Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹5.5 LAdmitted-Fee/PreQual/Technical/Finance | -25.00% | ₹5.5 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L1₹5.5 LAdmitted-Fee/PreQual/Technical/Finance | -25.00% | ₹5.5 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | L2₹6.0 L+₹51,359.91 (9.33%)Admitted-Fee/PreQual/Technical/Finance | -18.00% | ₹6.0 L+₹51,359.91 (9.33%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| 4 | L3₹6.9 L+₹1.4 L (25.1%)Admitted-Fee/PreQual/Technical/Finance DHARIARKANDI TILABAZAR UNOKOTI TRIPURA PIN 799281 | UNAKOTI | TRIPURA | 799281 | -6.17% | ₹6.9 L+₹1.4 L (25.1%) | L3 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹7.3 L
EMD Value
₹14,674
Closing Date
5 Aug 2026, 3:00 pmClosed
Chief Executive Officer KMC KLS
O/O the Chief Executive Officer KMC KLS
Construction of Coffee house and park naming at Rabindra Kanan Park ward No 01 under Kailashahar Municiple Council for the year of 2026 27
2026_Urban_75098_1
PNIeT No.05/KLS/MC/2026-27 Sl NO.06
Open Tender
Civil Works
Percentage
120 days
Ward No.01 under KMC
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
₹14,674
6 Aug 2026
30 Jul 2026
5 Aug 2026
30 Jul 2026
5 Aug 2026
30 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | ITEM NO. 01.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-All kinds of soil | - | cum | 231.6 | - |
| 2 | ITEM NO. 02
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete | 1 | cum | 1,177.3 | ₹1,176.12 |
| 3 | ITEM NO. 03
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level:
1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) | 0.32 | cum | 9,938.6 | ₹3,180.25 |
| 4 | ITEM NO. 04
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level:
1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) | - | cum | 10,742.6 | - |
| 5 | ITEM NO. 05
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement
-All work upto plinth level:
1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) | - | cum | 11,080.4 | - |
| 6 | ITEM NO. 06
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement
1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) | - | cum | 333.9 | - |
| 7 | ITEM NO. 07
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more | - | kg | 103.9 | - |
| 8 | ITEM NO. 08
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes | 0.2 | kg | 146.2 | ₹29.24 |
| 13 | ITEM NO. 09
Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTMA792/A792M and AS1397, Alloy coating AZ150/AZ70,colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in singlelength upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfacesexcluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever require and as per direction of Engineer-in-charge.0.50mm thickness | - | mt | 939.2 | - |
| 14 | ITEM NO. 10
Supply & installation of pre-painted Galvalume sheets roofing accessories in 550mpa steel steel grade, made out of Cold rolled steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side etc. complete as per direction of Engineer-in-charge. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. The sheet shall be fixed using self drilling /self tapping screws with EPDM washers completeRidges/Valley/Gutter/Flashing of width 610mm:
0.50mm thickness | - | sqm | 517.9 | - |
stage.html
html • 0.02 MB
finance_76453.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.64 MB
Tendernotice_2.pdf
PDF • 2.92 MB
BOQ_76453.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .