Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC MORKANDA ROAD BALNATH NURANI TOWER 2ND FLOOR BLOCK NO 301 JAMNAGAR 361001 | JAMNAGAR | JAMNAGAR | GUJARAT | 361001 | L1 | Accepted-AOC L1 AND REASONABLE | |
| 2 | L2₹35.4 L+₹2.1 L (6.26%)Rejected-Finance | L2 | Rejected-Finance NOT L1 |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
26 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY JAMNAGAR
INFANTRY LINES JAMNAGAR
SP REP TO ALL WCTOILET IN BLDG NO P332 SINGLE LIVING ACCN OR PROVISION SEPTIC TANK AT EQUIPMENT PARK NEAR BLDG NO P2015 P220 P336 PROVN OF HARD STANDING FOR VEHS AT FIP POINT AND NEAR BDE GR TOILET IN OFFICE COMPLEX FOR SIG AT MIL STN JAMNAGAR
2022_MES_548262_1
8931
Open Tender
Civil Works
Item Rate
180 days
jamnagar
CLASS D CAT a(I)
6 documents required · 6 mandatory
₹500
Yes
ge army jamnagar
₹68,000
Yes
12 Oct 2022
27 Aug 2022
28 Sept 2022
13 Sept 2022
26 Sept 2022
13 Sept 2022
Amount
Taking down all existing roof treatment and demolition of cement concrete padding/levelling course incl wire brushing and cleaning loose dust etc from surfaces of RCC roof incl flashing and juntion of parapet complete all as specified.
M&L cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified.
M&L 25mm thick PCC 1:2:4, type B0 (using 12.5mm size stone aggregate) as levelling course incl finished even and smooth using extra cement complete all as specified
M&L 10mm thick screed bed in cement plaster 1:4 on padding layer for roof treatment with WPC complete all as specified
Supply only water proofing compound all as specified and directed.
M&L Water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment / specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less 150 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm 9 minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:- (i) Laying of APP based membrane shall be done by torch on method and as per manufacturer's instructions. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and all overlaps and joints are properly sealed as per manufacturer's instructions. (iii) Applying two coats of Bituminous aluminium paint on top of APP membrane cover including testing on completion complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubbing down with water etc.
M&L 10 mm thick rendering on internal wall surfaces in cement plaster 1:6 on fair faces incl finished even and smooth w/o using extra cement all as specified.
M&L for 5 mm thick rendering in CM 1:3 over ceiling surfaces complete incl finishing the surfaces even and smooth w/o using extra cement.
M&L 15 mm thick rendering in two layers of 10mm in CM 1:6 & top layer of 5 mm thick in CM 1:4 on external stone wall surfaces with WPC incl finished even and smooth w/o using extra cement all as specified.
Preparation of newly plastered surfaces of wall incl sweeping clean with brush to remove loose dust, sand, etc and applying two coats of heavy duty waterproofing coat (Dr Fixit Wounderproof-1 or equivalent) by mixing water @ 25-30% to make slurry coating and allow 4 to 6 hrs time for drying up of first coat before application of second coat in perpendicular direction of first coat and further left to dry for 4 hrs complete all as specified and directed as per manufacturer instructions.
M & L for preparation of new plastered surface of wall and applying two coat of white wash all as specified and directed
M&L preparation of newly plaster surfaces of walls over 10cm width and applying two coats of weather coat exterior paint over a coat of priming paints plaster coat including necessary surface preparation.
M & L for preparation of new plastered surface of ceiling and applying two coats of white wash
M&L preparing old surfaces of ceilings by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss & efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling etc complete all as specified and as directed by Engineer-In-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site. Note - rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing
S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.
S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 100mm long
S&F in Aluminium handles, cast type, anodised 100mm long
S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21
M&L Powder coated aluminium sliding window shutters, aluminium section including necessary joining cleats, glazing clips, Aluminium grill (Design no 20 of decogril or eq of make specified ) and F/h type frame, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.) or hinges type B-21 100 mm long (2 nos.), suitable handle or Star lock, (1 no.) gasket,Aluminium wire cloth 0.45mm dia of f wire and average width of aperture 1.40mm incl necessary channel frame work and 5mm thick float glass including fixing arrangement and clips complete all as specified and as shown on drawing NOTE : (ii) Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, etc (iii).comprising frames of section No : 20831 three track top, 20832 three track bottom, 20736 top and bottom shutter, 20738 inter lock, incl "C" channel and "L" angle, roller bearing, rubber beading, consealed lock,
S&F powder coated anodised Aluminium ventilator with fixed aluminium frame of size 60mmx40mmx1.98mm fixed in vertical position with aluminium vertical members and half portion to be provided with aluminum heavy duty adjustable loovers and 4mm thick pinhead glass and remaining portion to be louvered using 4mm thick pinhead glass and louvered portion covered with Aluminium wire cloth 0.45mm dia of f wire and average width of aperture 1.40mm incl Aluminium grill (decogrill Design no 20) and F/h type frame, rubber neoprene packing, anodised aluminium snap beading, screws, complete all as specified and as shown on drawing Note : Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading grill loovers etc
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar .
