SPL REPAIR TO COOK HOUSE AND FLOORING IN SM BK PROVN OF PCC PATH FROM BLDG NO 206 TO MAIN ROAD OF FD WKSP AND PROVN OF SHED AT BRIGADE CANTEEN STORES DEPARTMENT AT CHAUBATTIA UNDER GE RANIKHET

Amount

BOQ( Sch 'A") B/R Portion Dismantling plain or corrugated steel sheeting, any gauge, hickness including Nainital or similar pattern roof covering complete all as specified and directed

Supply & fixing galvanized, corrugated, mild steel sheeting 0.63mm thick with two corrugations side lap, having zinc coating @ 120 gram per sqm on both sides, fixed with L-type or J-type or cranked hook bolt and washers in roofs, walls etc. complete all as specified and directed.

All as per item No 2 above but except sheets complete all as specified and directed. (Note :- Old serviceable sheets obtained from item No 01 above shall be reused)

Supply & fixing of 0.63 mm thick plain galvanised iron steel (PGI) sheeting including cover gola of same thickness PGI sheet as in Nainital or similar pattern roof covering ( to be provided as per the existing pattern to match with same side by side) having zinc coating @ 120 gram per sqm on both sides fixed with flat iron clip of size 20x3 mm complete all as specified and directed.

Supply & fixing 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with 'L' type and 'J' type or cranked hook bolts in roof and wall including taking down and making good complete all as specified and directed.

Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor and rubbish off the premises complete all as specified and directed.

Material & Labour for screed bed or bedding layer 15mm thick in cement mortar(1:6) for laying floor finishes complete all specified and directed.

Material & labour for Non skid ceramic tiles 7 to 8mm thick coloured of area of each tile exc 0.11 sqm but n exc 0.18 sqm each (size 400mmx400mm) in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile over with and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Material & Labour for 25 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in base, complete all as specified and directed.

Material & Labour for non skid ceramic coloured tiles 7 to 8mm thick square or rectangular area of each tiles exc 0.18 sqm but not exc 0.36 sqm as in floor etc and jointed in cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick quare or rectangular area of each tiles exc 0.18 sqm but not exc 0.36 sqm as on vertical surface / skirting etc set and jointed in neat cement slurry and pointed in white or colour cement of wall finishing with and including cement mortar 1:4 complete all as specified and directed

Supply & fixing in repairs mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

Material & labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 for backing of Dado/ Skirting and finishing the surface even and rough complete all as specified and directed.

Material & Labour for glazed ceramic coloured / printed tiles 300mm x 200mm, 6 to 7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles, complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

Supply & Fixing for powder coated GI ceiling grid system of grid size 600 X 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the following sections complete all as specified and directed:- (i) Maint Tee 28mmx24mmx3mm thick, (ii) Cross Tee 28mmx24mmx3mm thick and (iii) Wall angle 24mmx24mmx3mm thick.

Supply & Fixing 4 mm thick disigner ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Supply & Fixing 25 mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with nails in any situation complete all as specified and directed

Supply & Fixing 40 mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with nails in any situation complete all as specified and directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position, framed work complete all as specified and directed.

Material & Labour for Timber framed and fixed second class hard wood clean swan as in scantlings complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Supply & Fixing rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and similar work conforming Fe 410-w (Gde-E-250) quality-A complete all as specifies and directed

Supply & Fixing 300 mm long (Length of bolt) mild steel sliding door bolts plate type stove enamelled blackwith bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts four on bolt plate and two on staple plate complete all specified and directed.

Supply & Fixing in repairs floor door stopper of chromium plated body with rubber shoe fixed in door, overall length of cover plate 140 mm Complete all as spcified and directed

Supply & fixing mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames incl punching or drilling out glazing pins/spring clip and providing and fixing new ones complete all as specified and directed.

Supply & fixing Sheet glass 3mm thick, figured, pin headed, and glazing with beads in squares n. exc 0.50 Sqm in each pane complete all as specified and directed.

Supply & fixing Sheet glass 3mm thick, ordinary quality and glazing with oil putty or fixed with beads in squares n. exc 0.50 Sqm in each pane complete all as specified and directed.

Material & Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of new surfaces complete all as specified and directed.

Material & Labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

Material & Labour for Preparation of old painted steel iron, PGI/CGI Sheet surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & Labour for painting to new steel and iron surfaces Sheet of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new surfaces complete all as specified and directed.

Material & Labour for applying 2 coat white wash on old surfaces of wall incl preparation complete all as specified and directed.

Supply & Fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking down wooden chowkhat or frame area not exc 1.5 sqm each with shutter (without taking off shutter from frame) complete all as specified and directed.

Taking down wooden chowkhat or frame area exc 1.5 sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) complete all as specified and directed.

Supply & Fixing 2nd class Hard Wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, and making good to match with existing surface complete as specified and directed.

