Providing false ceiling, lab tables and other minor civil works for setting up lab for work with pathogenic fungi at 3rd floor of BSB in IISER campus, Vithura

Amount

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK.

MS TABLE WITH GRANITE TOP Fabrication and installation of MS Table with Granite top . The table is made of 2"x2" x2mm MS frame under structure and 18-20mm thick granite top of approved shade is being fixed above the fabricated structure. The MS frame is being finished with approved shade of powder coat finish with all necessary base coating and supports etc as required . The counter top granite is being fixed with all necessary adhesives etc as required . The Table is being installed at the designated areas as instructed by the in charge . including necessary cutting,bullnosing the edges etc where ever required. Height of table is 900mm. (Table top area will be measured for payment)

Providing and fixing counter top Poly propylene sink of approved make and fix the material on top of the side/island tables, making suitable inlet conncetion isolated by angle valve and providing outlet connections to the already provided drains/pipe lines by means of botte trap, and flexible tube of PP and ' with solvent cement and necessary fitting as per the standard ,totally leak free complete as shown in drawings and as directed by EIC- Sink size 450x350x250 mm

Providing and fixing Pillar type 3way water tap with swivelling GOOSENECK Spout made up of PP handle & Brass with surface protected by Epoxy Powder Coating of approved colour ,ABS knobs and shall have a water flow capacity of around 30 lit/min at 3kg/sqcm Pressure & working temperature range of 0-70oc with test pressure 9kg/sqcm & max working pressure of 10kg/sqcm. Suitable arrangement shall be provided to connect the tap to the existing water mains by means of CPVC pipes all as in drawing, technical specifications and as directed by IISER TVM.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound) content less than 50grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour

Two coats or more coats

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work