TOKEN NO. GE/K-31/2024-25 - REPAIR TO FLOORING, PLUMBING, JOINERY, PERIODICAL SERVICES AND MISC B/R WORKS INCLUDING WIRING WORK IN VARIOUS UNITS AT BUDHKHARBU AND HENISKUT UNDER GE KARGIL

Amount

Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises., complete all as specified and directed by Engr-in-Charge.

Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.

M&L for 25 mm thick plain cement concrete type B-0 (12.5mm graded stone aggregate) 1:2:4 as in floor complete all as specified and directed.

M&L Non-skid coloured tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4, complete all as specified and directed by Engr-in-Charge.

M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square / rectangle) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors etc set and set and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15mm thick screed bed in CM ( 1:6) complete all as specfied and directed.

M&L Vitrified coloured/light tiles 600x600x10mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4, topping layer finished even and rough.

M&L for Glazed ceramic coloured tiles of size 450mmx300mmx7mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4), complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, PVC, pulp, insulation etc) or insulation boards/ slabs /blankets, any thickness including cover fillets, complete all as specified and directed by Engr-in-Charge.

Supply & fixing 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber rame work as in wall complete all as specified and directed by Engr-in-Charge

Supply & fixing 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber rame work as in ceiling complete all as specified and directed by Engr-in-Charge

Dismantling timber scantlings fillets, rails, posts, rafters,purlins, etc. under 40 sqcm in section in unframed work complete all as directed.

Supply & fixing second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed.

Supply & fixing 25 mm thick second class teak wood beading rectangular/square /rocked in shape weight finished of size no exc 3 sqcm fixed with screwed duly frenched polished (two coats) all as specified and directed.

M&L for 2nd class softwood Moulding as in cornices, picture rails and the like n.exc 6 Sqcm complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge.

Supply & fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, wall etc with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

Supply & fixing 0.63mm thick plain galvanised, mild steel sheeting in ridges hips, valley gutters, drip and straight flashings (length and girht as fixed ) with grade of zinc coating 275complete all as specified and directed by Engr-in-Charge.

M&L for preparing surface of steel & iron work of any description exc 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantling PVC water tanks of capacity exc 500 but n exc 1000 ltr and removing to store complete all as specified and directed.

Supply & fixing 1000 Ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 2 Nos 25 mm dia tank nipple and 1 No 32 mm dia drain plug all as specified in SSR Part I complete all as specified and directed.

Dismantling PVC water tanks of capacity exc 250 but n exc 500 ltr and removing to store complete all as specified and directed.

Supply & fixing 500 Ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 2 Nos 25 mm dia tank nipple and 1 No 32 mm dia drain plug all as specified in SSR Part I complete all as specified and directed.

Supply & fixing in repair one piece EWC with soft closing seat cover and fittings complete, 710 x 370 x 745 mm, modern curvy design with flushing efficiency 3.90/2.10 LPF complete, the shade of EWC to be approved by Engr in Charge, complete all as specified and directed.

Taking up or down steel tubing & connections, including cleaning for re-fixing or removal to store of 20mm bore, complete all as specified and directed by Engr-in-Charge.

Supply & fixing 3-layer PP-R Polypropylene random copolymer) concealed pipes 20mm SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc

Taking up or down steel tubing & connections, including cleaning for re-fixing or removal to store of 25mm bore, complete all as specified and directed by Engr-in-Charge.

Supply & fixing 3-layer PP-R Polypropylene random copolymer) concealed pipes 25mm SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc

Taking down PVC pipe, eaves and gutters (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Supply & fixing 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply & fixing 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply & fixing in repairs 20mm PP-R Gate valves (brass insert) as per requirement of the site fixed complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed

M&L rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed

M&L for two coats of oil bound distemper on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed

M&L for two coats of cement based paint on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed

M&L for one coat of oil bound distemper on old plastered surfaces of walls including preparation of surfaces.

M&L for one coats of cement based paint on old plastered surfaces of walls including preparation of surfaces.

Supply & fixing in repair Aluminium anodised, barrel tower bolts complete all as specified and as directed.

Supply & fixing in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M&L for preparing old steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Supply & fixing in repair PVC low level flushing cistern 10 Ltr capacity with & including brackets for fixing to walls complete and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sqcm , all as specified and as directed.

Supply & fixing stainless steel squatting pan of pattern “long pan”, size 580 x 440 mm standard ivory with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe).

Supply & fixing in repairs vitreous china wash basin white, flat, flate back size 630mmx450mm excluding taps,waste pipe,chain and plug and procelain stopper but including brackets complete all as specified and directed.

Supply & fixing in repairs 32mm dia PVC waste pipe for WHB, urinals etc complete all as specified and directed.

Supply & fixing in repair Pillar taps cast coper alloy,with capstan head 15mm bore screwd down high pressure with or without lettred 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron Pipe chromium plated fancy type

Supply & fixing in repairs 15 mm dia bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

Supply & fixing in repair PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair towel rail 600mm long of PTMT fixed with and including chromium pated brass screws.

Supply & fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

Supply & fixing in repair grating doom 125mm dia with or without hole

Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.

Point wiring for light/fan/bell with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate,flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch.

All as per Srl item No 54.00 here in before for one 3 pin 5 Amps switch socket on same board.

All as per Srl item No 54.00 here in before but using cable size 2.5 Sqmm (phase,neutral and earth) for one 3 pin socket outlet 5 Amps independent board.

All as per Srl item No 54.00 here in before but using cable size 2.5 Sqmm (phase,neutral and earth) for one 3 pin socket outlet 15 Amps independent board.

Supply & fixing Switch piano flush type 5 Amps, single pole one way.

Supply & fixing Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.

Supply & fixing Switch socket combination 2 in 1, 5 and 15 Amps flush type.

M&L of ceiling rose on PVC square blocks surface bakelite 3 terminal complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply & fixing in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing Complete all as specified and directed.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing Complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete 6000K/3000K with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, Voltage 230 V, 50Hz, RPM 1200, copper winding of sweep 250 Complete all as specified and directed.

Note : Deduction for amount of Rs 22,022.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S BHAT ENGINEERS (BID ID -3079174)