Kerala

Active

Works

Civil Works - Buildings

Annual Plan-Kottayi GP 2026-27,Project no 156 Truss Work in front of Kottayi Homeo Dispensary-General Civil Work

Local Self Government Department

kottayi grama panchayath | Palakkad, Kerala

Amount: ₹4.2 LCloses: 3 Oct 20266d left

Timeline

Published25 Sept 2026
Closes3 Oct 2026
Bid Opening7 Oct 2026

Tender Value

₹4.2 L

EMD Value

₹10,592

Closing Date

3 Oct 2026, 5:00 pm6d left

Tender Inviting Organisation

Name

ASSISTANT ENGINEER

Address

Kottayi Grama Panchayath AE Lid Ew Section

Work Description

Annual Plan-Kottayi GP 2026-27,Project no 156 Truss Work in front of Kottayi Homeo Dispensary-General Civil Work

Tender Information

Tender ID

2026_LSGD_872073_11

Reference Number

E-tender 01/2026-27/AE/LID EW/SECTION/KOTTAYIGP

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Location

kottayi grama panchayath

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredPRELIMINARY AGREEMENT (.pdf)

RequiredE - PAYMENT FORM (.pdf)

RequiredINTEGRITY PACT CERTIFICATE (.pdf)

RequiredAFFIDAVIT (.pdf)

RequiredFORM OF TENDER (.pdf)

RequiredSBD DOWNLOADED FROM E TENDER WEBSITE (.pdf)

Fee & Financial Details

Tender Fee Amount

₹935

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹10,592

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

25 Sept 2026

Published

25 Sept 2026

Bid Opening

7 Oct 2026

Download Starts

25 Sept 2026

Download Ends

3 Oct 2026

Submission Starts

25 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (13 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Building maintenance
1.001	2.33.2:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth	1	each	2,454.32	₹2,454.32
1.002	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	844.9	kg	194.27	₹1,64,138.72
1.003	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	241.4	sqm	842.14	₹2,03,292.6
1.004	12.41.2:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter	17	metre	400.94	₹6,815.98
1.005	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.55	cum	9,235.97	₹5,052.08
1.006	5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.	4.86	sqm	839.6	₹4,080.46
1.007	50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	2.22	cum	7,279.03	₹16,123.05
1.008	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	20.8	sqm	369.76	₹7,691.01
1.009	13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)	20.8	sqm	122.44	₹2,546.75

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.28 MB

Tendernotice_2.pdf

PDF • 0.24 MB

Tendernotice_3.pdf

PDF • 0.25 MB

Work Item Documents

sbd.pdf

Tender Documents • 1.86 MB

BOQ_1479149.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Building maintenance
1.001	2.33.2:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth	1	each	2,454.32	₹2,454.32
1.002	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	844.9	kg	194.27	₹1,64,138.72
1.003	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	241.4	sqm	842.14	₹2,03,292.6
1.004	12.41.2:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter	17	metre	400.94	₹6,815.98
1.005	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.55	cum	9,235.97	₹5,052.08
1.006	5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.	4.86	sqm	839.6	₹4,080.46
1.007	50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	2.22	cum	7,279.03	₹16,123.05
1.008	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	20.8	sqm	369.76	₹7,691.01
1.009	13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)	20.8	sqm	122.44	₹2,546.75

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Building maintenance

1.001

2.33.2:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth

each

2,454.32

₹2,454.32

1.002

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

844.9

194.27

₹1,64,138.72

1.003

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

241.4

sqm

842.14

₹2,03,292.6

1.004

12.41.2:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter

metre

400.94

₹6,815.98

1.005

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

0.55

cum

9,235.97

₹5,052.08

1.006

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

4.86

sqm

839.6

₹4,080.46

1.007

50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

2.22

cum

7,279.03

₹16,123.05

1.008

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

20.8

sqm

369.76

₹7,691.01

1.009

13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

20.8

sqm

122.44

₹2,546.75