Building Work

No figures

1 Dismentaling tiled of stone floors laid in 213.00 Sqmt 49.41

mortar including stacking of serviceable

materilas and disposal of unserviceable

materials with all lead and lift.

2 Dismentling C.I. pipes G.S.W.pipes abd A.C. 292.00 Rmt 76.96

rain water pipes with fittings and clamps

including stacking the materials with all lead

3 Dismantling santtary fittings like wash basin . 4.00 No 415.79

W.C. pan Indian and European type, flushing

tank etc.including stacking the materials with

all lead and lift

4 Applying two coats of putty & two coats of 199.89 Sqm 40.59

primer of approved brand and manufacture

on new wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other foreign

matter and sand papered smooth.

5 Wall painting (two coats) with plastic 102.61 Sqm 79.08

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

6 Wall painting (two coats) with plastic 97.28 Sqm 86.60

emulsion paint of approved brand and

manufacture on undecorated ceiling surface

to give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

7 Finishing wall with weather proof exterior 176.46 Sqm 117.40

acrylic emulsion paint on wall surface (two

coats) to give an required shape even shade

after thoroughly brushing the surface to

remove all dirt, and remains of loose

powdered materials.etc complete

8 P & L anti skid coloured ceramic tiles 30 x 30 98.00 Sqm 994.32

cm size 6 mm thick in flooring treads of steps

and landing laid on a bed of 12 mm thick

cement mortar 1:3(1-cement:3-coarse

sand)finishing with flush pointing in white

Item Rate In

Description of Item Quantity Unit Amount

No figures

9 Providing and laying white glazed tiles 6mm 114.79 Sqm 1058.21

thick in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement

10 Providing laying and jointing in true line and 110.00 Rmt 91.84

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two

metre C/C or shall be concelled as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

11 Providing laying and jointing in true line and 50.00 Rmt 72.65

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two

metre C/C or shall be concelled as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

12 Providing, laying and jointing in true line and 30.00 Rmt 834.38

level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe

line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement

including cost of all materials.

Item Rate In

Description of Item Quantity Unit Amount

No figures

13 Providing, laying and jointing in true line and 72.00 Rmt 857.65

level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe

line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement

including cost of all materials.

14 Providing, laying and jointing in true line and 30.00 Rmt 737.30

level 75 mm dia. UPVC SWRType B pipe

conforming to IS 13592-1992 with one end

plain and other end socketed with rubbering

and fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

using of PVC clamp at every 2000 mm c/c or

shall be conceled in walss as directed

including necessary fittings such as bends,

shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement

including cost of all materials.

15 Providing and fixing in PVC SWR cowel went 2.00 No 16.67

75mm dia to pipes.(B) 75mm dia.

16 Providing and fixing in PVC SWR cowel went 2.00 No 28.79

110mm dia to pipes.(B) 110mm dia.

17 Providing and fixing PVC SWR Nahni trap IS 2.00 No 585.37

14735 for drain - 100 mm diameter with jali

of the following nominal diameter of self

cleansing design with C.I scread down or

hinged grating including the cost of cutting

and making good the walls.

18 Providing and fixing water closet squatting 2.00 No 970.17

Pan (Indian type W.C. Pan) size 580mm

(Earthwork, bed concrete, foot reste and trap

to be measured and paid for separately) (A)

Vitreous China.(I) Long pattern = White

19 Providing and fixing Gun metal check or non- 6.00 No 663.43

return fullway wheel valve.(E) 40mm dia.

20 Providing and fixing ball cock of approved. 4.00 No 189.84

quality as directed.(A) Copper Metal (ii)

Item Rate In

Description of Item Quantity Unit Amount

No figures

21 Providing and fixing screw down bib taps of 8.00 No 186.83

following size.(A) Brass screw down bib tap

polished bright. (i) 15mm dia.

22 Providing and fixing pillar tap, capstan head, 6.00 No 308.73

screw down high pressure with screws,

shanks and back nuts. (i) 15mm dia.

23 Providing and fixing brass screw down stop 4.00 No 220.82

tap.(A) 25mm dia.

24 Providing and fixing S.W. gully trap with C.I. 2.00 No 1246.92

grating brick masonry chamber and water

tight C.I. cover with frame of 300mm x

300mm size (inside) with standard weight (i)

Square mouth traps (B) 150mm x 100mm

size P or R type

25 Constructing brick masonry chamber for 4.00 No 3273.41

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg. Cm2 in C.M. 1:5 precast

RCC cover 455mm x 610mm intenal

dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with

a floating coat of neat cement on walls and

bed concrete etc. complete (i) Inside

dimensions 455mmx 610mm and 450mm

deep for single pipe line.

26 Removing dry or oil bound distemper by a 376.40 Sqmt 11.58

washing and scraping and sand papering the

wall surface smooth including necessary

repairs to scratches complete.

27 Providing and fixing washbasin with single 2.00 Nos 1456.06

hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and

making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In

white colour.

28 Steel work, welded in built up sections framed 27212.03 Kg 91.08

work including cutting, hoisting, fixing in

position and applying a priming coat of read

lead paint & two coat oil paint. (A)In beams

and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like..

Item Rate In

Description of Item Quantity Unit Amount

No figures

29 Providing and fixing of Ridge flashing for roof 907.07 Sqmt 867.39

panel shall be made out of 0.5 mm thick pre

coated GI sheet . The Precoated sheet shall be

of minimum 240 mpa steel grade confirming

to IS 14246:1995 and shall have zinc coating

of minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the

sheet and polyester top coat 15-18 micron.

The PPGI Sheet shall have plastic protective

guard film of minimum 25 microns to avoid

scratches during transportation. The ridge

shall be fixed to the steel members by pop

rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of

capping/flashing etc complete.

30 Earthwork for embankment including 1230.00 Cumt 188.13

breaking clods, dressing withall lead and lift

and including watering rolling and

consolidation of subgrade in layers at O.M.C.

to required dry density including filling the

depression which occur during the process

using power roller 8T to 10T.(E) From

Borrow area within 3.0KM. lead

Total Rs.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Credit Value of Dismentalled Materials of Amount Rs. 6791.00 shall be recovered from the

1 1st Running Bill of the Contractor.

The Contractor shall exhibit a board with detailed specification and details of work as directed by

2 the Engineer-In-Charge for which no extra payment shall be made.

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore

5 in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Chikhli ( R & B ) Sub Division Navsari ( R & B ) Division

Chikhli Navsari