirement to complete the above mention solid compost/liquid ferlizer preparation project coordinator/ supervisor (1 no per day), chawkidar/guard (1 no per day) unskilled worker/ labours (2 nos per day)

Anti Adult Measures- General disinfection/Pest control with new generation odorless, colorless insecticides which should be safe for human being and effective for all kind of house hold insects like mosquitos, house flies, etc. using residual spray of deltamethrin 2.5 % SC flow (K-othrine or approved equivalent). Insecticides should be sprayed uniformly over the surface of walls, celling, etc. Frequency-once in 3 months

Anti Adult Measures-General disinfection/pest control with a new generation odourless,colourless insecticides which should be safe for human being and effective for all kind of household insects like mosquitos,housefliesetc.Using residual spray of Cyfluthrin 5% EW(Solfac EW OSO or approved equivalent).Insecticides should be sprayed uniformly over the surfaces of wall,ceiling,etc.Frequency -once in 3 month

Thermal Fogging- Using insecticide Deltamethrin 1.25% ULV (kingfog or approved equivalent) mixed with Diesel in the ration of 1:199, for outdoor operation of coloney, etc. Frequency- Monthly

Anti Larvae Measures- Treatment by using Diflubenzuron 25% WP (Bi-larv or approved equivalent) solution to be spread as per instructions of EIC. Frequency -Weekly

Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment).

Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm

Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 60 cm dia, and 60 cm deep

Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Permanent office accommodation. (as per yard stick 1Mali =1.25Acre)

Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge. Trees for 250 no/(up to 4 & up to 3 year Slow & Fast growing group)

Complete maintenance of shrubs (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.

Maintenance of potted plants Cement pots at ground floor in flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required (Materials shall be provided by the department) as per direction of officer in charge (For of Cement pots 300 Nos)

FOLIAGE AND SHADE LOVING PLANTS Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in-charge.

FOLIAGE AND SHADE LOVING PLANTS Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

FOLIAGE AND SHADE LOVING PLANTS Providing and displaying of Croton Baby Golden Punctatumaureum plant, having ht. 23 cm to 30 cm, well developed with fresh and healthy foliage in 15 cm size of Earthen pot / Plastic pot. as per direction of the officer-in- charge.

FOLIAGE AND SHADE LOVING PLANTS Providing and displaying of Croton petra Banglore variety plant, having ht 45 cm & above, well developed with fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in-charge.

FOLIAGE AND SHADE LOVING PLANTS Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

ORNAMENTAL PLANTS Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.

ORNAMENTAL PLANTS Providing and Displaying Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge.

GROUND COVERS PLANTS Providing and Displaying of Euphorbia milli hybrid variety plant, having ht.30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in- charge.

TREE PLANTS Supply and stacking of Bottle palm plant of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.

SHRUBS Supply and stacking of plant Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pots of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of plant Thuja compacta of height 45-60 cm., well branched in earthen pots of size 25 cm as per direction of the officer-in-charge.

Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Balsum seedling

Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Cosmos hybrid

Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Gaillardia Double

Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Kochia

Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Vinca Hybrid

Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Zinnia hybrid

supply of fertilizer, pesticidsDAP

supply of fertilizer, pesticidsUREA

supply of fertilizer, pesticids BONEMEAL

supply of fertilizer, pesticids ROSE MIXTURE

supply of fertilizer, pesticids NEEM CAKE

supply of fertilizer, pesticids ROGAR 30%

SARSO KHALLI

Painting of flower pots as per instructions of EIC Mosaic pots of 15" size with enamel paint of approved brand '

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Play grounds / Public parks (as per yard stick 1Mali =2.00Acre).

Providing and displaying of Croton Duck foot (Elite) plant, having ht. 45 cm and above with 3 to 4 branches, well developed, fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge.

Supplying, P&F deck roller blind complete in all respect

Supplying, P&F deck verticle blind complete in all respect

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be madeseparately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling thejoints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be supplied by the department free of cost).

