In Ward 08, construction of boundary wall, pathway, painting, benches, dustbins, swings and horticulture work in the park in front of the Shiv Temple on Stadium Road.

Dismantling of existing cement plaster including disposal of refuse as directed by the E/I within a distance 60m.

Scraping old white or colour wash including disposal of refuse as directed by the E/I within a distance 60m.

First class B/w in 1:4 Cement C'sand mortor in F/P including supply of all meterial labour t&P etc required for proper completion of work SI N0. 305(i)

First class B/w in 1:4 Cement C'sand mortor in S/S including supply of all meterial labour t&P etc required for proper completion of work SI N0. (305+307)

12 mm thick plaster in 1:5 cement & c'sand mortor over brick work minimume thickness not less then 10 mm including all supply of meterial , Labour T&P etc S.I.No. 584(i)

Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E / I.

Fabrication of Mild steel or iron work of grill and stair case railling (When not included in an overall rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts and wastage etc. and there fixing if required for proper completion of work.(S.I.No.502c)

P/Laying 2mm thick plaster of paris putty for proper complition of the work as per Direction of E/I all complete As per D.S.R. No. 13.26

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per D.S.R. 13.46.1

Two coat painting with synthetic enamel paints on new plain surface with primer of approved quality of colour by E/I.

Supply & fixing of DESIGNER DUST BIN (MONKEY) ITEM NO. DB-03 fixing at above all parks as per Diection of E/I all complete

Excavation in foundation in ordinary Soil (Loam, Clay or sand) including, lift upto 1.50 M and lead Upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30.0m from the foundation trencches.( S.I. No.251) (Excluding Royalty)

Providing and laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 stone ballast 40 mm gauge) and curing complete, including cost of form work in foundation and floors-completion of the work as per direction of E/ I. (S.I No. 281)

First class B/w in 1:4 Cement C'sand mortor in F/P including supply of all meterial labour T&P etc required for proper completion of work.

12 mm thick plaster in 1:5 cement & c'sand mortor over brick work minimum thickness not less then 10 mm including all supply of meterial , Labour T&P etc required for proper completetion of the work.

Finishing wall with Acrylic smooth exterior paint of required shade new work ( two or more coat applied @1.67ltr./10 sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm ) as per D.S.R.No. 13.46.1

Cement Concrete with 2cm gauge approved stone ballast, approved coarse sand and cement in proportion of 1:2:4 including supply of all material labour and T&P etc. required for proper completion of the work.

Supplying of Earth for cutting or in embankment in ordinary soil earth work in filling or embankment to be in 20 cm layers, including ,watering ,Dressing ,compacting ,ramming the soil to achive 95% proctor density ,and dressing the surface to be required levels and slope and also including 1.50m lift and 30 m lead . The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m distance and cartage upto 8Km distance as directed by the Engineer-in-charge excluding royalty

Supply and Laying of C.C Interlocking Tiles 80mm thick in road pavement having a compressive strength not lass than 300 kg / cm2 including 40 mm thick bed of fine sand of F/M 1.25 with a specification ratio of coarse material stone grit of size 8 mm to 12 mm in ratio 2:3 and fine material port land cement & coarse sand 1 : 1 -1/2 and mix it coarse material with ratio 3:2 and top sarface of tile at least 5mm thick with mix of cement and marble dust with ratio 1:1 provide the machanical pressure of 380 kg/cm2 at the time of manifacture of tile. In the manifacture of tiles the use of cement 7.5 begs of 50 kg to 8.5 bages per m,3 and labour, including supply of all material, T&P for proper completion of the work, and joint filled with fine sand, also including as per direction of E/I (zig-zag and 20% coloured tiles)

S/F chest press 100 NB GI B-class Pipe LEG FRAME: 32 NB GI B-CLASS Pipe MAIN FRAME: 40 NB GI B-CLASS Pipe HANDLE FRAME: 32 NB & 25 NB GI B-CLASS Pipe LEG REST: 32NB & 25NB GI B-CLASS PIPE WITH TWO HANDLES Handle cover: Nylon 66 injection moulded. SEAT & BACK REST: LLDP Roto moulded seat with inbuilt bolts 3/8" X 1.5". BOTTOM COVER: Base Cover for 100 NB-PP injection moulded (Only for Self-Standing items). STOPPER: PU ROD. 50MM DIA PIPE CAP: Nylon 66 injection moulded. BEARING CAP: Cap for 100 NB - Nylon 66 injection moulded. BEARING HOUSING AND PIN: Seamless Pipe & Round Bar BEARINGS: REPUTED MAKE (FAG/SKF) NUT BOLTS CAP: Nylon 66 injection moulded with SS M6 fasteners. POWDER COAT: DONE BY PURE POLYESTER POWDER WITH 70 80 MICRON THICKNESS. 2 Wheel/ Shoulder Twirl MAIN FRAM MADE UP 100 NB GI

