CERTAIN REPAIR / MAINTENANCE OF FITTINGS AND FIXTURES, DBS, SUBMAIN WIRING, ELECTRIC GEYSER, SOLAR WATER HEATER AND ALLIED ELECTRIC WORK AT NAUSENA BAGH AND NOFRA UNDER GE NAVY PORBANDAR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc

Taking down unservicable/partly unscrewing from boards/outlets light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes

M & L for Point wiring with PVC insulated unsheathed stranded copper conductor cable FRLSH of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface or concealed in wall with MS sheet metal sunken switch/Terminal box 1.2 mm thick including all necessary wall cutting and making good disturbed surface all as directed and specified. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

(a) One light point controlled by one, one way switch

(b) One ceiling /exhaust fan point controlled by one switch and regulator

(c) One 3 pin 5 amp socket out point on the same board with other switches.

(d) One3 pin 5 amps socket out let point on independent board

(e) One bell/buzzer point controlled by one bell push.

(f) One light point controlled by two 2-way switches

Ditto all as per same in item No. 3.00 above but for one socket outlet 15 amp on independent board with 2.5 Sq.mm cable and 2.5 Sq.mm earth wire all as specified and directed by EIC.

Ditto all as per same in item No. 3.00 above but for one socket outlet 15 amp on independent board with 4.0 Sq. mm cable and 4.0 Sq.mm earth wire all as specified and directed by EIC.

S &F Switch piano flush type single pole one way 5 amps all as specified and directed by EIC.

S &F Switch piano flush button type two way 5 amps all as specified and directed by EIC.

S &F Socket out let 2 in one with cover plate, 5/3 pin 5Amp all as specified and directed by EIC.

S & F Modular switch 2 way 6A with cover plate, 1 module all as specified and directed by EIC.

S & F Modular switch 1 way 6A with cover plate, 1 module all as specified and directed by EIC.

S & F modular socket, Socket, 6A - 2/3 pin combined 2 module with cover plate all as specified and directed by EIC.

S & F modular socket 16A - 2/3 pin combined 2 module with cover plate and box, all as specified and directed by EIC.

S & F Modular switch 1 way 16A, 1 module with cover plate and box all as specified and directed by EIC.

S & F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type with pvc box universal all as specified and directed by EIC.

S & F Switch socket combination 5 in 1, 5 pin 16 Amps flush type with pvc box universal all as specified and directed by EIC.

S & F Ceiling rose, surface bakelite 65x50 mm three terminal all as specified and directed by EIC.

S & F Call bell AC-230 Volt single pole ding dong all as specified and directed by EIC.

S & F Bell push, flush type 5 Amps all as specified and directed by EIC.

S & F Modular bell push 6A, 1 module with cover plate all as specified and directed by EIC.

S & F Electronic Fan regulator 2 module 100/120 Watt step type all as specified and directed by EIC.

S & F Modular fan regulator 120Watt, 2 module, AC 240 Volts complete all as specified and directed by EIC.

S & F Lamp holder insulated body with back plate for angle holder all as specified and directed by EIC.

S & F LED tube light fittings 1x20 Watt, 220V, AC decorative box type with driver,holder including LED Tube light connecting up with 3 core flexible cppper conductor cable with sutable size from ceiling rose complete all as specified and directed by EIC.

S & F LED tube light fittings mirror type with high output diffuser 2 feet ,1x10 Watt ,220V, AC decorative box type with driver,holder including LED Tube light connecting up with 3 core flexible cppper conductor cable with sutable size from ceiling rose complete all as specified and directed by EIC.

S & F Decorative light ftting, PVC body, oval in shape & LED lamp suitable for wall fitting including connecting up with 3 core flexible cppper conductor cable with suItable size complete all as specified and directed by EIC.

S & F Driver for garden LED 10 W light Crompton complete all as specified and directed by EIC.

S & F LED post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light complete with IP65 protection with impact and corrosion resistant complete with driver and lamp etc all as specified and directed by EIC.

S & F earth enclosure with 2 pin earth plug sokcet complete with MCB SP 25 amp, flush mounting type all as specified and directed by EIC.

