Proposed G plus 3 Construction of Mother and Child Hub at Anupnagar Block PHC in the district of Murshidabad Additional work for installation of AC Machine.

Amount

S/F of 3 core round copper cable of 2.5 sq.mm, 5/8" &1/4" copper pipe nitrile rubber insulation cover(minium 9 mm thick), 19 mm dia PVC water drainage pipe, Insulation tape, fastner, etc as per direction of EIC

Supply & installation of 25 mm PVC Drain Pipe Line (25 mm /32 mm OD,HD 1 mm thick )of the following size with 6 mm nitrile rubber insulation and with proper supports & brackets as per direction of E.I.C. (Make: Suprime/Oriplast)

Supply and laying of 1.1 KV grade copper armoured round Cable of the following sizes from IDU Unit to ODU unit for the above mentioned AC units (Make : Polycab/Havells/Gloster/Finolex)

3 core 1.5 sqmm

Supplying,fitting & fixing in position suspended boxing for return and supply air arrangement for ducting incl false ceiling for boxing of IDU with frame work of aluminium hollow section of size 50mm X 25mm (2.0mm thickness) combined with aluminium corners of size 38mm X 25mm, suspended by aluminium hollow tube section of size 38mm X 25mm having size as suitable with aluminium composit panels (ACP) - Interior grade of thickness 3.0 mm comprising of proctective film, polyester coating, primer, aluminium coil, adhesive film, polyethylene core again with one layer adhesive film, aluminium bottom coating and finally service coating as per manufacturer's specification finished with aluminium screw and silicon sealent incl.suitable arrangement of grill fixing complete in all respect including all incidental charges etc. as per direction of EIC.

Supplying, fabrication & fixing 2 Nos. M.S. Angle of size (50 mm x 50 mmx6mm) for making platform for installation of outdoor unit AC incl. drilling 2 nos holes in each Angle including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 40 mm x40mm x 6 mm in each platform in outer edge for transmitting the load centrally through 2Nos. (40 mm x 40 mm x 6 mm) Angle inserted into the exiting wall. Area of the platform is 2Mtr. x 1Mtr. or as per Machine configuration & load with adequate service access as per direction of EIC.

Supply & Fixing of Powder Coated extruded aluminium Return Air Grills with louvers but without volume controll dampers complete as per specification.

Supply and fixing flexible double canvass connection for Ductable split air-conditioners. (FR)

ANAMICA ENTERPRISE (BID ID -6220582)

WAVE7 (BID ID -6243616)