S/F Hand Rower FRAME: 80 NB GI B- FUN ROWER SEAT HANDLE FRAME: 32 CLASS PIPES FUN WALKER FRAME: 80 NB GI B-CLASS PIPES NB GI B-CLASS Pipe LEG REST: 32NB & 25NB GI B- CLASS PIPE WITH TWO HANDLES SEAT & BACK REST: LLDP Roto moulded seat with inbuilt bolts 3/8" X 1.5". FOOT REST: LLDP Roto moulded seat with inbuilt bolts 3/8" X 1.5". 2 BOTTOM COVER: Base Cover for 100 NB PP injection moulded (Only for Self-Standing items). STOPPER: PU ROD. 50MM DIA PIPE CAP: Nylon 66 injection moulded. BEARING CAP: Nylon 66 injection moulded. BEARING HOUSING AND PIN: Seamless Pipe & Round Bar NUT BOLTS CAP: Nylon 66 injection moulded with SS M6 fasteners. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS.

S/F Back Extention The main frame of the Back Extension is to be made in 80 NB GL. Plipes. The handle frame is to be made up of 25 NB GL. pipe which is hinged to main Frame by a suitably designed camp. Rectangular pipe of size 50x25x3 mm thick is to be provided as supportting structure for Thigh Rest. Thigh rest or seats is to be Made up of HOPE material. Footrest is to be made up of HDPE material and Attached to main frame with the help of 40 NB GL. pipes. All pipes are to be Uniformly powder coated up to minimum 60-micron thickness to avoid comosion

S/F Cycle 100 NB GI B- CLASS PIPES ARM FRAME: 40 NB GI B-CLASS PIPES HANDLE FRAME: 25 NB GI B-CLASS PIPES LEG REST: 32NB & 25NB GI B-CLASS PIPE WITH TWO HANDLES SEAT REST: LLDP ROTOMOULDED SEAT. POWDER COAT: DONE BY PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS.

S/F of Circular pull up station The main frame of Circular Pull up Station is to be made by combinations of Different size frames. The vertical support pipes have to be made by 80 NB G.I. pipes. This vertical support pipes shall give supports to the horizontal handle bars. All different size horizontal supports have to be made up of 40 NB G.I. pipes. These different sized horizontal bar supports has to be attached at different height to the vertical frame. Separate foundation stands have to be made of 80 NB G.I. pipes and G.I. plated M.S. round plates has to be provided to each support. All pipes are to be uniformly powder coated up to minimum 60- micron thickness to avoid corrosion. All open ends of pipe are to be close by GI/HDPE caps for User safety against entrapment. POWDER COAT: DONE BY PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS

S/F of ABS Board Double MAIN FRAME: 80 NB G.I. PIPES. INTERMEDIATE PIPE: 20 NB & 25 NB G.I. PIPE POWDER COAT: DONE BY PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS

S/F of Hip Twister Double Circular MAIN FRAME: 100 NB GI B- class Pipe ARM FRAME: 32 NB GI B-CLASS Pipe HANDLE FRAME: 20 NB GI B-CLASS Pipe BOTTOM COVER: Base Cover for 100 NB-PP injection moulded. TWISTER DISC: LLDP Roto moulded seat with inbuilt bolts 3/8" X 1.5", PIPE CAP: Nylon 66 injection moulded. BEARING CAP: Nylon 66 injection moulded. BEARING HOUSING AND PIN: Seamless Pipe & Round Bar NUT BOLTS CAP: Nylon 66 injection moulded with SS M6 fasteners. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS.

S/F of Shoulder Exerciser CENTRE PIPE: 100 NB GI B- class Pipe SEAT FRAME: 32 NB GI B-CLASS Pipe MAIN FRAME: 40 NB GI B-CLASS Pipe HANDLE FRAME & LEG REST: 32NB & 25NB GI B-CLASS PIPE WITH TWO HANDLES Handle cover: Nylon 66 injection moulded. SEAT & BACK REST: LLDP Roto moulded seat with inbuilt bolts 3/8" X 1.5". BOTTOM COVER: Base Cover for 100 NB-PP injection moulded. PIPE CAP: Nylon 66 injection moulded. BEARING CAP: Cap for 100 NB - Nylon 66 injection moulded. BEARING HOUSING AND PIN: Seamless Pipe & Round Bar BEARINGS: REPUTED MAKE (FAG/SKF) NUT BOLTS CAP: Nylon 66 injection moulded with SS M6 fasteners. POWDER COAT: DONE BY PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS.

