PVC Pipe Line

Cutting open C.C. road surface with concrete saw cutter and removal with Breaker

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Collection supply and filling of Stone Crusher Dust less than 3mm and fines not more than 10% including cost and conveyance of all materials labour charges watering and compacting etc., complete as per SS.under Bed Concrete.

Manufacture, supply, & delivery of HDPE pipes conforming to IS 4984 - 1995 including transportation to any where in A.P, including excise duty, sales tax etc., complete. (PE - 100 Grade)

Laying and jointing of HDPE pipes by butt fusion welding as per IS: II/7634 as amended from time to time to the alignment and gradient and testing the pipeling to the required pressure. (PE - 100 Grade) OD 160 mm 6.0 kg/ sqcm

Manufacture, Supply, & Delivery of HDPE (PE –100 Grade) fittings conforming to IS 4984 - 1995 including transportation to anywhere in A.P. Excluding all taxes. MS flanges OD 110mm

Collars OD 110mm

Supply and delivery of Rubber Packing including taxes and conveyance etc., complete (3 mm / 6 mm thick).

Supply and delivery of Bolts and Nuts with double washers including taxes and conveyance etc.,complete. (1/2 " to 1 ")

Bailing out water from the trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper etc., complete as per directions of the departmental authorities

Vibrated cement concrete M 30 grade design mix using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, ting, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification and as directed by the Engineer-in-Charge for C.C Pavement.

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supply and delivery of PN 1.6 Bar "Resilient seated soft sealing" Gate valves (Sluice valves) with body & bonnet of Ductile Iron GGG-40/ SG 400/15 or - 50SG-500/7 or equivalent as per I.S.1865, IS 3896-2 & wedge fully rubber lined with food grade quality grade W270 Grade EPDM, Replaceable Spindle and Nut without gland packing with 3-0 ring protection system on the shaft and seals of NBR. The valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS 5163 type A/IS 14846. All the valves should be with fusion bonded Electrostatic powder coating both inside and outside pocket (Min 250 microns) RAL 5005 with pocket less straight through body passage conforming to design standards of DIN 3202 F 4 BS 5163 Type A flange drilling as per IS:1538 including transportation complete. (Makes : AVK/VAG/DURGA/ IVC (or) approved make by department authorities and with Necessary Cap, Extension rods as per site requirements)

Labour charges for lowering and keeping in position 150 mm dia C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. including cost of jointing materials such as nuts & bolts,rubber insertion sluice valves and tail pieces.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water

Manufacture, supply, & delivery of GI Pipes of various sizes and transportation anywhere in Andhra Pradesh, excluding GST. as per

Lowering and Jointing G.I. pipes and specials / fittings including excavation of trench of 0.5m width and 0.50 m depth in all soils except rock requiring blasting and refilling trenches after laying and jointing pipes and also including cost of jointing materials but excluding the cost of pipes. Reference to specifications. BIS No.783/85 as per PH Data, as per AP Standard data

Welding of GI Pipes including welding machine, Welding Rods, Welder & labour charges etc., complete as per Lr

Engaging of Skilled & Unskilled Labour for Interconnections from HDPE to PVC/GI Pipelines as per SOR 2024-25 Fitter