MCEW(Development and repair of Building) for the upgradation of CA office and inspection house at Benisagar Distt west singhbhum

Amount

Execution of works -(As per CPWD specifications 2023 as well as approved by the Competent authority .)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade - mixing with 1:2:4 (1 Cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size.) as per direction of engineer-in-charge

Dismantling doors, windows and clerestory windows (Steel or Wood) shutter, including chowkhats, architrave, holdfasts etc complete and stacking within 50 meter lead

Providing and Fixing Chowkhat in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fast in cement concrete blocks of size 20 x 20 x 20 cm with cement concrete (1:2:4) including disposal of rubbish to the dumping ground all complete as per direction of Engineering-in-charge

Providing and Fixing 30 mm Flush door and Windows (with all accessories) including bright and black enamellled M.S. butt hinges with necessary screw including required sizes, 12 mm beading as per direction of Engineer-in-charge

Brick work, common burnt clay modular bricks with Cement mortar 1:4 (1 cement : 4 coarse sand) as per requirement

Provision for 12 mm Cement plaster for required area with 1:4 cement mortar (1 cement : 4 coarse sand) as per requirement.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing M.S. Grill, M.S.and Door by weilding and similar works, in front of main gate of inspection office including material and labour cost etc all complete as per approval and direction of Engineer-in-charge

Provision for Cleaning, grinding and Mirror polishing work on marble floor where ever required to give high gloss finish complete. as per direction of Engineer-incharge

Providing and fixing of Plumbing work (CPVC Concealed complete inlet Pipes fitting, PVC pipe complete outlet fitting, with rain water pipe, )for Inspection house/office including with all accessories, material and labour cost etc all complete

Providing and fixing all Complete Electric work for Inspection house/office including with all accessories, material and labour cost etc all complete

Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metre lead [ UNIT- M2]

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Provision for Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete

Removing white or colour wash by scrapping and sand papering and preparing the wall surface smooth including necessary repairs to scratches etc complete

Provision for Finishing walls with Premium Acrylic Smooth exterior paint with required additives of required shade two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm as per direction of Engineer-in-charge

Supplying and Installation of (08 Nos) outdoor IP Cameras with 32 inch monitor at Inspection office /main gate area with all necessary instruments and accessories items all complete as per approved design and as per direction of Engineer-in-charge

Providing and fixing double scaffolding system(cup lock type) on the exterior side up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S. tubes M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc and maintaining it in a serviceable condition for the required duration as approved and removing i there after The Scaffolding system shall be stiffened with bracings runners connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per direction and approval of Engineer-in-charge

Provision for window grill Painting with synthetic enamel paint of approved brand and manufacture of required colour to give and even shade Two or more coats including material and labour cost etc all complete

Providing and fixing 02 Nos Stainless steel (304 -Grade) Braille lipi C.N.B. board (Size- 400 mm x 400 mm) Matter writing in Hindi + English language with S.S. stand including Material, Engraving, Transportation, GST and labour cost etc all complete as per approval and direction of Engineer-in-charge

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Providing and installation of 1.5 Ton Inverter A.C.(1 nos) at Inspection office with all necessary instruments and accessories items as per approved brand and as per direction of Engineer-in-charge

Provision for Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform

Provision for Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars

Providing for Purchasingh, Supplying filling spreading & levelling coarse and gravels of size range 1.5 mm to 2 mm in required thickness for all leads & lifts all complete as per direction of Engineer in charge

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

CHANDRA BHUSHAN SINGH (BID ID -3325557)

M/S APR CONSTRUCTION (BID ID -3327016)

Kundu Enterprise (BID ID -3325606)