REPAIR/REPLACEMENT OF INTERNAL WIRING, ELECTRICAL FITTINGS AND FIXTURES INCLUDING DAILY MAINT OF ELECTRICAL COMPLAINTS IN MD ACCN UNDER GE (A) AHMEDABAD

Amount

Taking down carefully copper / aluminium point wiring (light, fan socket or power) through steel / PVC conduit / casing caping including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, buzzer, bell, switch sockets, etc removing and making good to the disturbed surfaces of walls/ceiling etc, with its original specification complete all as specified and directed.

M & L for point wiring concealed with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all accessories and terminated in modular sunken boxes (concealed in wall) for mounting switches, sockets, fan regulators, etc including 1.5 sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth all as specified and as directed. Note- i) The cost of cutting chases in stone /brick masonary and making good disturbed surfaces using cement mortar (1:3) shall deemed to be included in quoted rate. ii) Colour coding shall be folowed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green.

One light point controlled by one switch.

One fan point /Exhaust fan point controlled by one switch.

One light point controlled by two, two way switches.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M & L for point wiring PVC concealed conduit with 2.5 Sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all accessories and terminated in modular sunken boxes (concealed in wall) for mounting switches, sockets etc including 2.5 Sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for one socket point 16 Amp controlled by one switch. Note- i) The cost of cutting chases in stone /brick masonary and making good disturbed surfaces using cement mortar (1:3) shall deemed to be included in quoted rate. ii) Colour coding shall be folowed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green.

M & L for point wiring PVC casing caping with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable ISI marked 1100 volts grade drawn through and including wide PVC casing caping (ISI marked) with all accessories and terminated in and including PVC surface mounted modular box with modular cover plate and frame of sutable size and module including 1.5 sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable ISI marked for continuous earth conductor and connecting to earth dolly for the following :- Note: Colour coding shall be folowed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green

One light point controlled by one switch.

One fan point /Exhaust fan point controlled by one switch.

One light point controlled by two, two way switches.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M & L for point wiring PVC casing caping with 2.5 Ssqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including concealed rigid non metallic PVC casing caping medium grade not less than 20 mm dia ISI marked with all accessories and terminated in modular sunken boxes (concealed in wall) for mounting switches, sockets etc including 2.5 Sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for one socket point 16 Amp controlled by one switch. Note- i) The cost of cutting chases in stone /brick masonary and making good disturbed surfaces using cement mortar (1:3) shall deemed to be included in quoted rate. ii) Colour coding shall be folowed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green.

S&F modular switch one way 6 amp 1 module complete all as required at site or directed by Engr -In- Charge

S&F modular switch one way 16 amp 1 module complete all as required at site or directed by Engr -In- Charge.

S&FModular switch 2 way 6A, 1 module complete all as specified and directed.

S&F modular bell push, 6 amp, 1 module complete all as required at site or directed by Engr -In- Charge.

S&F door bell, Multi Music type AC, 240 volts, single pole complete all as required at site or directed by Engr -In- Charge.

S&F modular socket 6/16 - 3 pin 2 module (Twin socket) complete all as required at site or directed by Engr -In- Charge.

S&F modular socket 6 amp 3 pin 2 module (with shutter) complete all as required at site or directed by Engr -In- Charge.

S&F modular hum free electronic step fan regulator, 120 watt 2 module complete all as required at site or directed by Engr -In- Charge.

S & F in repair Ceiling rose, 3 Terminal/PVC/polycarbonate, isolated body complete all as specified and directed.

Supply and fixing of unique design 2 Module solid cover Plates and frames of Flame Retardant Material Compatible with Standard Size of Metal Flush & Plastic Surface Boxes as per existing make and type complete all as specified and as directed.

Supply and fixing of unique design 3 Module solid cover Plates and frames of Flame Retardant Material Compatible with Standard Size of Metal Flush & Plastic Surface Boxes as per existing make and type complete all as specified and as directed.

Supply and fixing of unique design 4 Module solid cover Plates and frames of Flame Retardant Material Compatible with Standard Size of Metal Flush & Plastic Surface Boxes as per existing make and type complete all as specified and as directed.

Supply and fixing of unique design 6 Module solid cover Plates and frames of Flame Retardant Material Compatible with Standard Size of Metal Flush & Plastic Surface Boxes as per existing make and type complete all as specified and as directed.

Supply and fixing of unique design 8 Module solid cover Plates and frames of Flame Retardant Material Compatible with Standard Size of Metal Flush & Plastic Surface Boxes as per existing make and type complete all as specified and as directed.

Supply and fixing Metal Concealed Boxes of 2 Module made of G.I Sheet not less then 1.2mm thick with provision of earth terminal complete all as specified and as directed.

Supply and fixing Metal Concealed Boxes of 3 Module made of G.I Sheet not less then 1.2mm thick with provision of earth terminal complete all as specified and as directed.