Supply & Fixing 35 mm thick(batten thickness ) IInd class hard wood, plain framed, panelled shutter (Any numbers of pannel) of with pannel of timber flat on both sides (feather edges) or 12 mm thick veneered particle board medium density wood particle board with commercial face veneers complete as specified and directed.

Supply & Fixing 35 mm thick Second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze without sash bars, edges of framing plain fitted with cut and mitred beads for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(a) fitted to chowkats, complete as specified and directed.

Supply & Fixing 30 mm thick Second class hard wood Glazed and skeleton window , ventilaors shutters, open rebated and prepared to receive gauze without sash bars, edges of framing plain fitted with cut and mitred beads for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkats, complete as specified and directed.

Supply & Fixing 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete as specified and directed.

Supply & Fixing 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply & Fixing butt hinges, medium weight, stainless steel and fixed, size of hinges 75mm complete all as specified and directed.

Supply & Fixing butt hinges, medium weight, stainless steel and fixed, size of hinges 100mm complete all as specified and directed.

Supply & Fixing 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Supply & Fixing 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc complete all as specified and directed.

Material & Labour precast cement concrete 1:3:6 type C1(using 20 mm graded stone agg) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.

Material & Labour for brick work using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

Supply & Fiixing GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends, tees, short pieces, connectors, elbows, reducers,union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

Refixing of old 15 mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed

Supply & Fixing GI water tubing of 20 mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends, tees, short pieces, connectors, elbows, reducers,union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

Refixing of old 20 mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc complete all as specified and directed.

Supply & Fixing in repair Bib tap 15mm cast copper alloy, bright, crutch or butter fly handle screwed down, fancy type chromium plated for iron pipes complete all as specified and directed.

Supply & Fixing in repair 15mm stop valve / angle valve, cast copper alloy screwed down high pressure with crutch or butter fly handle of fancy type chromium plated screwed both ends of, complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m complete all as specified and directed.

Material & Labour for rendering 15 mm thick on fair faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement incl, mixing of water proofing compound of approved make complete all as specified and directed. ( Note WPC shall be measured and paid for separatly)

Supply only Integral water proofing compound complete all as specified and directed

Material & Labour for rendering 15 mm thick on fair faces of brick work or stone masonry or concrete surfaces in cement mortar 1:6 and finished fair and even complete all as specified and directed

Material & Labour for applying three coat of white wash on new undecorated surface incl Preparation of new plastered surfaces of wall complete all as specified and directed.

Material & Labour for applying two coat of cement based paint on new plastered surfaces of wall including preparation complete all as specified and directed

Supply & Fixing vitreous china wash basin Ovel type size 550x400mm white excluding taps , waste but including brackets as in repair, complete all as specified and directed.

Supply & Fixing in repairs 15 mm bore pillar taps, Cast Copper alloy,fancy type with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) complete all as specified and directed.

Material & Labour for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement laid in bays including necessary form work complete all as specified and directed.

Material & Labour for cement concrete 1:3:6 type C-2 (40 mm graded stoe aggregate)as in surface channel/drain including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

Material & Labour for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position in beams shelves and similar works including reinforcement cut as required to facilitate demolition complete all as spec ified and directed.

Material & Labour for RCC (Nominal mix) as in shelves, beams etc, type B1 1:2:4 (20mm graded crushed stone aggregate) complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or beams, shelves and similar work rough finished surface of concrete complete all as specified and directed.

Supply & Fixing MS TMT Steel bars 6mm to 8mm dia, as in shelves cut to length, bent shape repuired, incld cranking bending spirally for hooking for columns, hooking ends and binding with and incld mild steel wire not less then 0.9mm dia or securing with clips quality complete all as specified and directed.

Surface excavation in soft/loose soil n.exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Material & Labour for hardcore of gauge n exc 63 mm of broken stone deposited spread and levelled in layers n exc. 15 cm thick watered and rained to a true surface complete all as specified and directed.

Material & Labour for 100 mm PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in hardstanding / pavings laid in bays including necessary form work complete all as specified and directed.

Removing excavated soil exc 1.50 km but n.exc 5.00 km and depositing where directed complete all as specified and directed.

Material & Labour for forming constr joint 30mm deep x 10 mm wide filled with sealing compound grade 'A' complete all as specified and directed.

Finishing surface of concrete roads, pavements by brooming complete all as specified and directed.

Supply & Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Material & Labour for PCC type D2 1:4:8 (using 40 mm graded stone aggegate ) as in foundation filling and mass concrete complete all as specified and directed.

Excavation in trenches n.exc.1.5M wide and n exc 1.5 M in depth for foundation in hard / dense soil and getting out all as specified and directed.