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Supply and pasting of high intensity retro reflective sheet of different colours and shades as per instruction of EIC High intensity retro reflective sheet as per IRC 67-2001

Providing and pasting reflective self adhesive vinyl sticker letter/number/shapes cut on computer driven plotter, pre spaced, and placed onto a pre masked transfer tape and shall be made from 3M series 3400 engineer grade reflective sheeting. Design of letter/number/shape and colour shall be pre approved by engineer in charge

Petty carpentary repair works such as repairing of cupboard, nails screw fixing hinges tightening of doors and windows shutter etc. as & when required as per instruction of EIC.

Labour rate for small petty water supply repair work such as fixing of washer in bib cock, stop cock, adjusting of foot valves of cistern, fixing of water supply fitting such as GI nipple, socket, tee, plug, union, elbow etc. as and when required as per instruction of EIC.

Operation of pump & motor and submersible pump at Township Krishnashila & GM Office by engaging 7 Nos.(5 Nos. semi skilled + 2 No. unskilled) labourers per day as per following arrangement. i). Ist shift:3 No. ii). 2nd shift:3 No. iii). 3rd shift : 1 No. All complete as per instruction of EIC.Deduction will be made at double rate in case of non/less deployment of labour on prorata basis.

Providing round the clock security guard without gun for watch & ward of Government premises and its all belongings by deploying neatly dressed security guards in 8 hour's shift including necessary T&P like torch, lathi and uniform etc.complete,as per the direction of Engineer-in-charge. (One job means 8 hour's duty).

Facility Manager for heading the entire facility team of Office and Residential Complex and Single point of contact & overall in charge of FM On-site Operations and reporting to engineer-incharge or his representative. (01 No.)

Asst. Facility Manager (Technical) for supporting Critical Services Operations & reporting to Facility Manager. (1 nos. A.F.M.)

Day to day maintenance of electrical wiring, other safety electrical equipments in shifting quarters, Service Buildings and other miscellaneous works (as and when required) in offices/service buildings and township of Krishnashila Project for 150 days.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable (Make-Havells, Anchor, Polycab or equivalent) in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required (Make-Havells, Anchor, Polycab or equivalent)

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire) (for Light and Fan Point) (Make-Havells, Anchor, Polycab or equivalent)

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire) (for Light and Fan Point) (Make-Havells, Anchor, Polycab or equivalent)

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

2 way 5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Bell push

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing of Single pole 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40 A, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63 A, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 12 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Providing and fixing of service line connection with 10 sqmm, 4 Core Aluminium unarmoured cable.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal/ coke and salt) as required.

Providing and fixing 100 A, 4 Pole, 30 KA rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Providing and fixing 100 A capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.

Providing and fixing 200 A capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.

Supply, installation, commissionig and testing of 1 ph, 230 V, 2 HP DOL Submersible Pump Starter of make- Havells/Equivalent with HSN Code- 8536, suitable at 200 V - 400 V coil voltage with all the necessary protective devices inbuild in it.

Supply, installation, commissionig and testing of 3 ph, 440 V, 7.5 HP ASD Submersible Pump Controller starter of Submersible Pump Starter with make- Havells/Equivalent with HSN Code- 8536, suitable for 260 V - 440 V with all the necessary protective devices inbuild in it.

Supply of AC Box With 20A SP MCB & 3 Pin Socket of standar make and specifications as per instructions of EIC.

Supply, installation, commissionig and testing of 24 Hour Analog Time Switch (SST* - 15 min) HSN Code - 9107 of make havells/equivalent as per instructions of EIC.

Supplying and fixing of 63 A, 30 mA rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply and fixing of Copper Busbar Chamber of 200 A Rating, wall mounted, 8 Way on location specified by EIC as per requirement.

Supply and fixing of surface mounting plastic box for switch and sockets, of diiferent size of standard make with cover plate of same size.

3 Module

4 Module

6 Module

8 Module

12 Module

Supply and installation of 2 core, 6 sqmm PVC insulated cable of make-Havells/Equivalent with FR PVC, round sheathed, copper conductor (flexible) industrial cable, 1100 Volts, conforming to IS694

Supply and Fixing of 10 Sqmm, 4 Core, 1100 V Garde, Flexible Copper cable for power supply of different residential quarters and service buidlings as and when required basis.