S & F triple pole and earth enclosure with a three pin and earth plug with sokcet complete with one triple pole MCB 32 Amp all as specified and directed by EIC.

S & F triple pole and earth enclosure with a three pin and earth plug with sokcet complete with one triple pole MCB 63 Amp all as specified and directed by EIC.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces all as specified and directed by EIC.

M & L for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2 Single core of size 4 Sqmm, earth continuity conductor of size 4.0 Sqmm to be drawn through and including PVC CASING CAPING/PVC Conduit not less then 25mm dia medium Grade fixed on walls/roof/floors all as specified and directed by EIC. Notes:- (i)Two wires of 4 sqmm and one wire of 4.0 sqmm and one run of PVC casing caping/Conduit shall be measured as one unit.

M & L for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC CASING CAPING/PVC Conduit not less then 32mm dia medium Grade fixed on walls/roof/floors all as specified and directed by EIC. Notes:- (i)Four wires of 6 sqmm and one wire of 6.0 sqmm and one run of PVC casing caping/Conduit shall be measured as one unit.

M & L for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2 Single core of size 10 Sqmm, earth continuity conductor of size 10 Sqmm to be drawn through and including PVC CASING CAPING/PVC Conduit not less then 32mm dia medium Grade fixed on walls/roof/floors all as specified and directed by EIC. Notes:- (i) Two wires of 10sqmm and one wire of 10 sqmm and one run of PVC ccasing caping/Conduit shall be measured as one unit.

Supply and fix ceiling fan blade set of 3 of 1200 mm/1400mm sweep size all as specified and directed by EIC.

Supply and fix clamps with rubber bush for holding 1200 mm/1400mm sweep size fan with fan rod all as specified and directed by EIC.

S & F MCB DB made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade, 415Volts TPN with 4 way Double door all as specified and directed by EIC.

S & F MCB DB made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail, 240Volts SPN with 8 way Double door, IP-43-IK09 protection all as specified and directed by EIC.

S & F MCB DB made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail, 240Volts SPN with 12 way Double door IP-43-IK09 protection grade all as specified and directed by EIC.

S & F MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 40 to 63 Amps all as specified and directed by EIC.

S & F MCB TP 415 Volts, 'C' series, breaking capacity 10 KA of rating 25 to 63 Amps all as specified and directed by EIC.

S & F MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 to 63Amps all as specified and directed by EIC.

S & F MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps all as specified and directed by EIC.

S & F MCB SP 240 Volts 'C' series, breaking capacity 10 KA of rating 6-32 Amps all as specified and directed by EIC.

S & F RCCB DP 100 mA of rating 6 A-25 Amps all as specified and directed by EIC.

S & F MCB DP upto 25 Amps rating type C Optipro : INDO ASHIAN Model no. 811170 all as specified and directed by EIC.

S & F MCCB TPN 63 Amps , 415Volts, 16 KA all as specified and directed by EIC.

M & L for Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-5 of 1991 (part-I) all as specified and directed by EIC.

Taking down fan of any make/type/sweep,sealing cable end ,dismantling of blades and for repair /overhauling complete all as specified and directed by EIC.

M & L for Overhauling of ceiling fan / wall fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same including small screw and bolts, fixing and connecting on its existing position and testing on completion all as specified and as directed. (Note:- (a) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (b) The spares (bearing, bush, capacitor, pin) required shall be measured and paid separately in the relevant items).

M & L for Rewinding of ceiling fan, segregation of unserviceable parts, cutting and removing out burnt copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spare parts will be measured & paid separately) including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and supply and fixing the following items and including necessary transportion to workshop, for 1200/1400 mm sweep fan all as specified and directed by EIC. (i) Split pin - 02 Nos (ii) Connection block - 1 No (iii) Insulation rubber bush - 01 No

Fixing or hanging only ceiling fan after overhauling/repair of winding above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed by EIC.

M& L for Painting of ceiling fan / Wall fan of any sweep complete including fan blade down rod with synthetic enamelled paint by spraying including cleaning and removing dust, dirt, oily particles by chemicals, making smooth surface for painting, filling cavities with filler all as specified and directed by EIC.