M & L for Glazed ceramic tiles, coloured (light colour as approved), of size 450X 350X 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
M&L coloured Non skid ceramic joint free floor tiles 7-8mm thick (Square / rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm set and jointed in neat cement slurry and pointed in coloured cement over and including bedding layer 15 mm thick in cement mortar 1:6 complete all as specified and as directed.
M&L 20mm thick Granite(of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in CM 1:3 all as specified and directed
Moulding to Granite(single or double) slab including rounding off edges for 20 mm thick slabs including grinding and polishing
Demolition of concrete of any description and in any position not other wise specially provided for cement concrete (unreinforced) and all as specified and directed.
M&L 25 mm thk Cement concrete type B-1 , 1:2:4 (20 mm graded aggregate) as in levelling course below floor finish complete all as specified.
S&F 20mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, incl taking down old pipe any type complete all as specified and as directed.
S&F 25mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, incl taking down old pipe any type complete all as specified and as directed.
S&F in repairs Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.
S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.
S&F in repair 110mm PVC (SWR) branch piece, single (single Y) equal or unequal
S & F PVC (SWR) bends 110mm dia bore any radius with access door all as specified and directed.
S & F PVC (SWR) bends 75mm dia bore any radius with access door all as specified and directed.
S&F 75 mm dia PVC (SWR) Nahani trap plain with grating incl jointing with solvent cement all as specified and directed.
S&F bib taps cast copper alloy chromium plated, fancy type, long body, concealed type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore all as specified and as directed.
S & F 15mm Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, joint with adhesive taflon type screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle scerwed both ends for iron pipe or for unions.
S&F in repairs Brass CP wall Mixer for mixing hot & Cold water screwed down for iron pipe and fixed.make and joint with adhesive , taflon tape :
S&F in repairs Soap dish any type fixed to plugs with chromium plated brass screws.
S&F in repair CP Tubular towel rail 20mm dia.D Type 60 cm Long aluminium anodised complete all as specified
S&F in repair decorative type Mirror of 5/6 mm thick with beveled /grind without beading and CP screw with plugs as specified and all as directed by Engineer-In-Chagre
S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including CI 'P' or 'S' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish with and includingand PVC flushing pipe, 32 mm dia complete all as specified.
S&F Waste fittings,32mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed
S&F PVC connections 15 mm size with PTMT nuts of length 600mm
S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union
S/F in repairs PVC low level flushing cistern 10 litres capacity valve less symphonic action type, ISI Marked white with inlet, ball valve, float and handle including brackets complete all as specified and directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (Internal dia of pipe in 300 mm) complete all as specified and as directed by the Engineer-in-Charge.
M&L for reinforced concrete pipes, class NP2, 300 mm dia, laid and jointed complete with collars in trenches and jointed as specified complete all as specified and as directed by the Engineer-in-Charge
M&L for concrete bed to drain pipes of 300 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested cement concrete 1:4:8 type D-2 complete all as specified and as directed by the Engineer-in-Charge
Demolition of chajja,manole cover landing,stair case of cement concrete reinforced of cimilar suspended works complete all as specifeid
M & L RCC nominal mix type B1 1:2:4 using 20mm graded aggregate as chajja etc and incl necessary formworkall as specified.
S&F TMT Mild steel bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
S&Fvitreous china urinals,flat back of size 465mmX355mmX 265mm, Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe.white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed.
Removal of all loose/unsound/bad/damaged concrete or plaster existing RCC structure of slab/beams/walls by using chesel/hammar .Cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement . clean loose rust from bars manually with brush . fixing new supplymentary bars if required,either by tying it with existing bars or by welding on it. Applying eppoxy bonding agent and making good with polymer modified plaster/micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface in ground floor including formwork complete all as specified and directed.
