Construction of Training Centre Transit Camp Building at Rishikesh

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.Including Supply of all material labour, T&P etc required for proper completion of the work

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear meter including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). Including Supply of all material labour, T&P etc required for proper completion of the work

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).. Including Supply of all material labour, T&P etc required for proper completion of the work

Centering and shuttering including strutting, propping etc. and removal of form for all heights Foundations, footings, bases of columns, etc. for mass concrete Including Supply of all material labour, T&P etc required for proper completion of the work

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Including Supply of all material labour, T&P etc required for proper completion of the work

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Including Supply of all material labour, T&P etc required for proper completion of the work

Brick work with common burnt clay F.P.S.(non modular ) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) Including Supply of all material labour, T&P etc required for proper completion of the work

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars. Including Supply of all material labour, T&P etc required for proper completion of the work

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size). Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing glass strips in joints of terrazzo/ cement concrete floors. 40 mm wide and 4 mm thick. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, Including Supply of all material labour, T&P etc required for proper completion of the work laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/Sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete. Including Supply of all material labour, T&P etc required for proper completion of the work.

Providing and laying Vitrified/Anti skidding tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622),of approved brand & manufacturer in all colours and shade, laid with cement based high polymer midified quick set tiles ahesive (waterbased) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (payment for grouting of joints to be made separately).Size of Tiles 600x600 mm. Including Supply of all material labour, T&P etc required for proper completion of the work.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 Sqm Including Supply of all material labour, T&P etc required for proper completion of the work

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. Including Supply of all material labour, T&P etc required for proper completion of the work

12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand). Including Supply of all material labour, T&P etc required for proper completion of the work

20 mm cement plaster 1:2 (1 cement : 2 stone dust). Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing pressed steel door frames conforming to IS:4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. Profile B Fixing with carbon steel galvanized dash fastener of required dia and size (to be paid for separately). Including Supply of all material labour, T&P etc required for proper completion of the work

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Including Supply of all material labour, T&P etc required for proper completion of the work

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing 25 mm thick shutters for cup board etc. :Panelled or panelled & glazed shutters : Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Powder coated minimum thickness 50 micron aluminium tubular handle bar. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing 100mm brass mortielatch & locks with 6 levrs without pair with handle(best make of approved quality)for aluminium doors including necessary cutting and making good etc. complete. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 )transparent or dyed to required colour or shade,with necessary screws etc. complete : 150x10 mm. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing 20 mm dia curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc. wherever necessary complete.including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Including Supply of all material labour, T&P etc required for proper completion of the work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer. Including Supply of all material labour, T&P etc required for proper completion of the work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Including Supply of all material labour, T&P etc required for proper completion of the work

Finishing walls with acrylic smooth exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 Sqm. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Including Supply of all material labour, T&P etc required for proper completion of the work.

S/F single piece WC with UF seat cover, hings fixing accessories set, cistern fitting size 655x665x760 , S-trap -300mm of Jaguar make model LYS-WHT-38851S or equivalent including T&P etc. required for proper completion of work. Including Supply of all material labour, T&P etc required for proper completion of the work

S/F Counter top basin size 435x505x180 of jaguar make model KUS-WHT-35601 or equivalent including T&P etc required for proper completion of work.

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 18.17.1 25 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing & Fixing Bib Cock with Flange of Jaguar make model CON-047 KN or equivalent including T&P etc required for proper completion of work. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51.1 15 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work

S/F Towel Rail 600 mm long of jaguar make model AQN -7721 or equivalent including T&P etc. required for proper completion of work

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall 15 mm dia nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore metre. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore metre. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank. Including Supply of all material labour, T&P etc required for proper completion of the work

S/F soap dish of jaguar make model AQN-7731 or equivalent including T&P etc. required for proper completion of work

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and ashers complete. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 20 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work

Making soak pit 2.5 m diameter 3.0 meter deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Including Supply of all material labour, T&P etc required for proper completion of the work

