CA NO.CWE BLY/GE (E)/106 OF 2025- 2026SPECIAL REPAIR TO BLDG NO P-227 (12X MD ACCN) IN B CHARGE AT RTS and DEPOT HEMPUR UNDER GE EAST BAREILLY

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust incl. brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tils exc.0.18 sqm but not exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item No 3 but in skirting, vertical surface dadoes and riser etcover and including 10mm thick rendring in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic tiles coloured of size 350 x 450 x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles over and including 10mm thick rendring in CM (1:4) complete all as specified and directed.

M&L for non skid-ceramic tiles coloured of size area of each tile exc.0.06 sqm but not exc . 0.11 sqm (300 x 300 mm) X 6mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to match over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed.

M&L for cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) 25 mm thick as in floor for receiving screed bed of floor tiling complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and directed.

Taking down shutter and refixing with easing cutting or necessary repair in same opening of any description exc. 1 sqm but n.exc 2 sqm each

S&F IInd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned and joints complete all as specified and directed.

S&F pressed steel frame of size 125 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast etc complete as specified made out of 1.25mm thick MS Sheet including making good disturb surface as per existing surface complete all as specified and directed.

S&F pressed steel frame of size 105 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast etc complete as specified made out of 1.25mm thick MS Sheet including making good disturb surface as per existing surface complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) for fixing of hold fast/filling pressed steel door frame including necessary form work complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and directed.

S&F 30mm thick flush shutters, solide core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed.

S&F aluminium handles extruded type of size 125mm, complete all as specified and directed.

S&F 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F in repair 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repair of steel ventilator (with fly froof) with top hung shutter, including hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and directed.

S&F mild steel framed work such as grill grating etc with end of bars shouldered and/or riveted welded or forged into spikes framed guard bars iron doors ladders framed bullesters walk ways railings, frame work of water tanks and similar work confirming to Fe-410 complete all as specified and directed.

S&F galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repair 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F in repair vitreous China water closet Orissa pattern of size 580x440mm , white, with 'P' ro 'S' trap and integral foot rest, front or back inlet and flush pipe of polytheylene 32mm dia for low level cistern including provision of cement concrete bedding complete all as specified and directed.

S&F in repair of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls

as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type complete all as specified and directed.

S&F CP brass Chromium plates angle Stop valves of 15mm bore screwed for 15mm bore iron pipe or union complete all as specified and directed.

S&F, in repair 15 mm bore dia of pipe CP brass fancy type stop cock with long shank, concealed type complete all as specified and directed.

S&F in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted.

S&F PVC connection 15mm size PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair grating square 150mm size of PTMT (minimum 100 gms) complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in reapir for 20mm dia PVC coated Draphary curtain rod decorative wooden finish type over mild steel tubing including brackets complete all as specified and directed.

S&F in repair tubular towel rail, brass chromium plated 20 mm dia `D' type 60 cm long between flanges complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc and 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball including dismantling existing tank complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in stainless steel plate rack complete assembled set of (Size: 31 x 36 x 10 inch) fixed with screws in wall complete all as specified and directed.

S&F in repair stainless steel sink with drainage board, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar 1:4 on to dwarf/parapet wall or fixing with granite with pointing in white or grey cement to match or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removal to stores complete all as specified and directed.

S&F 20 mm bore dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified and directed.

S&F steel tubing 15 mm bore dia medium grade,galvanised with all fitting and fixed complete to on wall or ceiling or laying in floor /ceiling concealed type including all type of fittings complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth on stone, concrete block walls orslab walls etc complete all as specified and directed.

Dismantling of cast iron pipes or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches if required upto 100mm bore including fitting complete all as specified and directed.

S&F 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

S&F 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints, laid in trenches/floor if required or fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bend any radius with or without access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bend any radius with or without access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Junction single equal or un-equal complete all as specified and directed.

S&F 75 mm bore PVC (SWR) Junction single equal or un-equal complete all as specified and directed.

S&F stack clamps out of 75mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable 75mm bore pipe complete all as specified and directed.

S&F stack clamps out of 110mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable 75mm bore pipe complete all as specified and directed.

S&F PVC (SWR) vent cowls suitable for 75mm bore pipe complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of floor, path etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, approved colour and design laid over and including 50mm thick sand cushion and filling of joints complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors and over and including 15 mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 finished on fair faces of brick work or cement concrete surfaces fair and even using integral waterproofing compound complete all as specified and directed. Note:-Supply only of WPC shall be measured and paid separately.

M&L for rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling finishing the surface even and smooth without using extra cement complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 as half brick complete all as specified and dir

ected.