Excavation in trenches n.exc 1.5M wide and n.exc 1.5 M depth for foundation and Sewage Pipe etc and n exc 10 sqm on plan for manholes and getting out in Soft/ loose soil complete all as specified and directed.
Excavation over areas n exc 1.5m deep in Hard/dence Soil and getting out all as complete as directed
Excavation over areas exc 1.5m and n exc 3.00m deep in Hard/dence Soil and getting out all as complete as directed
M & L for Cement Concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation,filling and Mass Concrete
M&L for cement concrete bedding and haunching against the sides of pipes after they are laid to 150mm bore drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) laid to falls including packing under, and tested, complete all as specified and directed. NOTE :- Pipe shall be measured and paid separately).as in repairs.
S&F DWCPE (SN8) pipes, nominal dia 150 mm laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring (depending on pipe ends) as per manufacturer instructions complete all as specified and as directed by Engr-in-Charge (ISI MArked)
M&L precast cement concrete block masonry with solid block, type C-1,1:3:6 mix ( using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.
M&L for hardcore of broken stone or boulders of gauge not exc. 63mm and deposited spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface.
M&L for Rendering in cement mortar 1:4, 15mm thick on brick walls or concrete finished even and smooth, (without using extra cement) as external surfaces of manholes as in repairs all as specified and directed.
M & L RCC 1:1.5:3 type A1 using 20mm graded aggregate as in slabs Supported on wall
Use and waste of Form work to soffits of suspended slab such as roof slab, floor slab etc. not exceeding 200mm thick fair finished.
M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in cover slabs including necessary form work etc for manholes covers set in CM 1:4 (reinforcement measured seperately)
Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exc. 25 cm depth as in any type of soil complete all as specified and directed.
Surface excavation n. exc. (not exceeding 30 cm deep and avg 15 cm deep) and getting out in sof/loose soil complete all as specified and directed.
M&L sand cushing/filling under paver block as specified and directed.
Removing excavated materials to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m from starting point.
Providing, cement concrete in kerbs type B1, 1:2:4 (20mm rounded or chamfered on edges graded aggregate) having rounded or chamfered on edges including,excavation & necessary formwork complete all as specified and directed.
M&L 100mm thick PCC type C-2, 1:3:6 (40mm graded stone aggt) as in path, hard standing, parking floors etc. complete all as specified and as directed.
S&FMachine pressed precast concrete interlocking paver block (coloured) any shape and size conforming to IS 15658-2006 of 80mm thick M-40grade (with grey cement and pigment) over 50 mm thick sand coushioning complete all as specified and directed.
Surface dressing not exc 15 cm deep in soft/loose soil.
M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling all as specified.
M&L rendering 15 mm thick in cm 1:6 on fair faces of concrete surfaces and rendering is to be finished smooth and even without using extra cement.
Preparing new plastered surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant priming on wall surfaces.
M/L for 15 mm thick rendering in CM 1;4 with using 3% of water proofing compound incl finishing the surface even & smooth with out using extra cement .(WPC shall be measured & paid separately)
M & L for preparing new plastered surfaces and applying two coats of cement based paint over a coat of primer on wall surfaces.
Filling under floor with moorum / red bajari in floor laid in layers not exc. 15cm thick, spread, levelled and rammed including watering.
M & L cement concrete tye D-2, 1:4:8 ( 40 mm graded aggregate ) 75 mm thick as in sub base of floors.
S&F butt hinges 100 mm sizes, extruded aluminium alloy with galvanised mild steel hinge pin anodised, type B-21 all as specified.
S&F aluminium anodised barrel tower bolts of extruded section 150 mm long all as specified.
S&F extruded aluminium alloy handles, fabricated type anodised size of handle in 150mm.
Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span incl formwork , reinforcement shall be measured separately all as specified and directed.
S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia.
S&F for Rolled sections as in main and cross beams, hip and jack rafters; Purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates of Fe-410-W(Gde-E-250 quality-A) (framed) etc,complete all as specified.
M&L preparation of new untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.
M & L High tensile galvalume sheets colour coated single skin high rib / multi rib TMP Profile Galvalume sheeting in roof having 1000-1020 mm width 28 mm high crest @ maximum 250 mm pitch (centre to centre) and minimum 190mm manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.