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specification. Including Supply of all material labour, T&P etc required for proper completion of the work

Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specification. Including Supply of all material labour, T&P etc required for proper completion of the work

Hand Packed stone filling in back of walls including cost of all materials, royalty, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications). Including Supply of all material labour, T&P etc required for proper completion of the work

S/F Toilet paper holder with flap of jaguar make model AQN -7753 or equivalent including T&P etc. required for proper completion of work

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): Flat surfaces. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. Including Supply of all material labour, T&P etc required for proper completion of the work

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. including Supply of all material labour, T&P etc required for proper completion of the work

French spirit polishing : 13.68.1 Two or more coats on new works including a coat of wood filler. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in- charge. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.2 Range of two urinal basins with 5 liter white P.V.C. automatic flushing cistern. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade. Including Supply of all material labour, T&P etc required for proper completion of the work.

Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 Including Supply of all material labour, T&P etc required for proper completion of the work

S/F P.V.C Pipe Nahani Trap Approved Quality complete with all accessories I/C supply of all material labour T&P etc required for proper completion of the work . Including Supply of all material labour, T&P etc required for proper completion of the work

Lettering with black Japan paint of approved brand and manufacture. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.Including Supply of all material labour, T&P etc required for proper completion of the work

Chequred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).1 Light shade pigment using white cement. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989. Including Supply of all material labour, T&P etc required for proper completion of the work

Attending minor type work like cleaning of roof terrace works and sunshades and other misc work by engaging labour for full day including all T&P etc. complete)

Attending minor type of repair for full day by engaging and supplying one suitable carpenter, Mason, plumber for carrying simple type of repairing of all suitable work including all T&P etc. complete but excluding cost of material.

Removal of debris / waste material / rubbish on road side /dismantled refuses/ park / dust bin and from any other location by full load tractor trolly within the specified colonies as desired by the Engineer-in-charge & safe disposal of the same out side the colony area including cost of all labour T& P etc. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/. Including Supply of all material labour, T&P etc required for proper completion of the work

Hire charges of welding machine with single phase with welder, helper and electrodes etc. for repair and welding of gates, door, window etc. for 8 hrs. in a day complete with all material labour, T&P etc. required for proper completion of work.(PSI) . Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. Including Supply of all material labour, T&P etc required for proper completion of the work

Filling the gap in between aluminium frame & adjacent RCC / Brick /Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 21.8.1 Upto 5mm depth and 5 mm width. Including Supply of all material labour, T&P etc required for proper completion of the work

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B Including Supply of all material labour, T&P etc required for proper completion of the work

Supply and drawing 1 x 1.5 sq. mm sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 10 sq. mm + 1 X 6 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Supplying and fixing 6 way (4 + 18), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) Including Supply of all material labour, T&P etc required for proper completion of the work

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Supplying and fixing 63 Amp. rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Supplying and fixing 3 pin, 5 amp. ceilling rose on the existing junction box/wooden block including connection etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Supplying and fixing PVC batten/ angle holder including connections etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.40 mm dia nominal bore.

Providing and fixing P.V.C Waste pipe for sink or wash basin including PVC semi rigid 32mm dia pipe.supply ofall material labour T&P etc required for proper completion of the work.

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length .15mm nominal bore Including supply of all material labour T&P etc.required for proper completion of the work.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required all door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and fixing fly proof galvanized M.S. wire gauge (Powerloom) to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required pair UTP CAT 6- 1 run of Cable

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required Group C

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, ssingle core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 pin 5/6 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (75mmX75 mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100 mmX75 mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200 mmX75 mm)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required 125 A, 16 kA,TPMCCB

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25mm. Including Supply of all Material Labour T&P etc required for proper completion of the work.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Supply & Fixing Testing and Commisoning of HALONIX Make Zephyr 1200mm 50Watt speed 280rpm Ceiling Fan White 3 blade ceiling Fan. Including Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of HALONIX Make Indoor Decorative LED Tube Light Extruded aluminium batten in Anodised finish with opal diffuser.IP20. 22W Ordering no HLB-03-22-CW-AL-HL1. Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of HALONIX Make Slim surface mounting LED Slim round Down light made of (PDCAL) With high efficient 12W LED Ordering no HLDLS-R06-12-CM. Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of HALONIX Make Slim surface mounting LED Slim round Down light made of (PDCAL) With high efficient 6W LED Ordering no HLDLS-R06-06-CW. Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of HALONIX Make EXHUST FAN -PLASTIC (HELION DX)250MM. Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of HAVELLS Make 3L Storage Instant Water Geyser (Instanio,White-Mustard). Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of Anchor Make call bell code 22740. Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing 2HP mono block water pump single phase 50m discharge outlet 40 to 50mm discharge 100-500 LPM Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of Finolix Make Camera wire product Code 65913018 RG59JFX 1*3 x0.15 sqmm CCTV white 305 mt. 3 +1. Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of Pole to Pannel make kei Aluminum Armured Cable 25Sqmm Core 4. Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of Legrand Make Legrand information socket catagary 6UTP one module . Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of LG Split AC heat & cooling KS-H18DNYD. Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of Dr Aquaguard Fusion Hot N Ambient N Cold water purifier. Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply & Fixing Testing and commisoning of Dolphy Automatic touchless hand sanitizer dispensor silver colour 880ml capacity ABS &SS Body. Incuding Supply of all Material Labour T&P etc required for proper completion of the work.

Supply Testing and Commisoning of HALONIX Make LED post top pole mounting light epoxy powder coated die casted aluminium with clear diffuser and spun aluminium lid/cover. model HLPT-04-40-CW. Including Supply of all Material Labour T&P etc required for proper completion of the work.

Supply Testing and Commisoning of HALONIX Make Led POLE INTEGRATED LIGHT epoxy powder coated extruded aluminium with modulor integral street light. model HLDPL-06-30-CW-D1-3.5M. Including Supply of all Material Labour T&P etc required for proper completion of the work.

Supply Testing and commisoning of HALONIX Make Highly efficent LED flood light made of pressure die cast aluminium housing ,suitable lensand high toughned glass potted driver with efficacy of 120lm/w, IP66 Model- HLFLD-ML-200-CWL-R-HL2-P 200W. Incuding Supply of all Material Labour T&P etc required for proper completion of the work

S/F Sink mixturewith raised J shaped wall mounted mounted model of jaguar make model CON-319KN or equivalent including T&P etc required for proper completion of work.

S/F Piller cock auto closing system with 65mm extension body of jaguar make model PRS-031L65 or equivalent including T&P etc required for proper completion of work.

S/F Urinal valve auto closing system with Built-in-Control cock & wall flange of jaguar make model PRS-077 or equivalent including T&P etc required for proper completion of work.

S/F Waste coupling 32mm size full thread with 130mm height of jaguar make model ALD-705L130 or equivalent including T&P etc required for proper completion of work.

S/F Stop cock with fitting sleeve,operating lever of jaguar make model CON-083FTK or equivalent including T&P etc required for proper completion of work.

S/F Health Faucet with 8mm dia 1.2mtr long flexible tube & wall hook of jaguar make model ALD-573 or equivalent including T&P etc required for proper completion of work.

S/F 188 Ltr Refrigerator of LG make model GL-B191KDSD or equivalent including T&P etc required for proper completion of work.

Dismantling of Two Nissan Shed of Transit Camp Caumps

Planning, Design and structural design of Building , duly vetted by IIT or from any recognised Goverenment institue including Site Visit, Submission of detailed design and Drawings and supervision for implementation of the same including cost of design Consultant/ Architect etc all required for proper completion of work complete in all aspect up to the satisfaction of Engineer in Charge. The work also includes planning and design of different associated facilities essentially required for safety and proper functioning of the building as well as facilities desired by the Engineer in charge.

VKJ Projects Pvt. Ltd.