S/F of leg press Double CENTRE PIPE: 100 NB GI B- class Pipe SEAT FRAME: 32 NB GI B-CLASS Pipe SEAT & BACK REST: LLDP Roto moulded seat with inbuilt bolts 3/8" X 1.5". FOOT REST: LLDP Roto moulded seat with inbuilt bolts 3/8" X 1.5". BOTTOM COVER: Base Cover for 100 NB-PP injection moulded. PIPE CAP: Nylon 66 injection moulded. BEARING CAP: Nylon 66 injection moulded. BEARING HOUSING AND PIN: Seamless Pipe & Round Bar BEARINGS: REPUTED MAKE (FAG/SKF) STOPPER: PU ROD. 50MM DIANUT BOLTS CAP: Nylon 66 injection moulded with SS M6 fasteners. 2 POWDER COAT: DONE BY PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS.

S/F Sky/Cross walker 100 NB G.I. PIPES. FOOT REST PIPE: 40 NB G.I. PIPE FOOT REST: LLDP Roto moulded seat with inbuilt bolts 3/8" X 1.5". BOTTOM COVER: Base Cover for 100 NB-PP injection moulded. HANDLE: 25 NB CLAMPS: NYLON 66 INJECTION MOULDED CASING Handle cover: Nylon 66 injection moulded. BEARINGS: REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS.

Supply and Instalation of Open Air Gym Outdoor Equipments including cost of loading and unloading & fixing labour as per direction by E/I

Supply and Placing of Doormat on the floor of open gym area including loading and unloading and labour as per direction by E/I

Azadirachta indicia ( Neem ) height 120-130cm in big polybag size 25 cm.

Tectona grandis (Teak) height 150-165 cm. in big polybag size 25 cm.

Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pot of size 20 cm.

Ficus benghalensis (Banyan) height 120-135 cm. in big poly bag size 25 cm.

Mangifera indicia (Mango-grafted ) height 60-75 cm. in big poly bag size 25 cm.

Polyalthia longifolia (Ashok) height 150-165 cm. in earthen pot size 25 cm. & Providing and stacking of Polyalthia pendula (Ashok Pendula) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge

Providing and Displaying of Araucaria cookie having ht. 90 cm to 120 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of earthen pot/plastic pot.

Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Adansonia digitata (kalp vricksh) ht 150-165 cm in bag size 25 cm.

Dalbergia sissoo (Seasam) height 120-135 cm. in big poly bag size 25 cm.

Delonix regia (Gulmohar) height 150-165 cm. in big poly bag size 25 cm.

Magnolia grandiflora height 150-165 cm. in big poly bag size 25 cm.

Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.

Providing and stacking of Grevillea robusta (Silver Oak) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Heterophragma adenophyllum (Marore fali) of height 150-165 cm. in Big poly bag of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Inga dulcis (Jungle Jalebi) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Phyllanthus emblica (Amla) of height 150-165cm. in Big HDPE Bag as per direction of the officer-in-charge.

Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.

Bassia latifolia (Mahua) height 90-105 cm. in big polybag size 25 cm.

Bauhinia purpurea (Kachnar) height 150-165 cm. in big poly bag size 25 cm.

Cestrum nocturnum (Raat ki Rani) of height 60-75 cm. with 4-5 branchesv in bag of size 25 cm.

Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flowers / flower buds in 20 cm Earthen pot/ Plastic pot

Tamarindus indica (Imli) height 120-150 cm. in big polybag size 25 cm

Marigold jaffri dwarf in different colour well developed with fresh & healthy foliage with 12 to 15 flowers in full bloom specimen 23 to 30 cm ht. in 20 cm Earthen Pot/Plastic Pot.

Tulsi of ht. 30cm with multi branches in Poly bag of size 20 cm.

Satavari, well developed in earthen pot of size 20cm

Anjeer of height 75-90 cm. in poly bags of size 25 cm

Ashwagandha of ht. 30cm with multi branches in Poly bag of size 20 cm.

Shankhpushpi well developed in poly bag of size 20cm

Bajradanti well developed in poly bag of size 20cm

Karonda of ht. 45-60cm in Poly bag of size 25 cm.

Aprajita Blue well developed in poly bag of size 20cm

Aprajita white well developed in poly bag of size 20cm

Bottle palm ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bag size 25 cm

Papaya ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bag size 25 cm

Guava ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bag size 25 cm

Sunflower hybrid well developed 15 to 20 cm ht. with fresh & healthy foliage at blooming stage in 20 cm Earthen Pot/Plastic Pot

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge

Bamboo 18 to 20 cm girth and 90 cm height