Supply and fixing Metal Concealed Boxes of 4 Module made of G.I Sheet not less then 1.2mm thick with provision of earth terminal complete all as specified and as directed.

Supply and fixing Metal Concealed Boxes of 6 Module made of G.I Sheet not less then 1.2mm thick with provision of earth terminal complete all as specified and as directed.

Supply and fixing Metal Concealed Boxes of 8 Module made of G.I Sheet not less then 1.2mm thick with provision of earth terminal complete all as specified and as directed.

Supply and fixing ISI Switch Boards/ Cutting Boards of 4"x4" made of sunmica Sheet not less then 0.2cm thick complete all as specified and as directed.

Supply and fixing ISI Switch Boards/ Cutting Boards of 4"x7" made of sunmica Sheet not less then 0.2cm thick complete all as specified and as directed.

Supply and fixing ISI Switch Boards/ Cutting Boards of 6"x6" made of sunmica Sheet not less then 0.2cm thick complete all as specified and as directed.

Supply and fixing ISI Switch Boards/ Cutting Boards of 6"x8" made of sunmica Sheet not less then 0.2cm thick complete all as specified and as directed.

S&F switch piano flush button single pole one way 6 amp complete all as specified and directed.

S&F switch piano flush button single pole one way 16 amp complete all as specified and directed.

S&F bell push, flush type, 6 amp 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed.

S & F in replacement Bell , AC, 230 volts, single pole complete all as specified and directed.

S &F angle & Batten Holders , AC 230 Volts ,PVC isolated body complete all as specified and directed.

S&F Non-Modular Switch socket universal (with S.Shutter & Junction box) outlet multipurpose 3-in-1 (6/16A) controlled by one switch complete all as required at site or directed by Engr -In- Charge. Make - Pressfit /Indoasian/Havells Reo / Anchor Penta PC.

Taking down carefully aluminium or copper submain wiring with PVC casing caping / PVC surface conduit and making good disturbed surfaces complete all as specified and directed.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-LS multistranded copper conductor cable (Phase - R,Y,B, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked along with accessories of following nominal sizes

2x4 sqmm + 1x4 sqmm earth wire in 20 mm dia conduit.

2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit.

Taking down old u/s light fitting of any type, any make and any capacity after disconnecting complete all as specified and directed.

Supply and fixing of LED tube light fitting 1x40W, 4 feet/ 2 feet (as required at site) long made out of pressure die cast aluminium housing and IP20 protection, PF > 0.95 , 100 Lumen/watt , CRI> 80, driver efficiency > 85% including electric connections all as specified and directed with fwg specifications Make - Havells /Bajaj/Wipro/Crompton/Halonix:- (a) Main Housing : Aluminium Extruded (b) Front Cover : PC (c) LED : LM 80 Certified LED (d) Lumen Maintenance : 50000 hours @ L70 (e) Control Gear : Electronic, CC Driver (f) Internal Wiring : Insulated Copper wire (g) Hardwares : SS & MS Zinc plated and passivated

Supply and fixing of LED light fitting 1x20W 4 feet long made out of pressure die cast aluminium housing and IP20 protection, PF > 0.95 , 100 Lumen/watt , CRI> 80, driver efficiency > 85% including electric connections all as specified and directed with fwg specifications Make - Havells /Bajaj/Wipro/Crompton/Halonix:- (a) Main Housing : Aluminium Extruded (b) Front Cover : PC (c) LED : LM 80 Certified LED (d) Lumen Maintenance : 50000 hours @ L70 (e) Control Gear : Electronic, CC Driver (f) Internal Wiring : Insulated Copper wire (g) Hardwares : SS & MS Zinc plated and passivated

Supply and fixing of LED light fitting 1x10W made out of pressure die cast aluminium housing and IP20 protection, PF > 0.95 , 100 Lumen/watt , CRI> 80, driver efficiency > 85% including electric connections all as specified and directed with fwg specifications Make - Havells /Bajaj/Wipro/Crompton/Halonix:- (a) Main Housing : Aluminium Extruded (b) Front Cover : PC (c) LED : LM 80 Certified LED (d) Lumen Maintenance : 50000 hours @ L70 (e) Control Gear : Electronic, CC Driver (f) Internal Wiring : Insulated Copper wire (g) Hardwares : SS & MS Zinc plated and passivated

S&F in repair energy efficient LED 2x2 edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications with flat diffuser as per make Halonix Cat No (HLFPR22-27-36-CQ-HL2) and LED Driver with driver efficiency >=85%, lumen output of 6500K lumens having power factor >- 0.95 constant current electronic drivers duly connected with 1 sqmm with insulated & sheathed three core flexible multistranded copper conductor cable having open & short circuit protection, reverse polarity protection and surge protection of 4KV internal. equvivalent in Philips/Wipro.complete all as specified and directed. Note: Module + Driver both should be ordered.