Taking down exhaust fan, of any size and PVC, Mettalic any type for cleaning/servicing removing oil particles by chemicals and overhauling the same, refixing the same on its existing position and connection up all as specified and directed by EIC.

M & L for Rewinding of exhaust fan 225 to 300 mm sweep, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spare parts will be measured & paid separately) including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and including necessary transportion to workshop all as specified and directed.

Fixing only Exhaust fan after winding fan under item No. 88 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan (max up to 1m length) all as specified and directed by EIC.

Supply only gun metal bush of any size all as specified and directed by EIC.

Supply only bearing for ceiling fan all as specified and directed by EIC.

Supply only fan condensor 2.5 MFD all as specified and directed by EIC.

Supply only fan condensor 4 MFD all as specified and directed by EIC.

S& F canopy of ceiling fan bottom and upper side of size 1200/1400 all as specified and directed by EIC.

S & F Wooden frame of suitable size and length for fixing of exhaust fan in existing hole including all nut/bolts complete all as specified and directed by EIC.

M & L for opening the geyser 25/50 ltr capacity and taking out inner tank and glass wool from inside the geyser , descaling & washing with acid to remove the scales, dirt etc if any and refixing the same after reassembly into geyser and proper filling of new glass wool around inner tank complete all as specified and directed by EIC. (Note:- Glass wool will be measured & paid separately under relevant item of the schedule)

S & F Glass wool pf any colour complete all as specified and directed by EIC.

S & F of Geyser inner water storage tank of any type capacity 25 ltr make of metal stainless steel all as specified and directed by EIC.

S & F Fusible plug suitable for 25 Ltrs Cap storage type water heater including provn of necessary GI fittings removal of existing valves fixed in repair / replacement complete all as specified and directed by EIC.

S & F Heating element upto 2KW capacity of storage type water heater of compatible type (ISI Marked) including making all connections by replacing inter connecting copper conductor cables and removal of old unserviceable elements fixed in repair / replacement complete all as specified and directed by EIC.

S & F Thermostat suitable for 25/50 ltrs capacity storage type water heater including removal of old unserviceable ones fixed in repair / replacement complete all as specified and directed by EIC.

S & F Indicator lamp assembly complete for water heater (geyser) suitable to work on AC 230 volts supply and to match the existing size any type including disconnecting and fixed in repair / replacement complete all as specified and directed by EIC.

S & F Drain plug brass with washer suitable for 25 ltrs geysers fixed in repair / replacement complete all as specified and directed by EIC.

S & F Geyser heavy duty connecting pipe 600/450mm long made out of branded flexible pipe with brass female coupling for connecting geyser outlet to existing connecting point 15 mm dia fixed in repair / replacement complete all as specified and directed by EIC.

S & F anchor bolts / Fastner 75mm long made out of stain less steel for proper fixing of geysers complete all as specified and directed by EIC.

Supply & fix PVC insulated and FR PVC Round Sheathed, copper conductor (flexible) industrial cable of size 1.5 Sqmm 3 core, 1100 volt, conforming to IS 694 complete all as specified and directed by EIC.

Supply & fix plug top 3 pin 15 Amps 240 V, ISI complete all as specified and directed by EIC.

S & F Thermosyphonic type solar water panel of size suitable for solar water heater capacity of 100 Ltr including taking out old unservicable panel after opening inlet/outlet connections by dismantling existing rusted /broken gate valve, GI/CPVC pipe and all connection and including descaling lines ,making functional after carrying out repairs/replacement including nut bolt, washer, welding work, including complete testing after installation fixed in repair / replacement complete all as specified and directed by EIC.

S & F PVC globe or gate valve with plastic knob, socket on both ends for UPVC pipe, ISI marked of size 25mm bore including taking up old valve, complete all as specified and directed by EIC.

S & F PVC globe or gate valve with plastic knob, socket on both ends for UPVC pipe, ISI marked of size 20mm bore including taking up old valve, complete all as specified and directed by EIC.

shree chamunda enterprise

BABUBHAI BHIMABHAI PANDAVADRA

jagdish machinery stores

Dara Paras.D

K K Construction Co

fakhrie apostrical