Demolition of reinforced cement concrete as in roofs, slabs, floors(other than ground floors) beams, staircases, landing, chajjas, and similar works reinforcement cut as required to facilitate as demolition complete all as specified and directed.

M&L for RCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in slabs on walls, Chajja, beams and columns in floors, roofs, landings, balconies, selves, canopies, deck slabs and in shelves, Manhole cover, chajja and the like etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and overs, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secured with clips including welding new to old (if required) complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10mm dia in Stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secured with clips including welding new to old (if required) complete all as specified and directed.

All as per above Sch "A" Item No. 109 one 3 pin one light controlled by two way modular switch complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, windows, cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 10 cm but n. exc 20 cm wide rough finished of concrete complete all as specified and directed.

Demoliton of cement concrete of any description & in any position not otherwise specifically provided for and complete all as specified and as directed.

Supply only Integral water proofing Liquid complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 (using 40 mm broken brick aggragates) as sunken sub base of floor fillings including demolition of PCC any type or broken brick with sunken floor complete all as specified and directed.

S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 kg of cement per square metre complete all as specified and directed.

Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and construction fibre as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Water proofing liquid at interval of 8 hours cure for the surfaces complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4, type B-0 (12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and fair (without using extra cement) in slope as required over roof complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 on concrete roof surfaces using water proofing compound @ 3% by weight of cement and finishing the surface even and fair including taking down existing plaster and APP membrane all as specified and directed. Note :- WPC shall be measured and paid separately.

M&L for cool roof antislip tiles of size 300x300x10 mm with high SRI value not less than 90 laid over exiting treatment on accessible roof laid over and including 20mm thick cement mortar screed in 1:4 complete all as specified and directed.

Disconnecting existing Exc 250 but n exc 500 Ltrs tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc. complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming, scraping down, Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated surfaces on walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on walls complete all as specified and directed.

M&L for complete removal of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails and applying of two coat OBD on wall over including a coat of primer applied and a coat of 1mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old wooden based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old old steel surfaces and one coat of synthetic enamel paint complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc complete all as specified and directed.

Taking down main switch / MCB DBs including MCBs etc of any size and making good distrbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and as directed.

M&L for two coat OBD on newly plastered wall surface over including a coat of primer applied including a coat of 1mm thick wall care putty complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for point wiring using proper colour coding complete all as specified with 1.5 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor two single core cable (Red and Black colour) confirming to IS 694:1990 Part-II with and including non metalic rigid PVC Conduit 25mm dia medium grade with all accessories including cutting chases pinning in, for concealed conduit wiring in wall/ceiling/floor/roof etc, making good of disturbed surface not exc 15cm girth, modular sunk pressed steel terminal box not less than 2mm thick, 50mm deep, covered with frame plate with cover for 01 to 16ways suitable for modular fittings including 1.5 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor one single core cable (Green colour) confirming to IS 694:1990 Part-II as continuous earth wire connected to common earth dolly all as specified and as directed for the following:- (a) One light/fan/exhaust fan/bell point controlled by one modular switch/bell push.

All as per above Sch "A" Item No. 109 but one 3 pin modular socket outlet 5 Amp on the same board with other switch complete all as specified and directed.

All as per above Sch "A" Item No. 109 one 3 pin modular socket outlet 5 Amp independent board complete all as specified and directed.

Taking down Ceiling fan/Exhaust fan, sealing cable end,dismantling blades and removing fan and blades to store for keeping in safe custody for BER Board complete all as specified and directed.

Taking down sub main wiring /service cable including earth wire and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed.

S&F modular white cover plate with frame 1 Module complete all as specified and directed.

S&F modular white cover plate with frame 2 Module complete all as specified and directed.

S&F modular white cover plate with frame 3 Module complete all as specified and directed.

S&F modular white cover plate with frame 4 Module complete all as specified and directed.

M&L for modular switch, 1 way 6 Amp, 1 module complete all as specified and directed.

S&F modular white cover plate with frame 6 Module complete all as specified and directed.

S&F modular white cover plate with frame 8 Module complete all as specified and directed.

M&L for modular switch, 1 way 16 Amp, 1 module complete all as specified and directed.

S&F modular socket 6Amp, 2/3 pin, combined 2 module complete all as specified and directed.

S&F modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch, 2 way 6 Amp, 1 module complete all as specified and directed.

S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body of size complete all as specified and directed.

S&F lamp holder (Batten/Angle) PVC/Polycarbonate type with back plate for batten/angle fittings, complete all as specified and directed.

S&F for in replacement Lamp LED ADORE PLUS 1 x 9 Watts, CDL, 3 Star rating, heat sink white with Polycarbonate diffuser, B-22 base cap, retrofit type, 220/230 volts, complete all as specified and directed.

