Biennial Service Contract for various HT and LT electrical cabling jobs at Plant, KTPS under EMOPH department

Amount

VARIOUS ELECT. CABLING JOBS

Tracing of Control cable (different size) along cable trench

Tracing of power cable (upto 35 sqmm) along cable trench

Tracing of power cable (50 to 95 sqmm) along cable trench

Tracing of power cable (120 to 300 sqmm) along cable trench

9M Octagonal steel tubular Street Light pole installation

Supply & Erection of PCC Foundation for erection of 9M Octagonal steel tubular Street Light pole

Laying of Cable on wall/surface , including supply & fixing of MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting Up to 2 Core 25 sqmm

Laying of Cable on wall/surface, including supply & fixing of MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting Up to 3/4 Core 25 sqmm

Laying of Cable on wall/surface, including supply & fixing of MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting From 3 /3 ½ Core 35 Sqmm to 3/3 ½ Core 50 Sqmm

Laying of Cable on wall/surface, including supply & fixing of MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting above3 /3 ½ Core 50 Sqmm and up to 3/3 ½ Core 90 Sqmm.

Laying of Cable on wall/surface including supply & fixing MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting above3 /3 ½ Core 90 Sqmm and upto 3 /3 ½ Core 150 Sqmm.

Laying of Cable on wall/surface including supply & fixing MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting above 3 /3 ½ Core 150 Sqmm and up to 3/3 ½ Core 185 Sqmm

Laying of Cable through existing RCC/Hume /GI Pipe,Open masonry Trench/Cable Tray for Single 2,3,,3 ½ & 4 Core up to 50 Sqmm

Laying of Cable through existing RCC/ Hume /GI Pipe,Open masonry Trench /Cable Tray for Single 2,3,3 ½ & 4 Core Above 50 Sqmm and up to 400 Sqmm.

Laying of Control Cable on Cable Tray, 2 Core to 5 Core upto 4 sq.mm

"Laying of Control Cable on Cable Tray above 5 Core 2.5 Sq. mm and upto 12 Core 2.5 sq. mm

Laying of cable up to 11 kV grade 3/3.5/4 Core x 185 sq.mm through U/G trench with necessary brick & Sand protection, Depth of Trench : 3ft(min), wide: 1.5ft

Laying of cable up to 11 kV grade 3/3.5/4 Core x 185 sq.mm through tussel/tray with necessary protection

Laying of 11kV grade 1Cx630 sq.mm AL cable on tray

Laying of the 3.5X 95 Sqmm Al U/G cable with necessary brick & Sand protection, Depth of Trench : 3ft(min), wide: 1.5ft

Laying of the 3.5X300 Sqmm Al U/G cable with necessary brick & Sand protection, Depth of Trench : 3ft(min), wide: 1.5ft

Laying of one No. cable upto 35 sqmm In underground trench 460mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of 3½X95 Sqmm Al. Cable on wall