S&F LED Lamp 14 watt, 230 volts, 180 lumen/watt, with 5 star complete all as specififed and directed.

S&F LED Lamp 18 watt, 230 volts, 180 lumen/watt, with 5 star complete all as specififed and directed.

Supply & fixing of 15W/ Mtr LED Strip for cove lighting complete with driver & in all respect including testing & commissioning on completion as per make Havells Cat No. LHEHCPPGNN1B024 PROFESSIONAL LED strip IP-65 WH White or techno comeercial equvivalent in Philips/Wipro.

Supply and Fixing Aluminium Channel for Strip Light (without light), compatible with LED strips mentioned above, with polycarbonate diffuser cover, aluminium base, complete with screws and other fasteners, end caps, civil works, etc

supply and fixing, electric tint, frosted finish, Switchable type (Frost Tint ON and Frost Tint OFF), sticket type, for window glass (without glass), complete with adhesive sticking, driver (AC 230V)

supply and fixing, electric motorised blinds, vertical/ horizontal retracting (as required at site) with remote control, for window glass, complete with fixing, driver (AC 230V)

S & F LED light fitting 1X10W bulk head luminaires including LED light driver holder, designer type, with enamelled and bronze finish/ powder coated finish, connecting up with three core flexible copper conductor cable of suitable size

S&F in replacement, Bed side designer lamp, 5 watts, with designer ceramic or designer glassware cover, enamelled bronze base, with LED lamp, including all wiring and switches required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

Supply and Fixing Table lamp, designer hanging type, 10 watts, with designer ceramic or designer glassware dome of 600mm, enamelled bronze/ stainless steel base, with LED lamp, including necessary wiring and accessories required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

LED Backlit signboard custom made (as per design provided), laser etched, laser cut, with wattage of 15W per meter of perimeter of colour of RED/ GREEN/ Blue/ Purple/ White, with driver to run on AC supply of anti-corrosive material of frontal finish/ through thickness, as below:

Bronze

Stainless Steel

Copper

Acrylic

Hardened glass

Supply and fixing LED light fitting mirror type,with designer glass cover, enamelled bronze base, with high out put diffuser 2 feet (+/- 10%), 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED light fitting spot/surface type,with designer glass cover, enamelled bronze base, with high out put diffuser 2 feet (+/- 10%), 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing Garden Bollard post top lantern LED type, 2 feet (+/- 20%) tall, 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fixing LED light embedded within mirror, with capacitive touch ON-OFF switch, bevelled edge, Warm White and Bright White alternative Lights, round/ rectangular cut, with high output diffuser 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in 3 in 1 Wave Colour Changing Panel Circular LED light fitting including fixing arrangement on wall with suitable size for fitting capacity of LED 15 watt, complete all as specified and directed

S&F LED wall washer aluminium soft rounded corners in rectangle shape and white colour of light in both the up and down directions IP 44 ratings for uses in interiors as well as exteriors complete with 7 Watt LED complete all as specified and directed.

S&F in Wall LED light fitting including fixing arrangement on wall with suitable size of GI pipe bend into shape, clamps and nut & bolts for fitting capacity of LED 30 watt, with pressure diecast aluminum housing & polycarbonate having top opening seperate driver compartment with IP66 protection and impact resistance IK07 duly prewired connection complete all as directed.

Supply and fix Premium Borosil clear glass wall lights Crystline WL 1LS E27 BS BRS TRG having 7.5 W LED Filament lamp, canopy black powder coated with brass finish wall mounted installation with lamp base E27 make Havells Cat No LHFHALDBTN10007 equvivalent in Philips/Wipro.complete all as specified and directed

Supply and fix Margaret LED Pendant Inbuilt LED 35 W CCT :4000K lumens of suspended installation with dimensions (1065 x 450) mm make Havells Cat No LHEHAHP6IN1V035. equvivalent in Philips/Wipro.complete all as specified and directed

Supply & fixing of Recessed mounted adjustable 30 Watt LED downlight for accent lighting, White powder coated recessed mounted fixture.Pressure die cast aluminum housing with highly effecient reflector & with Dali dimmable ballast including testing & commissioning on completion with complete in all respect. all as specified and directed. engr-in-charge as per make Havells Venus NEO Rec 2x2 Cat No. VENUSNEO2x2PLR36WLED857G2 or techno comeercial equvivalent all as specified.

Supply & fixing of Recess mounted 18W LED 1'x1' White powder coated CRCA housing with LEDs. Seamless front frame with white coloured flat acrylic cover with ballast including testing & commissioning on completion with complete in all respect as per Make Havells Cat No. 11656 BCTBLR 18 ZTWH or techno commercial equvivalent all as specified.