S&F in replacement LED lights fitting 1x 20 Watts (T-8), 4 feet long, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor

cable of suitable size from ceiling rose, prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings complete all as specified and directed.

S&F in replacement LED light fitting 1 x 10 Watts (T-8), Mirror type with high out put diffuser 2 feet long, 220 Volts, AC decorative type with driver holder and LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings, complete all as specified and directed.

S&F modular bell switch 6Amp, 1 module complete all as specified and directed.

S&F in replacement decorative wall light fixture made up of Polycarbonate, suitable for 1 x 9 Watts, retrofit LED lamp, B22 base, CITY-2, 220 Volts, AC, complete all as specified and as directed.

S&F buzzer, ding dong, AC, 230V single pole complete all as specified and directed.

S&F in replacement LED light fitting 1x9W/1X10W Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with LED Lamp 1 X 9/10watts, complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated unsheathed FRLS/FR-LSZH copper conductor 1100 volt grade multistandard conformng to confirming to IS 694:1990 Part-II of size 6.0 sqmm and drawn through & including concealed rigid non metalic PVC conduit not less than 25mm dia medium grade with all accessories fixed on wall/ceiling/surface (ISI marks), one run of 6.0 sqmm copper wire for earth continuity wire and connected of common earth dolly including cutting chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed. Note:- One run of rigid non metalic PVC conduit 25mm dia medium grade, three run of 6.0 sqmm copper conductor is measured as one unit.

S&F ceiling fan 1200mm sweep, complete with blades, down rods and accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including connecting up with three core flexible copper conductor cable for suitable size, complete all as specified and as directed.

S&F in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size and including GI Bracket made out from GI pipe 25/32mm dia bend to shape as required, 1.2Mtr long fixed complete all as specified and directed.

S&F exhaust fan 250mm sweep, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, Copper winding including connecting up with three core flexible copper conductor cable for suitable size and wall mounting fastener bolt, nuts & washers etc, complete all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece- 2 Nos etc, including connecting up with three core flexible copper conductor cable for suitable size and wall mounting fastener bolt, nuts & washers etc, complete all as specified and directed.

Taking down old service connection/ UG Cable removing of site complete all as specified and directed.

S&F sheet metal enclosures MCB SPN DBs 12 Way, 240 Volts, 50Hz, AC, double door (12) suitable for flush mounting and surface mounting, conforming to IP 43 - IK 09 with acrylic door with 200 Amp copper bus bar for phase, complete with din rail, Neutral and Earthing bar, including connection, testing and making good the disturbed surfaces complete all as specified and directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for laying of electric cables or water pipe etc, not exc 10 sqmm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. Note : Rates includes removing of paver blocks carefully and stack properly for refixing after laying of cables .

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for river washed and screened, dry sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I complete all as specified and directed. Note :- Only compacted thickness of sand will be measured and paid separately.

S&F sheet metal enclosures MCB TPN DBs 4 Way, 415 Volts, 50Hz, AC, double door (18) suitable for flush mounting and surface mounting, conforming to IP 43 - IK 09 with acrylic door with 200 Amp copper bus bar for phase, complete with din rail, Neutral and Earthing bar, including connection, testing and making good the disturbed surfaces complete all as specified and directed.

Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 35 sqmm x 3.5 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc complete all as specified and directed.

Supply, laying un-reinforced precast concrete cable cover class LV type 1 flat size 250mm x 150 mmx 40 mm complete all as specified and directed.

M&L for Horizontal directional drilling (HDD) is a streeable trenchless method of Laying (installing) underground cables in a shallow arc along a 40mm/ 50mm bore path by using a surface-launched drilling rig, with minimal impact on the sorrounding area complete all as specified and directed.

M&L for GI pipe, light grade 40mm dia for road crossing of cable for cable protection laid in trenches or above ground surface complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade not less than 0.45 mtr wide for repairing road cut/footpath complete all as specified and directed.

M&L for earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of SSR PT- I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) type B1 cover slab with one handle made out of 8mm dia round bar, watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & charcoal alternative layers, necessary excavation earth work, including earthing test point all as specified or indicated including testing on completion and directed.

Laying only machine pressed precast concrete interlocking paver block any shape and size for repairing road cut/footpath complete all as specified and directed.

M&L in replacement earth continunity conductor or main earth ing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of 4.00 mm dia GI or steel wire complete all as specified and directed.

Supply, laying, conecting and testing of ISI marked 50 mm bore GI steel water tubing medium grade Including S & F all fittings and fixed complete to walls and celling or laid in floors complete all as specified and directed.

Supply, laying, conecting and testing of ISI marked 25 mm bore GI steel water tubing medium grade Including S & F all fittings and fixed complete to walls and celling or laid in floors complete all as specified and directed.