SPECIAL REPAIRS TO BUILDING NO P 40 AT HQ SAC UNDER GE AF TRIVANDRUM

Amount

Taking down chowkats or frames exc 1.5 sqm and not exc 4 Sqm each with shutters(without taking off shutters from the frame) all as directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame) all as directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed

Taking down shutters of any description exceeding 1 Sqm and n exc 2 Sqm each complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc15 cm thickness (below or above ground level, un reinforced).

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

M&L for screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L cement concrete type B0, 1:2:4( 12.5 mm graded stone aggregate) 25 mm thick as level cousrse for floor finishes..

M&L for Rendering 10 mm thick as in backing coat in Cement mortar 1:4 for fixing of dado/skirting tiles complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc .11 & not exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement.

M&L for non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exc .18 & not exc. 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement.

All as per Item No 12 above but in skirting

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match skirting/dado.

M & L 2nd class HW plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(without sash bars) edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing wiremesh etc. are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed

S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(without sash bars) edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing wiremesh etc. are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed

M & L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

M & L Cement concrete type C2 1:3:6 (40 mm graded stone aggregate as in plinth protection 75 mm etc.

Demolition of brick work or stone boulder masonry, built in Cement Mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed

S & F powder coated anodized aluminium frame or shutter for doors, windows,partitions,ventilators of any type, with one or more rebates including joining cleats for fixing etc complete all as specified.

S & F powder coated anodized aluminium window and ventilator shutters without sash bars aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber packing , anodised snap beading , screws, anodised aluminium fittings.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane Extra over sheet glass, ordinary quality,if sheet glass is ground or obscured or frosted, on one side

S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples fixed in repair

S&F in repairs second class hardwood plain fillets, square or rectangular in section, clean swan, secured with nails area exc 13 sq cm and not exc 25 Sqcm complete all as specified and directed.

S & F in repairs 18/19 mm thick Prelaminated MDF decorative choice boards on both sides with lipping on edges fixed with screws and painting to lipping portion to match with lamination as built in study table,cupboards, drawers, cupboard shutter etc complete all as specified and directed.

M&L for Contineous piano hinges, brass, bright finish with flaps 40 mm complete all as specified and directed.

S & F in repairs MS folding arrangement for built in study table top with two coat synthetic enamel painting over one coat of red oxide primer all as specified and directed.

M&L Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed

M & L 10 mm thick rendering in CM 1:6 on brick surfaces including finishing the surfaces even and smooth without using extra cement.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer in charge.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer in charge.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer in charge.

S & F 20 mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S & F 25 mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S & F 32 mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S&F in repairs health faucet with chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer in charge.

Cutting chases, pinning in, making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing, or concealed conduit wiring etc and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed by Engineer in charge.

S & F Vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) fixed in repairs complete all as specified and directed by Engineer in charge.

Supply only plastic water closet seat cover,white colour closed pattern with flat bottom and coner and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer in charge Note: Fixing charge included in S & F EWC item No 42 above.

Supply only flushing cistern 10 ltrs capacity PVC valveless,syphonic action type, low level with inlet, ball valve ,float including bracket complete all as specified and directed by Engineer in charge. Note: Fixing charge included in S & F EWC item No 42 above.

S & F in repairs Wash Basin, Vitreous China (flat back or angle back type) of size 550x400mm , includingtaking down pillar tap, cutting for and pinning in ends of brackets or erecting stand, supply and fixiing of waste pipe complete all as specified and directed by Engineer in charge. Note: Cost of fixing new pillar tap is included in this item

S & F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed by Engineer in charge.

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

Supply only 15 mm bore pillar taps, Cast Copper alloy, fancy type, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. Note: Cost of fixing new pillar tap is included in item No 45

S & F Brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to pipe or union 15mm bore,fixed in repair complete all as specified and directed by Engineer in charge.

S&F in repairs stop cock fancy type cast copper alloy (concealed type) 15 mm bore screwed down high pressure, with crutch or butter fly handle screwed both ends for suitable for PPR pipe or for unions complete all as specified and directed by Engineer in charge.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for suitable for UPVC pipes and fixed 32 mm

S & F in repairs Angle stop valve cast copper alloy fancy type 15 mm bore screwed down high pressure, with crutch or butter fly handle screwed both ends suitable for UPVC pipe or for unions complete all as specified and directed by Engineer in charge.

