Construction /Re-construction of rooms, ramps etc. at BC Bazar School, Ambala Cantt.

Amount

Dismantling Brickwork built in C. Motar all as specified in MES SSR 2020.

Dismantling RCC work/R:B:C in roof, floors (other than ground floors), beams, Staircases, landing including reinforcement cut as required to facilitate demolition complete all as sp. in MES SSR 2020.

Earth work in excavation in trenches n.exc. 1.5 M wide and 1.5M deep and getting out, returning filling in, including spreading & leveling in layers all as specified in MES SSR 2020.

M/L PCC bed 1:5:10 in fillings & Mass concrete all as specified in MES SSR 2020.

M/L RCC work 1:1½:3 for slabs supported on walls, columns , roofs, landing, balconies, canopies deck slabs and in shelves and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC works.

M/L RCC work 1:1½ :3 for foundation including raft footing foundation beams plinths beams bases for columns basement slabs under reamed piles and mass concrete and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC works.

M/L Brickwork in C. Mortar 1:4 Straight or curved on plan exe. 6 m mean radius with sub class 'A' bricks all as specified in MES SSR 2020

Providing and laying autoclaved aerated cement blocks masonry with 150 mm/230 mm/300 mm thick AAC Blocks in supersturcture above plinth level upto floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-charge. (The payment of RCC band and reinforcement shall be made for separately.)

M/L sand filling under floors including watering & well ramming all as specified in MES SSR,2020

Removing of malba/dismantle material to a distance upto 05KM.

M/L screed 15-20 mm thick in C. mortar 1:4 for laying of marble/tiles all as sp. in MES SSR 2020.

S/f of Marble tiles upto 0.60 Sqm x20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing type (excluding screed) White Marble.

S/F machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified in MES SSR, 2020. (Excluding screed).

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of Foundation and Plinth Beams and similar work; vertical or to batter fair finished surface all as sp. in MES SSR 2020.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, Columns, beams, landings and similar work, not exceeding 200mm thick (Horizontal or sloping)fair finished surface all as sp. in MES SSR 2020.

S/F Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all specified in MES SSR, 2020.

M/L PC plaster 12 mm thick in cement mortar 1:4, fair finishes over and without using extra cement all as specified in MES SSR, 2020.

M/L glazed ceramic tiles 300 mm x 200mm or 300 mm x 300 mm x 7 mm thick etc. on walls set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR,2020 ( colored tiles).

M/L special quality unistone weatherdale tiles 200 mmx200mm having stone textured any color on walls set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified.

S/F Aluminium Frame (color coated) Made of Aluminium rectangular section of 1.3 mm Thickness of size 2 ½” x 1 ½” Complete including fixing of 5 mm thick Glass Black/Brown for widows, doors & partly fixed partly openable frame, including hinges door closer, handle etc. complete all as specified in MES SSR 2020.

S/F framed work such as grills, grating, cattle traps etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters, trusses, MS bar fencing, walk wais; railings; frame work of water tanks and similar work confirming to Fe 410-0 or Fe 310-0 all as specified in MES SSR, 2020.

Providing & fixing 10-12mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface (RCC ceiling surface) with design as per requirement and approved by the Engineer-in-charge all as specified in MES SSR, 2020

Putty filling two coats application of one coat of Primer followed by two coats of premium Acrylic emulsion such as Asian/Nerolac/Berger or equivalent followed by preparing existing surface to smooth Interior finish all as sp.

Putty filling two coats application of one coat of primer followed by super fine roller coat finish of spectrum or equivalent to be applied with foam Roller, Finally coated with two coat premium exterior emulsion/Apex or equivalent all as sp.

M/L for one light point or one fan point controlled by one switch with cables 1.5 Sqmm in size copper conductor PVC sheathed single core in PVC conduit all as sp. in MES SSR 2020.

M/l for modular switch 1 way 6A 1 module complete all as sp. in MES SSR 2020.

S/F of G.I pipe medium weight 20 mm dia laid in walls/Trenches including short lengths including excavation/chasing to walls and floors including making good all as sp. in MES SSR 2020.

Supply and fixing of Heat Resistant Terrace tiles (300 mm x 300 mm x 20 mm) with SRI (Solar refractive index) > 78, Solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20mm thick cement sand mortar in the ration of 1:4 (1 cement :4 coarse sand) and routing the jjoints with mix of white cement and marble powder in ration of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as sp. in MES SSR 2020.

M/L Cement Concrete Chequered tiles 30cm x 30 cm x 22 mm with sand 20 mm thick set, jointed and pointed in neat cement slurry and screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as sp. in MES SSR 2020.

Supply and fixing of stainless steel FE 304, 3" dia heavy duty round pipe including, cutting, welding rubbing buffing to smooth surface etc. complete all as sp.

Supply and fixing of stainless steel medium grade 2" dia heavy duty round pipe including, cutting, welding rubbing buffing to smooth surface etc. complete all as sp.

Supply and fixing of stainless steel medium grade 1 ½" dia heavy duty round pipe including, cutting, welding rubbing buffing to smooth surface etc. complete all as sp.

Supply and fixing of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified in MES SSR 2020.

KULWANT SINGH (BID ID -3366390)

R N COMPANY (BID ID -3365210)

R.D Builders (BID ID -3366439)

A N BUILDERS (BID ID -3365181)

Hitech builders (BID ID -3366460)