Supply & fixing of Recessed mounted adjustable 9W LED downlight for accent lighting, White powder coated recessed mounted fixture.Pressure die cast aluminum housing with highly effecient reflector & with Dali dimmable ballast including testing & commissioning on completion with complete in all respect as per Make Havells Cat No. LHEEGEPBIE1W009 or techno comeercial equvivalent all as specified.

Supply & fixing of 8W LED foot/ step lighting fixture complete with driver & in all respect including testing & commissioning on completion as per make Wipro or techno comeercial equvivalent in Philips /Havells

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F Power unit for AC or geyser 3.5 KW 4 module including sunken modular GI metal boxes not less than 1.2 mm thick and white modular mounting plates with frame complete all as specified and directed.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and directed.

Supply & Fixing for sheet metal enclosure SPN MCB distribution board, double door with IP43 -IK09 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete all as specified and directed.

Supply & Fixing for sheet metal enclosure MCB distribution board, double door with IP43 -IK09protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification

S&F RCCB/ ELCB (as required at site) FOR EARTH LEAKAGE PROTECTION of 30mA, 63A, having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in Cricuit Breaker DBs complete all as specified and directed.

S&F Voltage Circuit Breaker for Under Voltage and Over Voltage Protection, over current, of 63A rating, having breaking capacity 10 KA, with adjustable setting and digital display, including required wiring connections with copper lugs of suitable size provided in Cricuit Breaker DBs complete all as specified and directed.

S&F Surge Protection Device for Protection against Over Voltage Surges, 275V/ 320V (as required at site) of 100A rating, having breaking capacity 20 KA, with adjustable setting and digital display, including required wiring connections with copper lugs of suitable size provided in Cricuit Breaker DBs complete all as specified and directed.

S & F Distribution board (ETPN)iron clad, double door with IP-54 1K-09 protection suitable for MCCB TP as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete Including with one MCB TP 3 pole 415 Volts 63 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measured separately).

S&F tripple pole and neutral, powder coated, CRCA steel sheet Vertical bus bar distribution board (VTPN) constructed as per IEC-61439-3 , IP-54 IK-09 suitable for 4P MCCB incomer upto 125 amp, 4 way, 415 volts, degree of protection IP 43 with metal door, recess mounted, having 200 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc as required.

S&F MCCB 125A 4 Pole suitable for mccb DB complete all as specified and directed.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp.

SPN 40 Amps

TPN 63 Amp

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm/ 1400mm (as required at site) sweep, Min air delivery 210 CFM/ 245CFM (as required at site), with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC), super silent type build, remote controlled, decorative complete all as specified and directed.

Supply and fix exhaust fan complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, super silent type, Copper winding of complete all as specified and directed.

sturdy engineering plastic body of sweep 250mm/ 150mm (as required at site)

sturdy engineering plastic body of sweep 300mm

sturdy steel body of sweep 300mm

sturdy steel body of sweep 450mm

Taking down fan, any size any make from various satellite area locations, for repair/replacement of defective parts and rehanging/refixing in its original location after reconditioning complete as specified and directed for Cieling fan of size 1200/1400 mm sweep, wall fan/Exhaust fan upto 450mm sweep. Note:- Items for reconditioning will be measured and paid separately under respective items of BOQ.

Material and labour for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed.

All as per item No 2.09 but for wall fan/Exhaust fan upto 450 mm sweep complete all as specified and directed.

M&L for removing the burnt out winding, cleaning slots, rewinding the motor with super enamelled copper wire of equivalent size to the original winding including warnishing, drying etc replacement of body screws, testing and commissioning on full load for 8 hours continous runing for Ceiling fan 1200/1400mm sweep complete all as specified and directed.

All as per item No 2.11 but for wall fan/Exhaust fan/Pedestal fan upto 450 mm sweep complete all as specified and directed..

Supply and replace capacitor 2.5/3.15/4 mfd, 240 volts, AC suitable for fans etc complete all as specified and directed..

Supply and replace ball bearing made out of high carbon steel as per existing suitable for Ceiling fan any type any size.

Supply and replace bush bearing made out of brass alloy as per existing suitable for Ceiling fan any type any size.

Supply and replace bakelite body nichrome connectors, 2 way with fixing screws of suitable size for ceiling fans any type any size including dismantling old one complete all as specified and directed.

Supply and replace 1100 volts grade PVC flexible twisted twin core cable with multistranded coppr conductor of size 23/0.0076 all as specified

Replace charcoal and Recharge with Rock Salt and hot water, of Existing Earthing as per requirement to meet SSR and NBC requirements of earthing complete all as specified and directed.

Recharge of Existing Earthing with Rock Salt and hot water, as per requirement to meet SSR and NBC requirements of earthing complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600 ×600 × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

JYOT ENTERPRIES (BID ID -3358277)

Electricals India (BID ID -3358427)