Laying of control cable (different size) along cable trench

Laying of power cable (upto 35 sqmm) along cable trench

Laying of power cable (50 to 95 sqmm) along cable trench

Laying of power cable (120 to 300 sqmm) along cable trench

Supply & Fixing double compression Gland 2 Core above 16 and upto 25 sqmm

Supply & Fixing double compression Gland 2 Core above 25 and upto 35 sqmm

Supply & Fixing double compression Gland 2 Core above 35 and upto 50 sqmm

"Supply & Fixing double compression Gland 3 Core upto 6 sqmm

"Supply & Fixing double compression Gland 3 Core above 6 and upto 10 sqmm

Supply & Fixing double compression Gland 3 Core above 10 and upto 16 sqmm

"Supply & Fixing double compression Gland 3 Core above 16 and upto 25 sqmm

"Supply & Fixing double compression Gland 3 Core above 25 and upto 35 sqmm

"Supply & Fixing double compression Gland 3 Core above 35 and upto 50 sqmm

Supply & Fixing double compression Gland 3 Core above 50 and upto 70 sqmm

"Supply & Fixing double compression Gland 3 Core above 70 and upto 95 sqmm

"Supply & Fixing double compression Gland 3 Core above 95 and upto 120 sqmm

"Supply & Fixing double compression Gland 3 Core above 120 and upto 150 sqmm

"Supply & Fixing double compression Gland 3 Core above 150 and upto 185 sqmm

"Supply & Fixing double compression Gland 3 Core above 185 and upto 240 sqmm

"Supply & Fixing double compression Gland 3 Core above 240 and upto 300 sqmm

"Supply & Fixing double compression Gland 3 Core above 300 and upto 400 sqmm

Supply & Fixing double compression Gland 4 Core upto 4 sqmm

Supply & Fixing double compression Gland 4 Core above 4 and upto 6 sqmm

Supply & Fixing double compression Gland 4 Core above 6 and upto 10 sqmm

Supply & Fixing double compression Gland 4 Core above 10 and upto 16 sqmm

Supply & Fixing double compression Gland 4 Core above 16 and upto 25 sqmm

Supply & Fixing double compression Gland 4 Core above 25 and upto 35 sqmm

Supply & Fixing double compression Gland 3 ½ Core upto 25 sqmm

Supply & Fixing double compression Gland 3 ½ Core above 25 and upto 35 sqmm

Supply & Fixing double compression Gland 3 ½ Core above 35 and upto 50 sqmm

Supply & Fixing double compression Gland 3 ½ Core above 50 and upto 70 sqmm

Supply & Fixing double compression Gland 3 ½ Core above 70 and upto 120 sqmm

Supply & Fixing double compression Gland 3 ½ Core above 120 and upto 150 sqmm

Supply & Fixing double compression Gland 3 ½ Core above 150 and upto 185 sqmm

"Supply & Fixing double compression Gland 4 Core above 35 and upto 50 Sqmm

"Supply & Fixing double compression Gland 6 Core x 4 Sqmm

Supply & Fixing double compression Gland 10,12 Core x 2.5 Sqmm

Supply & Fixing double compression Gland 10 Core x 4 Sqmm

Supply & Fixing of Double Compression Gland for 1CX630 sq.mm Cable

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointig material upto 2 core 4 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 6 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 10 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 16 Sqmm

"Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 25 Sqmm

"Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 35 Sqmm

"Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 50 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 25 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 35 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 50 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 70 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 95 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 120 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 150 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 185 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 2.5 Sqmm

"Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 4 Sqmm

"Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 6 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 10 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 16 Sqmm

Finishing the cable of each core end by crimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 25 Sqmm

Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes upto 2.5 sqmm

Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes 4 sqmm

Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes 6 sqmm

Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes 10 sqmm

"Finishing of the PVC insulated wire end by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes 16 sqmm

End termination with socketing of control cable (up to 9 core) with gland and socket supply

End termination with socketing of control cable (Above 9 core) with gland and socket supply

End termination with socketing of power cable (up to 35 sq-mm) with gland and socket supply

End termination with socketing of power cable (50 sq-mm to 95 sq-mm)

End termination with socketing of power cable 120 sq-mm to 300 sq-mm)

Supply & Fixing of perforated GI cable tray of size 100x50x1.25mm (18SWG) with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as requiredIncl. Al painting of MS support. (Without angle iron support).

Supply & Fixing of perforated GI cable tray of size 150x50x1.25mm (18SWG) with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as required Incl. Al painting of MS support. (Without angle iron support)

Supply & Fixing of perforated GI cable tray of size 200x50x1.25mm (18SWG) with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as required Incl. Al painting of MS support. (With 25x25x3mm angle iron support).

Supply & Fixing of perforated GI cable tray of size 300x50x1.25mm (18SWG) with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as required Incl. Al painting of MS support. (With 25x25x3mm angle iron support)

Fixing of 600 mm GI Cable Tray

Equipment Earthing by earth bus bar connecting to the equipment body earthing to earth bus bar including S&F 25mmX6mm galvanized MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

Equipment earthing by connecting the equipment body to earth busbar including S&F 50mm X 6mm galvanized(Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc

Fixing of cable Tray including fixing of tray support.

LAYING OF 50/6 G.I. FLAT FOR RUNNING EARTH & DAMAGED WELDING ETC

Dismantling of Control Cable

Dismantling of 3X185 Sqmm Al. LT Cable

Dismantling of 3.5 X 35/50 Sqmm Al. Cable from Cable Trench

Dismantling of 3.5 X 300 Sqmm Al. Cable from Cable Tray/trench

Dismantling of 3.5 X 185 Sqmm Al. Cable from Cable Tray/trench

Dismantling of St. Light Pole Damaged JB and 4X16 Sqmm Cable End & re-termination cable New JB

Dismantling of 9 M old damaged Street Light pole

Supply & Jointing of 3½X95 Sqmm Al. Cable St. Through

Supply & St. Through Jointing of 3½ X 35 Sqmm Al. Cable

Supply & St. Through Jointing of 3½ X 50 Sqmm Al. Cable

Supply & St. Through Jointing of 5 X 2.5 Sqmm control Cable

Jointing of control cable (upto 9 core) with jointing kit

Jointing of control cable (above 9core) with jointing kit

Jointing of Power cable (upto 35 sqmm) with jointing kit

Jointing of Power cable (50 to 95 sqmm) with jointing kit

Jointing of Power cable (120 to 185sqmm) with jointing kit

Jointing of Power cable (300 sqmm) with jointing kit

Straight Through Joint including supply of material [Heat Shrinkable jointing kit of reputed make ] for the 6.6/11 kV grade cable 1 Core x 630 sq.mm AL

End jointing including Supply of Material [Heat Shrinkable End joint kit of reputed make ] for the 6.6/11 kV grade cable 1 Core x 630 sq.mm AL

Straight Through Joint including supply of material [Heat Shrinkable jointing kit of reputed make ] for the 6.6/11 kV grade 3 Core 185 sq. mm XLPE Cable

End Jointing including supply of end jointing kit for the 6.6/11 kV grade 3 Core 185 sq. mm XLPE Cable

Straight Through joint including supply of material for the 1.1kV grade cable up to 7 Core x 2.5-4.0 sq.mm Cu

Straight Through joint including supply of material for the 1.1kV grade cable 8-14 Core x 2.5-4sq.mm Cu

Straight Through Joint including supply of material for the 1.1kV grade cable 3/3.5/4 Core x 16-35 sq.mm AL

Straight Through Joint including supply of material for the 1.1kV grade cable 3/3.5/4 Core x 50-95 sq.mm AL

Supply & Socketing of 3.5 X 300 Sqmm Al. cable

Supply & Socketing of 3.5 X 185 Sqmm Al. cable

Laying of 1CX630 Sq.mm 6.6KV XLPE Cable on cable tray/trench.

Laying of 3X240 sqmm Al 6.6kV XLPE underground cable, with supply of 16 nos. bricks per mtr.

Laying of 300mm dia. GI/MS pipe for road crossing of 3X240sqmm 6.6kV XLPE U/G Al cable

Laying & termination of 11KV Cable Laying & termination of 3Cx95sq.mm , 11 KV grade, XLPE armoured power cable at underground trench of with 460mm wide and side with sand filling. Cable will be lay on sand which will be covered by brick as said. with 24 (Twenty Four) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. Gap between two laid cable will be 350mm x 760mm at average depth of 1Mtr, with brick protection on top

Supply, Delivery & installation of 1C, 630 Sqmm, 6.6 KV, XLPE end termination including kit & termination charge. (Make: 3M)

Supply, Delivery & installation of 1C, 630 Sq.mm, 6.6KV, XLPE straight through jointing Kit (Make: Raychem) & jointing charge

Supply,delivery & installation of 3 x 240 sqmm 6.6KV XLPE cable St- Through Jointing Kits. Tapex type. Make- 3M with jointing charge

Supply,delivery & installation of 3 x 185 sqmm 6.6KV XLPE cable St- Through Jointing Kits. Tapex type. Make- 3M with jointing charge

Supply and Termination of End Termination kit 3X185sqmm 6.6kV XLPE cable

End termination cable alongwith kits. End termination of 3CX95Sq.mm 11KV grade Al Cable along with supply of Jointing Kits(Heat shrinkable of Make:3M/Raychem)complete with all accessories including lugs.

Supply & fixing of HT tape (use upto 33 kv)

Supply & fixing of PCC cable marker

Cutting & Testing of 3 x 240Sqmm 6.6KV XLPE U/G Cable

Soil cutting & Ash cutting of inside Cable trench

Termination of 3X185 sqmm 6.6kV XLPE AL cable End.

Straight through jointing of 3X240sqmm XLPE cable

Charges towards jointing of 3X185 sq mm XLPE Cable

"Dismantling of Al. 1C, 630 Sq.mm, 6.6KV XLPE cable end

Dismantling of 3X185sqmm old damaged 3X185sqmm 6.6kV XLPE cable termination kit.

Dismantling of 3X240 sqmm 6.6kV XLPE underground cable ( 1.5m depth)

Cleaning of 3X185sqmm XLPE compound type cable end

Fixing of Cast Iron Cable route marker on concrete foundation along with supply.

Tracing of 1C, 630 Sq.mm 6.6KV, XLPE, Al cable

Erection of 9 M long steel tubular pole

Supply and fixing of bend pipe

K.B.ENTERPRISE (BID ID -6724244)

UNIT ELECTRIC WORKS (BID ID -6724645)