AR and MO various WSS under Jal Shakti Sub Division Panarsa Tehsil Aut Distt Mandi HP

Amount

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work, blasting work, chiselling of soft / hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15 cm. layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:6:12 (1 cement : 6 coarse sand): 12 graded stone aggregate 40 mm nominal size.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with: Cement mortar 1:6 (1 cement: 6 coarse sand)

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement: 6 coarse sand): With Modular bricks.

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) in all leads and lifts.

Finishing walls with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm) coat with cement primer in all leads and lifts.

Providing, Manufacturing, Supplying and Fixing of Fencing Panel of size 1.80 m x 1.20 m of Jali 25 mm X 25 mm welded to M.S.black tube of 32 mm dia of 16 guage 1.50 mm thick with M.S Flats 20 mm X 5 mm double, welded all around the pipe pannel two on both sides and providing hold fasts 4 Nos. of M.S. Flat of 32 mm x 5 mm thickness having consting of tee of size 15 cms X 15 cms tee acting as hold fasts including cutting, welding painting with red oxide paint and to the entire satisfaction of the Engineer -in - Charge.

Pitamber Lal (BID ID -535061)

NARESH KUMAR (BID ID -535053)