CBF 2025-26

Earthwork in excavation for MS angle posts as per drawing and technical specification clause 305.1 including setting out, construction of shooting and bracing removal of slums and other deleterious material and disposal upto a lead of 50 m dressing of sides and bottom and blackfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH.

Providing and fixing of M.S. angle iron of size 50 × 50 × 6 mm, including cutting, fitting, and fixing in position with necessary welding/fastening, and making good the wall after fixing, complete as directed by the Engineer-in-charge. (earth work & concrete to be paid for separately)

Providing and fixing of M.S. angle iron of size 25x25x5 mm, including cutting, fitting, and fixing in position with necessary welding/fastening, and making good the wall after fixing, complete as directed by the Engineer-in-charge.(earth work & concrete, painting to be paid for separately)

Supplying & Placing Plain Cement Concrete M15 grade using 20 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site labour charges, for mixing , laying, concrete, ramming in 15 cm layers, finishing top surface to the required level etc. complete for finished item of work.

Supplying and fixing Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2½"x2½" (63 mm x 63 mm) - 8 Gauge Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanized mild steel wire, staples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately

BLD-CSTN-12-7 ( 174) : Painting, Priming Coat with Red Oxide Primer on New Iron Work including cost and conveyance of all material and all labour charges etc, including preperation of the surface duly removing all rusts and scales with steel wire brushes and wiping away all dust and dirt from the proposed surface before applying the priming coat etc, complete as per (APSS No. 1201, 1207 & 1212).

BLD-CSTN-12-12-(197): Painting with Synthetic Enamel paints - Two Coats - for New Wood Work, Old Wood Work & New Iron Work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).

Supplying and fixing of MS Gate using 45 x 45 x 6mm MS equal angle alround and 2 Nos 35x35x5mm Equal angles horizontal supports at 0.50m c/c, 2.00mm MS sheet at bottom 0.30m height and 16mm MS square bars Vertically at 100mm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surface neatly and including cost and conveyance of all materials,Locking arrangment, Ornamental pieces etc ,cutting, bending, welding including all operational charges and all labour charges etc., complete for finished item of work. for 3.00m & above 3m span gates