Supply and Fixing of 10 Sqmm, 2 Core, 1100 V Garde, Flexible Copper cable for power supply of different residential quarters and service buidlings as and when required basis.

Supply and Fixing of Ding Dong wireless and polyphonic call bell with batteries.

Supply and fixing of Square shape, 20 Watt, 200 MM X 200 MM X 27 MM LED recessed mounted Ceiling Light "Trim LED Panel Square" of make Havells of 6000 K and 4000 K Color Temperature, Warranty minimum 2 years, Polycarbonate Material or equivalent make having same specifications as specified including cutting of board, connections in pre-existing electircal wire circuit, finishing to look good and including contractor Profit.

Supply and fixing of Square shape, 24 Watt, 287 MM X 287 MM X 18 MM LED recessed mounted Ceiling Light "Octane LED Panel Square" of make Havells of 6500 K Color Temperature, Warranty minimum 2 years, Polycarbonate Material or equivalent make having same specifications as specified including cutting of board, connections in pre-existing electircal wire circuit, finishing to look good and including contractor Profit.

Supply and fixing of Square shape, 36 Watt, 580 MM X 580 MM X 38 MM LED recessed mounted Ceiling Light "Octane LED 2 X 2 Panel" of make Havells of 6500 K Color Temperature, Warranty minimum 2 years, Polycarbonate Material or equivalent make having same specifications as specified including cutting of board, connections in pre-existing electircal wire circuit, finishing to look good and including contractor Profit.

Hiring of 12/14 ton crane for material handling like shifting of Transformer, Shed, Motor etc. in Township (including Diesel charges) on as and when required basis as per Instructions of EIC.

Hiring of 01 No, 5 KVA Generator for power supply backup in official programs and meetings in township on as and when required basis as per Instructions of EIC.

Hiring of 01 No, 7.5 KVA Generator for power supply backup in official programs and meetings in township on as and when required basis as per Instructions of EIC.

Supply and Fabrication of Tees, Angle and Channel for different purposes as per Instructions of EIC on as and when required basis with welding work (if required).

Supply and Fabrication of 100 mm GI Pipe for underground cable laying and other purposes as per Instructions of EIC on as and when required basis with welding work (if required).

Supply and Fabrication of 150 mm GI Pipe for underground cable laying and other purposes as per Instructions of EIC on as and when required basis with welding work (if required).

Supply and Fiximg of 3 pole, MNX 80 contractors , Coil voltage 240/440V, 1 NO,1NC conforms to IS/IEC 60947-4-1 , Range-80A, in Pump house starter

Supply and Fixing of 3 pole ,M/L 6 Contactor, Coil voltage 240/440V, Range 110A, 2NO, 2NC in Pump house starter,street lighting starters,&Tower lights starters

Supply and Fixing of MNX 18 contactor, Range 18A, Coil voltage 240/440V, 1NO,1NC conforms to IS/IEC60947-4-1i in fountain pump starters

Day to day maintenance of various types of residential quarters, service buildings and power supply distribution system for 150 days at Krishnashila Project.

Day to day maintenance of various types of residential quarters, service buildings and power supply distribution system: This includes: • Maintenance of power supply & distribution system in the township. • Maintenance of LT Overhead lines. • Maintenance of HT Overhead lines (GM Office Feeder, Township Feeder, Service Building Feeder etc). • Maintenance of power transformers, MCCB’s, feeder pillars, bus bars, cables, service lines, main switches, street light. • Day and day electrical maintenance in residential quarters like fixing of switch, socket, angle holder, boards, tube light, fan, distribution wiring, connection from poles within quarters etc. • Rectification of No Power complaints. • Minor Works likeloading unloading of items, maintenacne of sub station, cleaning of sub station, cable laying, trench making, tree trimming, grass cutting etc. on as and when required basis.

Day to day maintenance of Air-Conditioners installed at various locations of Krishnashila Project for 150 Days

Normal servicing of AC and removal of dust with dust blower and jet water spray.