S&F in repirs 15 mm bore Bib tap cast copper alloy CP , fancy type chromium plated complete fixed to UPVC/PPR pipes all as specified and directed by Engineer in charge.

S&F in repairs 20mm dia towel rail CP 60 cm long between flanges fitted to wall with CP screw all as specified.

S&F in repairs PVC connection 15 mm dia 450 mm long with check nut at both side all as specified.

S&F looking mirror 600x450 mm size fixed with aluminium frame with 6mm ply wood/black board/AC building board fixed with screw fixed repairs complete all as specified and directed by Engineer in charge.

S & F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe ,flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

S & F in repairs 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed by Engineer in charge.

S & F in repairs 50 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in floor, wall etc

S & F in repairs 110 mm bore PVC (SWR) Soil, waste/rain water and vent pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed by Engineer in charge.

Supply and fix PVC (SWR) bends 75mm dia any radius complete all as specified and directed by Engineer in charge.

Supply and fix PVC (SWR) bends 110mm dia any radius complete all as specified and directed by Engineer in charge.

S&F PVC (SWR) vent cowl 110 mm complete all as specified and directed by Engineer in charge.

PVC (SWR) branch piece, double (double Y) equal or unequal 110mm

M & L for complete removal of old plastered surfaces of wall and applying two coat of oil emulsion distemper with one coat chalk whiting as preparatory to distemper complete all as specified and directed.

M & L for prepartion of old plastered surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L preparation of new plastered surfaces of wall and applying two coat of oil emulsion distemper with one coat chalk whiting as preparatory to distemper complete all as specified and directed.

M & L for preparation of old ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old wooden painted surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamal paint

M&L for preparation of old painted steel surfaces of any description over 10 cm and applying one coat of synthetic enamal paint

M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

M & L for Factory made solid panel PVC door shutter 30 mm thick (style) onsisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Butt hinges Stainless steel 100 mm long complete all as specified and directed.

S&F Butt hinges Stainless steel 75 mm long complete all as specified and directed.

M & L Aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm long

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

M & L Extruded aluminium alloy handles, fabricated type, anodised 150 mm long

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion , depth of embedded portion of hold fasts or lugs measured from the face of jamb in the wall exceeding half brick work but not exc one brick complete all as specified and directed.

M & L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate ) as Cement concrete in hold fasts complete all as specified and directed.

M & L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.

M & L granular metal/stone chips 6.6 to 12.5 mm size, spread, rolled and consolidated to gradient and camber required 50 mm thick as base for interlocking tiles

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and no pigment complete all as specified and as directed by Engr-in-Charge.

Fixing only Machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigment complete all as specified and as directed by Engr-in-Charge. Note: Serviceable tile obtained from Item No 83 shall be used.

M & L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 including finishing the surfaces even and smooth (without using extra cement) with water proofing compound (sunken portion) complete all as specified and directed by Engineer in charge.

M/L for water proofing treatment on horizontal or vertical surface with provision of oil bound bitumen primer @ 0.20kg per sqm and applying a coat of blown grade hot bitumen 85/25 or 90/15 @ 1.20 kg/sqm and providing 4mm thk APP modified water proofing membrane weighing not less than 4 kg/sqm ,reinforced with non voven polyester matt weighing not less than 160 gm / sqm as per detailed specifications and finished with solar reflective bituminous aluminium paint @ 100gm per sqm all as specified and as directed.

M & L Providing, cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in roof kerbs of mud stops, rounded or chamfered on edges (Sunken padding for spout pipe/drain out) complete all as specified and directed by Engineer in charge.

M & L Providing, cement concrete type E2 1:4:8 using 40 mm graded stone aggregate as in mass concrete (Sunken filling) complete all as specified and directed by Engineer in charge.

Supply only water proofing compound

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately). exc 250 & n exc 500 capacity in ltrs

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately). exc 500 & n exc 1000 capacity in ltrs.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc exc 250 & n exc 500 capacity in ltrs

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc.exc 500 & n exc 1000 capacity in ltrs

Dismantling water tanks and removing to store exc 250 and not exc 500 Ltr capacity

S&F rotational moulded polyethylene water storage tank three layered(Cylindrical vertical with close top) hoisted and fixed in position all as specified in repairs 500 ltrs capacity

S & F 20 mm Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed

AKASH CONSTRUCTIONS

BOB ENTERPRISES

DJ GROUP

mahadeva traders cotractor and suppliers

VIJAYA ENTERPRISES