Construction of bridge on Mamer Nallah with approach road Ph-III Halqa Mammer-A Block Ganderbal Scheme Capex PRI Grants 218

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil

P/L, of stone soling 75 mm nominal size duly hand packed with ramming, dressing, watering and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete.

Centering and shuttering incld. strutting ,propping etc. and removal of form work for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.., etc complete.i ncl Columns, piers, abutments, pillars, posts and struts

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20 % plum including all sorts of carriages

Providing and laying in position reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:1.5:3(1 cement : 1.5 coarse sand : 3 graded stone aggregate) 20 mm nominal size .including all sorts of carriages

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and medium tensile steel bars

Providing and fixing of strip seal expansion joint cattering to maximum horizontal movement upto 70mm complete as per approved drawing and standard specification to be installed by manufacturer/supplier as per technical specifications

Providing and laying granular material/RBM backfilling behind abutments, wings etc including stacking and spreading in layers and compactinion etc including all sorts of carriage upto 5 Km bt MT

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two or more coats of paint using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing / Installation / Fabrication of Sign board 3' and 2' ,2mm MS Sheet ,angle iron from 50*50*6 mm thick, 5' height above Ground in Pcc 1:2:4 Mix and cost of photographs

JUNAID AHMAD RAJPUT

M/S LATIF AHMAD WANI

MR. MOHD SHAFI RAINA

AFSHANA MOHAMMAD

MUNEER AHMAD PARRAY