Removing excavated soil to a distance n exc. 50 m and depositing where directed at a level not exceding 1.5 M above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Surface dressing n exc 15 cm deep in hard / dense soil all as specified and directed

Material & Labour For 75mm thick Cement concrete type D-2 1:4:8 (using 40 mm graded stone aggegate ) as in sub base course complete all as specified and directed.

Material & Labour for 50 mm thick Cement concrete type B-1 1:2:4 (using 20 mm graded stone aggegate ) in base course complete all as specified and directed.

E/M Portion Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc and making good disturbed surfaces of walls etc, as per existing finishes by plastering, repairs and white / colour/ distempering etc complete all as specified and directed

Supply & fixing point wiring for one light point/ fan point/ bell point / 5Amps socket out let (independent)point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100 volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit ISI marked (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and white wash/colour wash/distempering the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed ( Note:- wiring shall be done in colour coding)

All as per item No.94 herein before but controlled by two way switch

All as per item No. 94 herein before but one socket outlet 5 Pin 5 Amps controlled by one switch on the same board.

All as per item No. 94 herein before but one socket outlet 5 Pin 5 Amps controlled by one switch on independent board.

All as per item No. 94 herein before but wiring with 2.5 Sqmm copper wire (FRLS) PVC and 1.5 Sqmm earth wire for socket outlet 6 pin 16 Amps on independent board.

Suppy & fixing switch piano flush type single pole, two way 6 Amp complete all as specified and directed.

Suppy & fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & fixing socket out let multi 5 pin 5 Amps, flush type complete all as specified and directed.

Suppy & fixing switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & fixing socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply and fixing ceiling rose, PVC / polycarbonate, isolated body three terminal complete all as specified and directed.

Supply & fixing lamp holder angle type PVC / polycorbonate type insulated body with back plate suitable for batten / angle fitting complete all as specified and directed.

Supply and fixing High quaity LED light fitting 1x20 W,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. (i) Make Havells Cat Part No. REGAL BATTEN T8 UPTO1X22WDSBSWH (ii) C&S Cat Part No. LTIC00120WLED/WD, (iii) Crompton Cat Part No. LCTL-18-CDL incl LED tube light with G-13 lamp holder 20W

Supply and fixing LED Bulb 9 Watt complete all as specified and directed.

Supply & Fixing in repair MCB single pole, 240 volts, 5 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type in the MCB DB including taking down complete all as specified and directed.

Supply & Fixing in repair MCB single pole and neutral, 240 volts, 32 Ampere, rupturing capacity 10 KA, including taking down complete all as specified and directed.

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing sheet metal enclosure single pole and neutral with a 2 pin & earth plug and socket complete with one single pole MCB 240V 20 Amp complete all as specified and directed .

Taking down old unserviceable submain wiring and Supply & Fixing sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 6 Sqmm size cables, PVC insulated stranded copper conductor fixed in and including PVC conduite pipe 25mm dia ISI marked with all accessories and one continuous run of 4.0 Sqmm copper conductor PVC insulated stranded copper conductor. (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

Material & Labour for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with and testing complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

Supply & Fixing LED street light fitting 60W, 230V AC outdoor type with high pressure die cast aluminium IP66 roadway luminaire with high power LED as light source and electronic driver including GI bracket light grade with impact and corrosion resistant including thermal management in multiple optics and provn of electric supply to fitting from source by means of PVC Sheathed multi-stranded aluminium conductor cable complete including taking down existing old light fitting any type all as specified and directed. (i) Make Havells Cat Part No. ENDURAPEARLNEOSL60WLED757PASYTOPC, (ii) C&S Cat Part No. INDUS-i/60W, LTESSI60WLED (iii) Crompton Cat Part No. LST-60-CDL-M

Supply & Fixing LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser including LED light driver holder, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. Note:- Contractor shall submit 2 year warranty of material from manufracturer alongwith purchase voucher. (i) Make Havells Cat Part No. HEXAFT 10W LED857SSYMBPOC (ii) C&S Cat Part No. e-TATRA/10W, (iii) Crompton Cat Part No. LMHE-10CDL

Supply and fix High quality LED lighting fixture mirror type with high output diffuser 2 feet 1x 10 Watt. 220V AC,complete with polycarbonate tube, white/warm white suitable for mirror light internally pre wired of 1.5 sqmm three core flexible cable complete all as specified & directed. (i) Make Havells Cat Part No. LUMILINEPLUSBS10WLED865SPCSS, (ii) C&S Cat Part No. LTTB2F10WLED/W, (iii) Crompton Cat Part No. LDLL10-CDL

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep heavy duty with, blades, and frame and louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 450 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

Taking down storage type water heater (geyser) of any type /make up to 50 Ltr capacity after disconnecting electric / water connections and refixing the same after carrying out necessary repairs including reconnecting the electric / water connections and testing complete all as specified and diected.

NK CONSTRUCTION

aditya construction