M&L for providing 75mm thick plain cement concrete( 1:3:6) type C-2 using 40mm graded aggregate as in plinth protection .
Cutting chases, pinning in , for concealed water tubing on brick walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth.
S&F 20mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, complete all as specified and as directed.
S&F 25mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, complete all as specified and as directed.
S&F 110mm bore PVC (SWR) 'P' trap, including fixed with solvent cement complete all as specified and directed.
S & F Grating doom 100mm dia of PTMT(Minimum weight 25gms) all as specified and directed.
S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) all as specified and directed.
S&F in Towel rail 450 mm long of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats
S&F stop valves, cast copper alloy, screwed down , high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15 mm bore (ISI Marked)
S&F 10 Ltr capacity PVC valveless symphonic action type flushing cistern, low level with inlet , ball valve, float all as specified including necessary flush pipe as directed.
S&F Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including waste pipe, brass waste coupling, 32 mm bore chromium plated brackets, restoring all connections, fixed in repairs,complete all as specified.
M&L 32mm dia waste fittings for pipe, brass chromium plated for glazed ware sinks, basins, etc and fly-nuts, flange end bedded in red lead cement and otherend fixed all as specified and directed.
S & F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
S & F in repairs vitreous China wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including connection to out going pipe and flushing pipe & connected items complete all as directed.
S&F soap dish, any type vitrous china white, approximate size 160X160X90mm and complete all as specified and as directed
S & F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union
Supply and fix 32mm dia low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 for wash hand basin.
S&F Rotational moulded polyethylene water storage tanks having 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 20mm ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed
Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe.
M & L for point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable 1100 volts grade drawn through non metallic rigid PVC heavy duty casing caping including accessories like bends, tees junction boxes etc with Mild/Pressed stee sunken boxes(with earth dolly) duly painted with two coats of anticorrosive paint over coat of red oxide primer externally of thickness not less than 1.2 mm covered with 3 mm thick Hylem sheet cover for fixing of switches,sockets etc concealed in wall with brass screws & washers including unsheathed single core PVC insulated FRLS cable 1.5 sqmm multi stranded copper conductor as earth wire and connecting to earth dolly, complete all as specified & directed for the following (a)One light/Fan point controlled by one way switch.
S&F switch piano flush type white /ivory finish single pole one way 5Amps 230V,complete all as specified & directed by Engineer In-charge .
S&F ceiling rose surface backelet ISI marked 2 to 3 terminal complete all as specified and directed.
Supply & Fixing LED mirror light fitting 5 Watt batten,operating voltage220-240V AC, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engr-in-Charge.
Supply & Fixing LED Batten fitting 20 Watt,aluminium housing, operating voltage 100-240V AC including 2.5 KV surge protector and round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engr-in-Charge.
Supply & Fixing LED 12W bulk head fitting not less than 1100 lumen,cool white color, IP-65 protection for outdoor application,operating voltage 150-300V AC including 2.5KV surge protector and connection up with twin core twisted flexible copper conductor cable with suitable size of 230V,50Hz complete all as specified and directed by Engr-in-Charge.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m
M&L for Sub main wiring with two runs of 4.00 sqmm single core FRLS PVC unsheathed and insulated 1100 volts grade/Multi stranded copper conductor drawn through non metallic rigid PVC heavy duty casing caping including accessories like bends, tees junction boxes etc including one run of PVC insulated and unsheathed cable of copper conductor of 4.00 sqmm single core as earth continuity wire complete all as per directed by Engr-in-Charge. Note:- Two runs of single core PVC insulated unsheated cables and one run of earth continuity conductor incl conduit will be measured and paid as one unit length only.
S&F DB sheet metal enclosure 4 way SPN for mounting MCB double door complete all as specified and directed.
S&F Isolator single pole and neutral 240 Volts 40 Amps complete all as specified & directed by Engineer-In-charge.
S&F MCB single pole 6 to 32 Amps C series all as specified and rupturing capacity 10 KA, complete all as specified and directed.
M&L for cutting of existing GI pipe line 40/50mm bore for making branch connection for 25mm bore pipe with and including inserting tee of size 40x40x25mm medium grade and make good disturbed surface complete all as specified and directed by Engr-in-charge
Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia complete all as specified and directed by Engr-in-Charge.
Supply and fix in Gun metal globe or gate valve of bore dia 20mm with iron wheel head screwed both ends for iron pipe and fixed for following size complete all as specified and directed by Engr-in-Charge.
badri glass and construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .