Work

Clearing and grubbing road land including uprooting wild vegetation ,grass ,bushes,shrubs,sapling and trees of girth up to 300 mm

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

WBM Grading 2 -Providing and laying , spreding and compacting stone aggregate of 45-63mm size to water bound macadam specification including spreading in uniform thickness ,hand packing . Rolling with smooth whell roller 80-100 kn in stage to proper grade and camber ,applying and brooming ,stone screening /binding materials to fill up the interstices of coarse aggregate ,watering and compacting to required density Grading -2 as per technical specification Clouse 405.

WBM Grading -3 -Providing laying , spreding and compacting stone aggregate of 22.4-53mm size to water bound macadam specification including spreading in uniform thickness ,hand packing . Rolling with smooth whell roller 80-100 kn in stage to proper grade and camber ,applying and brooming ,stone screening to fill up the interstices of coarse aggregate ,watering and compacting to required density as per technical specification Clause 405.

Laying brick soling layer on prepared sub-grade with brick on edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing as per Technical Specification Clause 412 As BRICK EDGING

Prime Coat-Providing and Applying primer coat with bitumin Emulsion (SS-1) ON prepared surface og granular base including cleaning of road sufaces& spraying primer at rate of 0.70-1.0kg/sqm using macanical means as per technical Specification Clouse 502.

Tack Coat-Providing and applying Tack with bitumin emulsion distributor at the rate of 0.35kg per sqm on the prepared surfaces

Providing, laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 (13.2mm & 11.20mm in 2:1) mm aggregates either using penetration grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508.(hot mix/ paver by mechanical means )

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.

Road marking with Hot applied thermoplastic compond with reflectoristising Glass beads on bituminous surface .Providing and laying of hot applid thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gms per Sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35-2015 the finished surface to be level, Uniform and free from streaks and holes .