Complete servicing of AC and removal of dust of indoor and outdoor unit with jet water spray.

Checking of leakage and Gas Charging

Supply of Gas R-32 or other as per instructions of EIC.

Supply of Gas R-22 or other as per instructions of EIC.

Repairing of PCB

Supply and Fixing of Running Capacitor 50/55 mf

Supply and Fixing of Copper Pipe 1/4"

Supply and Fixing of Copper Pipe 1/2"

Supply and Fixing of Contactor Relay

Supply and Fixing of Sensor

Supply and Fixing of New PCB

Supply and Fixing of AC filter net

Supply and Fixing of Indoor motor

Supply and Fixing of Indoor blower

Supply and Fixing of Outdoor Fan

Supply and Fixing of Outdoor Motor

Supply and Fixing of Compressor of 1.5 T AC

Supply and Fixing of Condenser Coil

Supply and Fixing of ODU Motor

Supply and Fixing of AC Outdoor Unit Stand

Supply and Fixing of Drain Pipe

Installation, Dismantling and vice versa of window/split AC of 1.5 T, 2 T etc. As per instructions of EIC.

Supply and Fixing of 1.5 Ton Split Air Conditioner indoor and outdoor unit cover of Weatherproof covers made from high tensile polyester material

Day to day maintenance of Water Cooler and Refrigerator units installed at various locations of Krishnashila Project for 150 days

Supply and Fixing of Water Cooler Compressor

Supply and Fixing of Water Cooler Tank Coil

Water Cooler Gas Charging

Water Cooler Service Charge

Supply and Fixing of Refrigerator/Deep Freezer Compressor of Make and Model as per site of 250 L and above as per instructions of EIC

Supply and Fixing of EVAP Fan Motor for water coller & Refrigerator

Gas Refilling R 134

Supply and Fixing of Defrost PCB

Supply and Fixing of Relay OLP

Supply and Fixing of Sensor

Service and Labour Charges

Repairing, Rewinding, Greasing, and Maintenance of Ceiling Fans installed at various types of Residential Quarters & Service Buildings of Krishnashila Project for 150 Days

Dismantling and installation of Ceiling Fan.

Rewinding of Ceiling fan with super enameled copper wire of suitable gauge after clearing of damaged / burnt winding including greasing checking etc. compete in all respect.

Supply and fixing of Main shaft of Ceiling Fan.

Supply and fixing of copper bush of different size suitable to existing / rewound ceiling fan of different size and make.

Supply and fixing of rubber bush

Supply and fixing of sealed ball bearing like 6201, 6202, 6203, 6204 of reputed, makes- SKF, FAG, NBC, Timken only suitable to existing / rewound ceiling fan of different size.

Supply and fixing of Connector of different size suitable to existing / rewound ceiling fan of /different size and make.

Supply and fixing of Down Rod of different size suitable to existing / rewound ceiling fan of /different size and make.

Supply and fixing of capacitor 2.5 mfd 440 Volt as per ISI Specification.

Supply of Nut Bolt & Chira Pin

Repairing, Rewinding, Greasing, and Maintenance of Exhaust Fans installed at various types of Residential Quarters & Service Buildings of Krishnashila Project for 150 Days

Repair, Rewinding and Maintenance of 300 mm Sweep Size Exhaust Fan as per nature of complaint

Copper Wire 320 gm each for rewinding

Bearing set

Blade

Condenser 2.5 Mfd

Shaft and Bush

Labour Charges

Contractor Profit

Repair, Rewinding and Maintenance of 200 mm Sweep Size Exhaust Fan as per nature of complaint

Copper Wire 220 gm each for rewinding

Bearing set

Blade

Condenser 2.5 Mfd

Shaft and Bush

Labour Charges

Contractor Profit

Jhallar Lighting in Township on various occasions as and when required basis for 150 days.

Jhallar lighting in GM Office

Jhallar lighting in Officer's Club

Jhallar lighting in Worker's Club

Jhallar lighting in Khel Bhawan near Officer's Club

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information